4. Operation
4.1 Switching on and off
Switching on |
Fig. 12 |
The appliance rinses automatically when switched on, if it has not been in operation for some days. This removes water that is left over in the pipes and will take no longer than 1 minute.
Switching off |
Fig. 13 |
4.2 Control knobs |
|
| Off |
Cleaning assistance | Suggested |
temperature | |
Moisture | Temperature |
control knob | control knob |
Fig. 14 |
|
Switching on
–Turn the “Temperature” control knob by one latching position to the right (Fig. 12).
The lighting goes on:
–Turn the “Moisture level” control knob to the moisture level you require.
–Turn the “Temperature” knob to the temperature you require.
When you turn the “Temperature” knob one latching position to the left, the suggested temperature for the chosen moisture level appears on the display.
100 % – 100 °C / 210 °F
80 % – 120 °C / 250 °F
60 % – 120 °C / 250 °F
30 % – 165 °C / 330 °F
0 % – 165 °C / 330 °F
When the “Moisture” control knob is turned, the moisture is displayed for a few seconds.
Switching off:
To switch off, turn the “Temperature” knob to the 0 position (Fig. 13).
The steam oven lighting goes off.
“Temperature” control knob:
The temperature can be set between 30 °C / 85 °F and 230 °C / 450 °F .
“Moisture” control knob:
You can select the following moisture levels: 100 %, 80 %, 60 %, 30 % und 0 %
13