Smeg SC112 manual Cooking with preset temperature, Changing the preset temperature

Page 11

Instructions for the user

7.6.1 Cooking with preset temperature

After selection of the function required, the oven will start the cooking

procedure at the preset temperature and the symbol will come on. Cooking itself is preceeded by a preheating stage, which allows the oven

to heat to the cooking temperature more quickly. The symbol flashes on DSP2 to indicate that this stage is in progress. When the preheating

stage is over, the symbol will remain constantly on and a buzzer will sound to indicate that the food can be placed inside the oven.

On the pyrolithic models, the special defrosting and proving functions are together

in the same symbol . Set the temperature to choose the function: thawing (30°C) or proving (40°C). On the multifunction models, it is not possible to vary the temperature in the defrosting and proving functions.

7.6.2 Changing the preset temperature

The temperature preset for each function can be changed to suit the user's requirements.

At any time while cooking is in progress, turn PT1 in either direction to

increase or decrease the cooking temperature by 5 degrees at a time. (PT1 can also be held in the left or right position to increase or decrease the setting more quickly.)

7.6.3 Using the minute minder

Press PT1 once (either in the STAND-BY or ON mode). The display will

show the figures (constantly on) and the symbol (flashing). Turn PT1 to set the minutes of cooking (from 00:01 to 04:00:00). A few seconds

after the required duration is set, the symbol will stop flashing and stay on constantly; the countdown will start from that moment. Now select the cooking function required and wait for the buzzer to sound, indicating that the cooking time is over.

Press PT1 once to switch off the buzzer; extended cooking time can be set by turning PT1.

If the minute minder was set in STAND-BY mode, when the oven is activated in ON mode (selection of a cooking operation), the counter is reset to zero.

Warning: the minute minder does not stop the cooking process. It only warns the user that the preset number of minutes have passed. To switch the oven off, press PT2.

Modifying the data set

After setting the countdown, press PT1 once. The symbol starts flashing; turn PT1 to change the set duration. A few seconds after the last

change, the symbol will stop flashing, and the countdown will restart from the new value.

13

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Table of contents Instructions for USE General instructionsSafety Instructions Instructions for Disposal OUR Environmental Care Instructions for disposalGET to Know Your Oven Before InstallationChromium-plated gripper on some models Available AccessoriesPastry plate on some models only for baking Rotisserie frame on some models onlyInside light Using the OvenGeneral Description Oven racks Cooling systemDescription of the controls on the front panel DSP1Display for the function required, or the temperature First use STAND-BY setting with DSP1 onSetting the current time Operating modesModifying the data set Cooking with preset temperatureChanging the preset temperature Using the minute minderAutomatic cooking Programmed cooking proceduresSemiautomatic cooking Instructions for the user Automatic cooking with a recipe Selecting a recipeModifying the data set during cooking Selecting a recipe permanently Type Table of predefined recipesSecondary menu Grill Cooking with the OvenECO StaticVentilated Bottom Bottom + Circular VentilatedVentilated Static Ventilated GrillProving TurboThawing General Hints Hints on Using the AccessoriesHints for Thawing and Proving Cooking Hints for MeatCooking Hints for Desserts and Biscuits Instructions for the user Oven when Cooking tablesDesserts Using other functionsRotisserie Cooking on Pyrolytic Models only Use of the pizza plate on some models only Precautions for using the pizza plateFood stains or residues Cleaning and MaintenanceCleaning stainless steel Ordinary daily cleaningCleaning the inside of the oven Cleaning the door glazing 90 MIN 135 MIN 180 MIN Pyrolysis automatic oven cleaning on some models onlyBefore starting the automatic cleaning cycle Cleaning cycle will be shown on DSP1 Setting the cleaning cycleRemoving the door 10.2.1 With moveable levers Extraordinary MaintenanceChanging the light bulb Removing the door seal Removing doors with pinsRemoving the middle glass CleaningRemoving the internal glass panels Replacing the glass Removing the 2nd middle glass pane Removing the 1st middle glass paneInstructions for the user ERR What to do ifOperation at 220-240 V~ use a type Installing the ApplianceElectrical connection Positioning the oven Instructions for the installer
Top Page Image Contents