Smeg SC112 manual Pyrolysis automatic oven cleaning on some models only, MIN 135 MIN 180 MIN

Page 31

Instructions for the user

9.6Pyrolysis: automatic oven cleaning (on some models only)

Pyrolysis is an automatic high-temperature cleaning procedure which causes dirt to dissolve. Thanks to this process, it is possible to clean the inside of the oven with great ease.

During the first automatic cleaning cycle unpleasant smells may occur due to the normal evaporation of oily manufacturing substances. This is an absolutely normal phenomenon which disappears after the first cleaning cycle.

Before starting the automatic cleaning cycle, make sure that the oven does not contain any foods or large spills from previous cooking operations inside.

During the pyrolysis cycle a door interlock device makes it impossible to open the door.

IF THE OVEN IS INSTALLED UNDERNEATH A HOB, MAKE SURE THAT THE BURNERS OR ELECTRIC PLATES REMAIN OFF DURING THE AUTOMATIC CLEANING CYCLE.

9.6.1 Before starting the automatic cleaning cycle

Pyrolysis may be carried out at any time of the day or night (if you wish to benefit from the lower cost of electricity overnight).

Before proceeding, check the following:

only the baking tray, the oven tray, the pizza plate or the cover may be left inside the oven since they will withstand the high temperatures of the pyrolysis process; all the other accessories must be removed from inside the oven.

make sure that the oven door is firmly closed.

When setting the cleaning cycle duration, refer to the chart below:

CLEANING

LIGHT DIRT

MEDIUM DIRT

HEAVY DIRT

DURATION

90 MIN.

135 MIN.

180 MIN.

During the automatic cleaning cycle the fans make more noise because they are running at higher speed. This is an absolutely normal function, intended to provide more effective heat dispersal. At the end of the pyrolysis process, the fans continue to run automatically for long enough to prevent overheating of the sides of the cabinet and the front of the oven.

33

Image 31
Contents Table of contents Instructions for USE General instructionsSafety Instructions Instructions for Disposal OUR Environmental Care Instructions for disposalGET to Know Your Oven Before InstallationChromium-plated gripper on some models Available AccessoriesPastry plate on some models only for baking Rotisserie frame on some models onlyInside light Using the OvenGeneral Description Oven racks Cooling systemDescription of the controls on the front panel DSP1Display for the function required, or the temperature First use STAND-BY setting with DSP1 onSetting the current time Operating modesModifying the data set Cooking with preset temperatureChanging the preset temperature Using the minute minderSemiautomatic cooking Programmed cooking proceduresAutomatic cooking Instructions for the user Modifying the data set during cooking Selecting a recipeAutomatic cooking with a recipe Selecting a recipe permanently Type Table of predefined recipesSecondary menu Grill Cooking with the OvenECO StaticVentilated Bottom Bottom + Circular VentilatedVentilated Static Ventilated GrillThawing TurboProving General Hints Hints on Using the AccessoriesCooking Hints for Desserts and Biscuits Cooking Hints for MeatHints for Thawing and Proving Instructions for the user Oven when Cooking tablesDesserts Using other functionsRotisserie Cooking on Pyrolytic Models only Use of the pizza plate on some models only Precautions for using the pizza plateFood stains or residues Cleaning and MaintenanceCleaning stainless steel Ordinary daily cleaningCleaning the inside of the oven Cleaning the door glazing Before starting the automatic cleaning cycle Pyrolysis automatic oven cleaning on some models only90 MIN 135 MIN 180 MIN Cleaning cycle will be shown on DSP1 Setting the cleaning cycleChanging the light bulb Extraordinary MaintenanceRemoving the door 10.2.1 With moveable levers Removing the door seal Removing doors with pinsRemoving the internal glass panels CleaningRemoving the middle glass Replacing the glass Removing the 2nd middle glass pane Removing the 1st middle glass paneInstructions for the user ERR What to do ifElectrical connection Installing the ApplianceOperation at 220-240 V~ use a type Positioning the oven Instructions for the installer