DCS CP-486GD, CP-484GG, CP-485GD, CP-486GL, CP-366, CP-364GL Burner Grates, Cookware, Control Knobs

Page 12

COOKTOP USE

BURNER GRATES

The burner grates are heavy cast iron. They have a flat surface making it easy to move large pans from one burner to another. They were designed in sections to make them easier to remove and clean. (See Fig. 04 & 05)

COOKWARE

For best results we recommend using profes-

sional cookware. This type of utensil can beFig. 04 (485 models)Fig. 05 (36” & 48” models) found at your finer department stores, specialty

cooking shops, or restaurant supply stores. If

using regular cookware, be very careful if the pans have plastic handles, as these large professional size burners can flame up on the outside of the pan and melt or bubble the handles.

CONTROL KNOBS

The control knobs are readily associated with the burners they control. The cooktop control knobs are labeled and are in front of the burners. The griddle controller is placed slightly lower than the other control knobs. This is due to the physical size of the commercial type thermostats used on the product.

WOK RING [Purchase separately]

A Wok ring is available as an accessory for your new DCS appliance. To purchase a wok ring accessory (model # WRS) for use on your range or cooktop please contact an authorized DCS Dealer. The ring is cast iron, and has a porcelain enamel finish. It can be used with the DCS model CW wok and most commercially available woks. To use the ring, place it on the grate over the desired burner. The vertical tabs on the ring should be aligned with the main fingers of the grate. The small protrusions on the bottom surface of the ring should straddle the grate fingers to prevent the ring from rotating during cooking. See Fig. 06. The bottom of the wok should be supported and retained by the vertical tabs of the ring.

For best performance on 36” and 48” models, the

 

ring and wok should be used on the burners that are

 

in positions 1,4,5, and 6 (see page 9) as they have

Fig. 06

the highest output on the top section. To clean the

 

wok ring, place it in the dishwasher after use.

 

Stubborn food deposits may be removed by soaking

 

to loosen the soil, then washing as usual.

 

10

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Professional GAS Cooktop Page Message to OUR Customers If You Smell GasTable of Contents Safety Practices and Precautions Safety Practice and Precautions Recommendations on HOOK-UP to GAS Supply Model Identification Before Using Your Appliance Cooktop USE BurnersSimmering Burner Efficiency and Flame Characteristics Electronic IgnitersFlame Height Cooktop BurnersBurner Grates CookwareControl Knobs Grill USE Griddle USE Grilling HintsBefore Using the Griddle for the First Time or to RE-SEASON Griddle Cooking ChartUSE of the Griddle Care and Maintenance When Cleaning the CooktopBrand Name Cleaners CooktopFor Hard to Clean SOIL, USE this Emthod IgnitersSump Area around Burners and Igniters Drip Trays and Drain TubesGriddle To remove drip tray if neededBackguard if installed Power FailureParts Identification Item DescriptionTroubleshooting Ranges & CooktopsHOW to Obtain Service Before YOU Call for ServiceIf the Cooktop Burners do not Light Warranty Limited WarrantyHOW Long does this Limited Warranty LAST? This Warranty does not CoverHOW to GET Service Commercial USENo Other Warranties LA Table DE Cuisson À GAZ Professionnelle Notre Clientèle Veuillez Conserver CE Manuel À Titre DE RéférenceTable DES Matières Mesures DE Sécurité ET DE Précaution Mesures DE Sécurité ET DE Précaution Recommandations Concernant LE Branchement DU GAZ RemarqueIdentification DU Modèle Avant Dutiliser Votre Appareil Table DE CuissonUtilisation DE LA Table DE Cuisson BrûleursCuisson À Petit FEU Allumeurs Électroniques Efficacité DES Brûleurs ET Caractéristiques DE LA FlammeHauteur DE LA Flamme Brûleurs DE Table DE CuissonGrilles DES Brûleurs UstensilesBoutons DE Réglage Utilisation DU Gril Utilisation DE LA Plaque Chauffante Utilisation DE LA Plaque ChauffanteTableau DE Cuisson DE LA Plaque Chauffante Entretien ET Maintenance Durant LE Nettoyage DE LA Cuisinière OU Table DE CuissonMarque DE Nettoyants Allumeurs Zone DE Collecte Autour DES Brûleurs ET DES AllumeursRAMASSE-GOUTTES ET Tubes Dégouttement Plaque ChauffanteDosseret si installé Panne DalimentationIdentification DES Pièces DescriptionDépannage Cuisinières ET Tables DE CuissonPour Lobtention DE Service Avant Dappeler LE Service TechniqueSI LES Brûleurs DE LA Table DE Cuisson NE Sallument PAS Garantie Fisher & Paykel Sengage ÀQuelle EST LA Durée DE Cette Garantie LIMITÉE? NE Sont PAS Couverts PAR LA GarantiePour Obtenir DES Réparations Utilisation CommercialeAucune Autre Garantie

CP-364GD, CP-486GD, CP-364GL, CP-366, CP-486GL specifications

DCS (Dual Control Systems) has made significant strides in the world of dynamic control solutions, with their new line of products, namely the CP-484GG, CP-485GD, CP-486GL, CP-366, and CP-364GL. Each model is designed with a unique set of features and advancements that cater to various applications within industrial and commercial settings.

The CP-484GG is particularly noteworthy for its enhanced graphical user interface, offering operators intuitive touch controls and customizable layouts. This model boasts a high-resolution display, making it easier for users to monitor system performance in real time. The CP-484GG is built on a robust platform that supports multi-protocol communication, ensuring seamless integration with existing control systems.

Next in line, the CP-485GD emphasizes the importance of data processing speed. With an embedded intelligent processing unit, the CP-485GD can handle complex calculations and manage multiple control loops simultaneously without sacrificing performance. One of its standout features is the advanced predictive maintenance technology that anticipates potential failures before they occur, reducing downtime and maintenance costs significantly.

The CP-486GL takes innovation a step further with its focus on energy efficiency. Designed to minimize power consumption while maximizing output, this model incorporates energy harvesting technology that captures and reuses energy within the system. The CP-486GL is compatible with renewable energy sources, making it a sustainable choice for modern facilities looking to decrease their carbon footprint.

The CP-366, on the other hand, is engineered for versatility. This compact control panel offers a wide range of I/O options, allowing users to configure it for various applications. The CP-366 comes equipped with high-speed data logging capabilities, enabling detailed analysis of operational data over time, which is crucial for process optimization.

Lastly, the CP-364GL stands out for its durability and rugged design. Built to withstand harsh environmental conditions, the CP-364GL is ideal for use in outdoor settings or industrial areas where exposure to the elements is a concern. Its corrosion-resistant materials and IP67 rating make it an excellent choice for demanding applications.

In summary, DCS's CP-484GG, CP-485GD, CP-486GL, CP-366, and CP-364GL reflect the company's commitment to innovation, efficiency, and reliability in control solutions. Each model comes equipped with cutting-edge technologies that enhance performance and adaptability for a range of industries, paving the way for smarter, safer, and more efficient operations.
Top Page Image Contents