DCS CP-486GD, CP-484GG, CP-485GD, CP-486GL, CP-366, CP-364GL manual Safety Practices and Precautions

Page 5

SAFETY PRACTICES AND PRECAUTIONS

When properly cared for, your new DCS Appliance is designed to be a safe, reliable cooking appliance. When using this restaurant caliber appliance, use it with extreme care, as this type of appliance provides intense heat and can increase the accident potential. Basic safety precautions must be followed when using kitchen appliances, including the following:

■Read this Use and Care Manual thoroughly before using your new appliance. This will help to reduce the risk of fire, electric shock, or injury to persons.

■Begin by insuring proper installation and servicing. Follow the installation instructions which came with this appliance. Be sure to have a qualified technician install and ground this appliance before using.

■Have the installer show you where the gas supply shut-off valve is located so you will know how and where to turn off the gas to the appliance.

■If you smell gas, the installer may not have done a proper job of checking for leaks. You can have a small leak and therefore a faint gas smell if the connections are not completely tight. Finding a gas leak is not a “do-it- yourself” procedure. Some leaks can only be found with the burner control in the ON position; for your protection it must be done by a qualified service technician.

■If by some chance a burner goes out and gas escapes, open a window or a door to let the room air out. Do not attempt to use the appliance or turn any electrical switch on or off until the gas has had time to dissipate. Follow the instructions on page 1, “For Your Safety– if You Smell Gas”.

■This appliance has been factory assembled for natural or LP gas. It should be correctly adjusted from the factory.

■Do not repair or replace any part of this appliance unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.

■Children should not be left alone or unattended in an area where appliances are in use. They should never be allowed to turn knobs, push buttons, sit or stand on, and/or touch on any part of an appliance while in operation.

WARNING!

Do not store items of interest to children above or at the back of any appliance. Children could be seriously injured if they should climb onto the appliance to reach these items.

■Never store anything on the cooktop. Flammable materials can catch fire, plastic items may melt or ignite and other types of items could be ruined.

■Do not hang articles from any part of the appliance. Some fabrics are quite flammable and may catch on fire.

■If the appliance is near a window be certain the curtains do not blow over or near the cooktop burners; they could catch on fire.

■Do not use water on grease fires. Turn all burners OFF, then smother fire with a metal lid, baking soda or use a dry chemical or foam-type fire extinguisher.

■Never let clothing, pot holders, or other flammable materials come in contact with, or get too close to, any burner or burner grate until it has cooled. Fabric may ignite and result in personal injury.

■Be certain to use only dry pot holders: moist or damp pot holders on hot surfaces may cause burns from steam. Do not use a towel or other bulky or frayed cloth in place of pot holders. Do not let pot holders touch hot burners, or burner grates.

