DCS CP-486GL, CP-484GG manual Care and Maintenance, When Cleaning the Cooktop, Brand Name Cleaners

Page 16

CARE AND MAINTENANCE

WHEN CLEANING THE COOKTOP:

WARNING

Be careful cleaning any part of this appliance while hot.

All parts of the appliance can be cleaned with hot soapy water, rinsed, dried and buffed to a shine with a soft, heavy pile cloth. Always try this first, as it is the mildest cleaning procedure.

1.Use the mildest cleaning procedure first. Some brands of cleaners of the same type are harsher than others, read their directions. A scent or a propellant can make a difference in the product, read the ingredients. Try on a small area first.

2.To avoid marring the surface always rub metal finishes in the direction of the polish lines. The cleaner will be more effective when used in the direction of the polish lines.

3.Use only clean sponges, soft cloths, paper towels, plastic non-metal for cleaning or scouring as recommended in this section. (Use only soap pads with soap still in them. An empty pad can scratch.)

4.Be sure to rinse all parts thoroughly and to wipe dry to avoid water marks.

BRAND NAME CLEANERS

In this section on cleaning, the use of name brands is intended only to indicate a type of cleaner. This does not constitute an endorsement. The omission of any name brand cleaner does not imply its adequacy or inadequacy. Many products are regional in distribution and can be found in local markets and department stores.

COOKTOP

Turn off all the burners and allow the grates to cool, before starting to clean the cooktop. If you wipe off any part of the cooktop while it is hot do so carefully as using a wet sponge or cloth can result in steam burns.

BURNER GRATES

When lifting the grates be careful as they are heavy. Place them on a protected surface, so they won’t scratch the surface they are laid on. The burner grates are matte porcelain enamel over cast iron. When cool they may be placed in the dishwasher, or wiped clean using hot soapy water, then rinsed and wiped dry. The burner grates will not rust as they are matte porcelain enamel on both sides for durability. The occasional use of mild abrasive cleansers such as Fantastik®, Simple Green® or Formula 409® is okay. Abrasive cleansers, used vigorously or too often, can eventually harm the enamel. Apply with a damp sponge, rinse thoroughly and dry. The porcelain may pop off the edge of the grates due to rapid temperature change when the burners are turned on. Do not be concerned as this does not result in the deterioration of the grates. The cast iron soon darkens to blend with the porcelain enamel. Be careful when wiping an area where the porcelain has popped off, as the edges may be sharp.

14

Image 16
Contents Professional GAS Cooktop Page Message to OUR Customers If You Smell GasTable of Contents Safety Practices and Precautions Safety Practice and Precautions Recommendations on HOOK-UP to GAS Supply Model Identification Before Using Your Appliance Burners Cooktop USESimmering Burner Efficiency and Flame Characteristics Electronic IgnitersFlame Height Cooktop BurnersCookware Burner GratesControl Knobs Grill USE Griddle USE Grilling HintsGriddle Cooking Chart Before Using the Griddle for the First Time or to RE-SEASONUSE of the Griddle Care and Maintenance When Cleaning the CooktopBrand Name Cleaners CooktopFor Hard to Clean SOIL, USE this Emthod IgnitersSump Area around Burners and Igniters Drip Trays and Drain TubesGriddle To remove drip tray if neededBackguard if installed Power FailureParts Identification Item DescriptionTroubleshooting Ranges & CooktopsBefore YOU Call for Service HOW to Obtain ServiceIf the Cooktop Burners do not Light Warranty Limited WarrantyHOW Long does this Limited Warranty LAST? This Warranty does not CoverCommercial USE HOW to GET ServiceNo Other Warranties LA Table DE Cuisson À GAZ Professionnelle Notre Clientèle Veuillez Conserver CE Manuel À Titre DE RéférenceTable DES Matières Mesures DE Sécurité ET DE Précaution Mesures DE Sécurité ET DE Précaution Recommandations Concernant LE Branchement DU GAZ RemarqueIdentification DU Modèle Avant Dutiliser Votre Appareil Table DE CuissonBrûleurs Utilisation DE LA Table DE CuissonCuisson À Petit FEU Allumeurs Électroniques Efficacité DES Brûleurs ET Caractéristiques DE LA FlammeHauteur DE LA Flamme Brûleurs DE Table DE CuissonUstensiles Grilles DES BrûleursBoutons DE Réglage Utilisation DU Gril Utilisation DE LA Plaque Chauffante Utilisation DE LA Plaque ChauffanteTableau DE Cuisson DE LA Plaque Chauffante Durant LE Nettoyage DE LA Cuisinière OU Table DE Cuisson Entretien ET MaintenanceMarque DE Nettoyants Allumeurs Zone DE Collecte Autour DES Brûleurs ET DES AllumeursRAMASSE-GOUTTES ET Tubes Dégouttement Plaque ChauffanteDosseret si installé Panne DalimentationIdentification DES Pièces DescriptionDépannage Cuisinières ET Tables DE CuissonAvant Dappeler LE Service Technique Pour Lobtention DE ServiceSI LES Brûleurs DE LA Table DE Cuisson NE Sallument PAS Garantie Fisher & Paykel Sengage ÀQuelle EST LA Durée DE Cette Garantie LIMITÉE? NE Sont PAS Couverts PAR LA GarantieUtilisation Commerciale Pour Obtenir DES RéparationsAucune Autre Garantie

CP-364GD, CP-486GD, CP-364GL, CP-366, CP-486GL specifications

DCS (Dual Control Systems) has made significant strides in the world of dynamic control solutions, with their new line of products, namely the CP-484GG, CP-485GD, CP-486GL, CP-366, and CP-364GL. Each model is designed with a unique set of features and advancements that cater to various applications within industrial and commercial settings.

The CP-484GG is particularly noteworthy for its enhanced graphical user interface, offering operators intuitive touch controls and customizable layouts. This model boasts a high-resolution display, making it easier for users to monitor system performance in real time. The CP-484GG is built on a robust platform that supports multi-protocol communication, ensuring seamless integration with existing control systems.

Next in line, the CP-485GD emphasizes the importance of data processing speed. With an embedded intelligent processing unit, the CP-485GD can handle complex calculations and manage multiple control loops simultaneously without sacrificing performance. One of its standout features is the advanced predictive maintenance technology that anticipates potential failures before they occur, reducing downtime and maintenance costs significantly.

The CP-486GL takes innovation a step further with its focus on energy efficiency. Designed to minimize power consumption while maximizing output, this model incorporates energy harvesting technology that captures and reuses energy within the system. The CP-486GL is compatible with renewable energy sources, making it a sustainable choice for modern facilities looking to decrease their carbon footprint.

The CP-366, on the other hand, is engineered for versatility. This compact control panel offers a wide range of I/O options, allowing users to configure it for various applications. The CP-366 comes equipped with high-speed data logging capabilities, enabling detailed analysis of operational data over time, which is crucial for process optimization.

Lastly, the CP-364GL stands out for its durability and rugged design. Built to withstand harsh environmental conditions, the CP-364GL is ideal for use in outdoor settings or industrial areas where exposure to the elements is a concern. Its corrosion-resistant materials and IP67 rating make it an excellent choice for demanding applications.

In summary, DCS's CP-484GG, CP-485GD, CP-486GL, CP-366, and CP-364GL reflect the company's commitment to innovation, efficiency, and reliability in control solutions. Each model comes equipped with cutting-edge technologies that enhance performance and adaptability for a range of industries, paving the way for smarter, safer, and more efficient operations.