Andrew ES45T manual Tripod Mount Step

Tripod Mount

Step 1

The three-point mount in an elevation-over-azimuth configuration optimized for geosta- tionary satellite applications. The mount enables standard elevation ranges from 2°-62°, and 33°-90° with high-look strut configuration. Azimuth range is ±82°. Fine adjustment is provided in both azimuth and elevation. An example of the assembled tripod mount is provided in Figure 2.

Figure 2

Before assembling the mount, verify that all parts are present. Follow the subsequent procedures for proper installation of tripod ground mount assembly.

Loosely attach azimuth axis support (P/N 49634) and rear anchor pads (P/N 300747) to foundation pads. Refer to Figures 3 and 4.

•Use ¾-10 x 1-¼ in. hex nuts and washers

Figure 3

13 Installation Procedures