Taylor TW-357 manual High Temperature 4.1 Valve Open

				TW-357 REV E
		Table 1.0 Menu System
1. Temperature			4.4 Temperature Logs
1.1 Thermocouple Select			4.4.1 Thermocouple #1 Log Rate
1.2 Calibrate Temperature			4.4.2 Thermocouple #2 Log Rate
1.3 Test Temperature System			4.5 Erase Logs
2. Level Sensing			4.5.1 Erase System Logs
2.1 Test Level Sensors			4.5.2 Erase Error Logs
2.2 Set Sensor Offset			4.5.3 Erase Temperature Log #1
2.3 Sensor Positions			4.5.4 Erase Temperature Log #2
2.3.1 Start Set Point			5. Security
2.3.2 Stop Set Point			5.1 Power-On Password
2.4 Sensor Type			5.2 Menu Password
2.5 Inch/Metric			6. User Options
3. Alarms			6.1 RS-232 Settings
3.1 High-Temp Alarm #1			6.1.1 Disable RS-232
3.2 High-Temp Alarm #2			6.1.2 Set up RS-232
3.3 System Alarms			6.1.2.1Toggle
3.3.1 LN2 Supply Alarm			Handshaking
3.3.2 Sensor Error Alarm			6.1.2.2 19200 Baud (Sets
3.3.3 Remote Alarm Timer			the baud rate)
3.3.4 Lid Open Too Long			6.2 Control Options
3.3.5 Thermocouple Alarm			6.2.1 Date & Time
3.4 Test Alarms			6.2.2 Lid/Defog Settings
3.4.1 Test Audible			6.2.2.1 Defog Timer
3.4.2 Test Visual			6.2.2.2 Lid Switch Setup
3.4.3 Test Remote			6.2.2.3 Auto Defog
4. Logging			6.2.2.4 Quick-Chill
4.1 Dump Logs			6.2.3 Control By Temperature
			6.2.3.1Disable
4.1.1 Dump System Logs			Temperature
4.1.2 Dump Error Logs			Control
4.1.3 Dump Temp Log #1			6.2.3.2Temperature
4.1.4 Dump Temp Log #2			Control settings
4.2 Error Logs				6.2.3.2.1Control
4.2.1 Sensor Error Logging				Temperature
4.2.2 Low Supply Logging				6.2.3.2.2 Control
4.2.3 Remote Alarm Logging				Range
4.2.4OpenThermocouple logging			6.2.4 Freeze-Guard Options
4.2.5	High Temperature		6.2.4.1	Valve Open
Alarm Logging #1				Duration
4.2.6	High Temperature		6.2.4.2	Frozen	Valve
Alarm Logging #2				Sensor
4.3 System Logs			6.2.4.3	Valve De-icing
4.3.1 Fill Logging			6.3 Display Brightness
4.3.2	Lid	Action	6.4 About this Control

Logging

4.3.3 User Access Logs

22