3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Professional GAS Cooktop Page If You Smell Gas Message to OUR CustomersTable of Contents Safety Practices and Precautions Safety Practice and Precautions Recommendations on HOOK-UP to GAS Supply Model Identification Before Using Your Appliance Simmering Cooktop USEBurners Electronic Igniters Burner Efficiency and Flame CharacteristicsFlame Height Cooktop BurnersControl Knobs Burner GratesCookware Grill USE Grilling Hints Griddle USEUSE of the Griddle Before Using the Griddle for the First Time or to RE-SEASONGriddle Cooking Chart When Cleaning the Cooktop Care and MaintenanceBrand Name Cleaners CooktopIgniters For Hard to Clean SOIL, USE this EmthodSump Area around Burners and Igniters Drip Trays and Drain TubesTo remove drip tray if needed GriddlePower Failure Backguard if installedItem Description Parts IdentificationRanges & Cooktops TroubleshootingIf the Cooktop Burners do not Light HOW to Obtain ServiceBefore YOU Call for Service Limited Warranty WarrantyHOW Long does this Limited Warranty LAST? This Warranty does not CoverNo Other Warranties HOW to GET ServiceCommercial USE LA Table DE Cuisson À GAZ Professionnelle Veuillez Conserver CE Manuel À Titre DE Référence Notre ClientèleTable DES Matières Mesures DE Sécurité ET DE Précaution Mesures DE Sécurité ET DE Précaution Remarque Recommandations Concernant LE Branchement DU GAZIdentification DU Modèle Table DE Cuisson Avant Dutiliser Votre AppareilCuisson À Petit FEU Utilisation DE LA Table DE CuissonBrûleurs Efficacité DES Brûleurs ET Caractéristiques DE LA Flamme Allumeurs ÉlectroniquesHauteur DE LA Flamme Brûleurs DE Table DE CuissonBoutons DE Réglage Grilles DES BrûleursUstensiles Utilisation DU Gril Tableau DE Cuisson DE LA Plaque Chauffante Utilisation DE LA Plaque ChauffanteUtilisation DE LA Plaque Chauffante Marque DE Nettoyants Entretien ET MaintenanceDurant LE Nettoyage DE LA Cuisinière OU Table DE Cuisson Zone DE Collecte Autour DES Brûleurs ET DES Allumeurs AllumeursPlaque Chauffante RAMASSE-GOUTTES ET Tubes DégouttementPanne Dalimentation Dosseret si installéDescription Identification DES PiècesCuisinières ET Tables DE Cuisson DépannageSI LES Brûleurs DE LA Table DE Cuisson NE Sallument PAS Pour Lobtention DE ServiceAvant Dappeler LE Service Technique Fisher & Paykel Sengage À GarantieQuelle EST LA Durée DE Cette Garantie LIMITÉE? NE Sont PAS Couverts PAR LA GarantieAucune Autre Garantie Pour Obtenir DES RéparationsUtilisation Commerciale

CP-364GD, CP-486GD, CP-364GL, CP-366, CP-486GL specifications

DCS (Dual Control Systems) has made significant strides in the world of dynamic control solutions, with their new line of products, namely the CP-484GG, CP-485GD, CP-486GL, CP-366, and CP-364GL. Each model is designed with a unique set of features and advancements that cater to various applications within industrial and commercial settings.

The CP-484GG is particularly noteworthy for its enhanced graphical user interface, offering operators intuitive touch controls and customizable layouts. This model boasts a high-resolution display, making it easier for users to monitor system performance in real time. The CP-484GG is built on a robust platform that supports multi-protocol communication, ensuring seamless integration with existing control systems.

Next in line, the CP-485GD emphasizes the importance of data processing speed. With an embedded intelligent processing unit, the CP-485GD can handle complex calculations and manage multiple control loops simultaneously without sacrificing performance. One of its standout features is the advanced predictive maintenance technology that anticipates potential failures before they occur, reducing downtime and maintenance costs significantly.

The CP-486GL takes innovation a step further with its focus on energy efficiency. Designed to minimize power consumption while maximizing output, this model incorporates energy harvesting technology that captures and reuses energy within the system. The CP-486GL is compatible with renewable energy sources, making it a sustainable choice for modern facilities looking to decrease their carbon footprint.

The CP-366, on the other hand, is engineered for versatility. This compact control panel offers a wide range of I/O options, allowing users to configure it for various applications. The CP-366 comes equipped with high-speed data logging capabilities, enabling detailed analysis of operational data over time, which is crucial for process optimization.

Lastly, the CP-364GL stands out for its durability and rugged design. Built to withstand harsh environmental conditions, the CP-364GL is ideal for use in outdoor settings or industrial areas where exposure to the elements is a concern. Its corrosion-resistant materials and IP67 rating make it an excellent choice for demanding applications.

In summary, DCS's CP-484GG, CP-485GD, CP-486GL, CP-366, and CP-364GL reflect the company's commitment to innovation, efficiency, and reliability in control solutions. Each model comes equipped with cutting-edge technologies that enhance performance and adaptability for a range of industries, paving the way for smarter, safer, and more efficient operations.
Top Page Image Contents