5.2 Options menu
End
Options menu
Descaling | Temperature | |
display in | ||
| ° C / ° F | |
Start | Time display | |
Calibration | ||
24h / 12h (AM/PM) | ||
|
Time display
ON/OFF
Fig. 22 (only if appliance is switched off)
With the aid of the Options menu, you can
–choose between °C and °F on the temperature display.
–choose between 12h and 24h on the time display.
–turn the timer on and off.
–start calibration.
–reset the descaling display.
Proceed as follows:
–Turn the two control knobs to the topmost position.
–Press the (Confirm) key and keep it pressed.
–Turn the “Moisture level” knob to the right.
–Release the (Confirmation) key.
–By turning the “Moisture level” control knob, you can now choose the various functions (Fig. 22):
Position 1: temperature display either in °C or °F.
Position 2: time display in 24 hours or 12 hours (am and pm)
Position 3: optional deactivation of the time display when the appliance is off
Position 4: calibration – you can now start the calibration process when you turn the “Temperature” control knob to any position except light.
Position 5: descaling, enter water hardness
–Set the required option by pressing the + or – key.
–Press the (Confirmation) key
–To quit the options menu, turn the “Moisture” control knob back up or turn the “Temperature” control knob.
21