Taylor TW-357 Dispose of Waste Liquid Nitrogen Safely, Electrical, Freight Damage Precautions

Page 5

TW-357 REV E

Dispose of Waste Liquid Nitrogen Safely

Dispose of waste liquid nitrogen out-of-doors where its cold temperature cannot damage floors or driveways and where it will evaporate rapidly. An outdoor pit filled with clean sand or gravel will evaporate liquid nitrogen safely and quickly.

Electrical

Electrical Shock Can Kill – the liquid level controllers used with these refrigerators operate from 16.5VAC. However, the external transformer does have an 110/220VAC primary. Do not attempt any service on these units without disconnecting the electrical power cord.

Note: Units are supplied with Taylor-Wharton approved controllers. If other liquid level controllers are used, please contact Taylor-Wharton before putting the refrigerator into service.

Freight Damage Precautions

Any Freight damage claims are your responsibility. Cryostorage systems are delivered to your carrier from Taylor-Wharton’s dock in new condition. When you receive our product you may expect it to be in that same condition. For your own protection, take time to visually inspect each shipment in the presence of the carrier’s agent before you accept delivery. If any damage is observed, make an appropriate notation on the freight bill. Then, ask the driver to sign the notation before you receive the equipment. You should decline to accept containers that show damage, which might affect serviceability.

5

Image 5
Contents Labs TW-357 REV E Table of Contents InstallationExtreme Cold Cover Eyes and Exposed Skin Safety Precautions for Liquid NitrogenKeep Equipment Area Well Ventilated Liquid Nitrogen SystemElectrical Freight Damage PrecautionsDispose of Waste Liquid Nitrogen Safely Text Format Notation General InformationLabs Cryostorage Specifications Kryos Specifications Unpacking and Inspection InstallationLiquid Nitrogen Supply Connection Repackaging for ShipmentKryos Control Field Installation Power Supply ConnectionInitial Fill OperationInterface Panel Sensor AssemblyControl Components Battery Backup Lid SwitchRemote Alarm Solenoid ValveOperating Parameters Liquid Phase StorageThermocouple Positioning Adding an Inventory Control SystemInventory Control System Layouts Labs Cryostorage System Racks are not Square Orientation is ImportantLABS-80K LABS-40K Fenwal 4R59953 Blood Bag Rack Arrangements Fenwal 4R5462 9955 Blood Bag Rack Arrangements Control Operation PowerIntroduction Normal Fill CycleMenu System Main Display ScreenHigh Temperature 4.1 Valve Open Calibrate Temperature Temperature Thermocouple SelectTest Temperature System Help ScreensSensor Type Alarms and Error ConditionsLogging System AlarmsTest Alarms Dump Logs Error LogsSystem Logs Temperature LogsErase Logs SecurityControl By Temperature Lid Switch SetupTemperature Control Settings Control TemperatureTime and Date Set Serial Communications and RS-232 SettingsUser Access Logs Freeze-Guard Options Control RangeValve Monitoring Valve Open DurationSolenoid Valve Control On Battery Backup VersionDisplay Brightness About this ControlInterface Software Battery LifeDefrosting Your LAB-Series CryoStorage System MaintenanceStrainer Cleaning Instructions Cleaning Your Taylor-Wharton CryoStorage System Making Adjustments to the Labs Kryos Sensor Assembly Kryos Kryos V9.0 & Kryos V9.0B Level Readings Default Start Fill / Stop Fill Default Auto DefogOffset Value Units of measureOhms to 18 K ohms Removing/Installing the Solenoid ValvePin View Schematics Sensor Plug SchematicPlumbing Assembly Labs Plumbing AssemblySymptoms TroubleshootingController Will Not Turn on Indicates High Liquid LevelIndicates Open Sensor Temperature reading 10 to 20 degrees warmIndicates Low LN2 Supply QCF Quick Chill Feature Will Not Operate Lid Open AlarmFill Solenoid Cycles On and Off Fill Solenoid Makes Humming NoisePower Failure Alarm Defog Feature Will Not OperatePush Buttons Will Not Respond Liquid Level Readout is IncorrectFactory Settings Level Controller Electrical/Mechanical Parts80K/40K/20K Replacement PartsTaylor-Wharton Technical Services. Phone 800-898-2657 Fax Harsco Corporation