DCS CP-484GG, CP-485GD, CP-486GL, CP-366, CP-364GL, CP-486GD Recommendations on HOOK-UP to GAS Supply

Page 7

SAFETY PRACTICES AND PRECAUTIONS

■Clean the ventilator hood and filters above the range or cooktop frequently so grease from cooking vapors does not accumulate on them.

■Turn the ventilator OFF in case of fire or when intentionally “flaming” liquor or other spirits on the cooktop. The blower, if in operation, could unsafely spread the flames.

■DO NOT obstruct the flow of combustion or ventilation air to the appliance. Be sure a fresh air supply is available.

■For safety reasons and to avoid damage to the appliance, never sit, stand, or lean on the cooking surface.

■Service should only be done by authorized technicians. Technicians must disconnect the power supply before servicing this appliance.

WARNING!

California Proposition 65 - The burning of gas cooking fuel generates some by-products which are known by the State of California to cause cancer or reproductive harm. California law requires businesses to warn customers of potential exposure to such substances. To minimize exposure to these substances, always operate this unit according to the instructions contained in this booklet and provide good ventilation to the room when cooking with gas.

RECOMMENDATIONS ON HOOK-UP TO GAS SUPPLY:

A manual valve must be installed external to the appliance, in an accessible location from the front for the purpose of shutting off the gas supply. The supply line must not protrude beyond the back of the unit. Make sure the gas supply is turned off at the wall valve before connecting the appliance.

The gas supply connections should be made by a qualified technician and in accordance with local codes or ordinances. In the absence of a local code, the installation must conform to the latest edition of the National Fuel Gas Code ANSI Z223.1.

NOTE:

This product must be installed by a licensed plumber or gas fitter when installed within the Commonwealth of Massachusetts.

NOTE: (mandatory for the State of Massachusetts)

Alternate method of supplying gas must be installed into the unit.

Installer supplied

Gas Supply

shut-off valve

 

must be easily

 

accessible inside

 

cabinetry.

 

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Professional GAS Cooktop Page If You Smell Gas Message to OUR CustomersTable of Contents Safety Practices and Precautions Safety Practice and Precautions Recommendations on HOOK-UP to GAS Supply Model Identification Before Using Your Appliance Burners Cooktop USESimmering Cooktop Burners Burner Efficiency and Flame CharacteristicsElectronic Igniters Flame HeightCookware Burner GratesControl Knobs Grill USE Grilling Hints Griddle USEGriddle Cooking Chart Before Using the Griddle for the First Time or to RE-SEASONUSE of the Griddle Cooktop Care and MaintenanceWhen Cleaning the Cooktop Brand Name CleanersDrip Trays and Drain Tubes For Hard to Clean SOIL, USE this EmthodIgniters Sump Area around Burners and IgnitersTo remove drip tray if needed GriddlePower Failure Backguard if installedItem Description Parts IdentificationRanges & Cooktops TroubleshootingBefore YOU Call for Service HOW to Obtain ServiceIf the Cooktop Burners do not Light This Warranty does not Cover WarrantyLimited Warranty HOW Long does this Limited Warranty LAST?Commercial USE HOW to GET ServiceNo Other Warranties LA Table DE Cuisson À GAZ Professionnelle Veuillez Conserver CE Manuel À Titre DE Référence Notre ClientèleTable DES Matières Mesures DE Sécurité ET DE Précaution Mesures DE Sécurité ET DE Précaution Remarque Recommandations Concernant LE Branchement DU GAZIdentification DU Modèle Table DE Cuisson Avant Dutiliser Votre AppareilBrûleurs Utilisation DE LA Table DE CuissonCuisson À Petit FEU Brûleurs DE Table DE Cuisson Allumeurs ÉlectroniquesEfficacité DES Brûleurs ET Caractéristiques DE LA Flamme Hauteur DE LA FlammeUstensiles Grilles DES BrûleursBoutons DE Réglage Utilisation DU Gril Utilisation DE LA Plaque Chauffante Utilisation DE LA Plaque ChauffanteTableau DE Cuisson DE LA Plaque Chauffante Durant LE Nettoyage DE LA Cuisinière OU Table DE Cuisson Entretien ET MaintenanceMarque DE Nettoyants Zone DE Collecte Autour DES Brûleurs ET DES Allumeurs AllumeursPlaque Chauffante RAMASSE-GOUTTES ET Tubes DégouttementPanne Dalimentation Dosseret si installéDescription Identification DES PiècesCuisinières ET Tables DE Cuisson DépannageAvant Dappeler LE Service Technique Pour Lobtention DE ServiceSI LES Brûleurs DE LA Table DE Cuisson NE Sallument PAS NE Sont PAS Couverts PAR LA Garantie GarantieFisher & Paykel Sengage À Quelle EST LA Durée DE Cette Garantie LIMITÉE?Utilisation Commerciale Pour Obtenir DES RéparationsAucune Autre Garantie

CP-364GD, CP-486GD, CP-364GL, CP-366, CP-486GL specifications

DCS (Dual Control Systems) has made significant strides in the world of dynamic control solutions, with their new line of products, namely the CP-484GG, CP-485GD, CP-486GL, CP-366, and CP-364GL. Each model is designed with a unique set of features and advancements that cater to various applications within industrial and commercial settings.

The CP-484GG is particularly noteworthy for its enhanced graphical user interface, offering operators intuitive touch controls and customizable layouts. This model boasts a high-resolution display, making it easier for users to monitor system performance in real time. The CP-484GG is built on a robust platform that supports multi-protocol communication, ensuring seamless integration with existing control systems.

Next in line, the CP-485GD emphasizes the importance of data processing speed. With an embedded intelligent processing unit, the CP-485GD can handle complex calculations and manage multiple control loops simultaneously without sacrificing performance. One of its standout features is the advanced predictive maintenance technology that anticipates potential failures before they occur, reducing downtime and maintenance costs significantly.

The CP-486GL takes innovation a step further with its focus on energy efficiency. Designed to minimize power consumption while maximizing output, this model incorporates energy harvesting technology that captures and reuses energy within the system. The CP-486GL is compatible with renewable energy sources, making it a sustainable choice for modern facilities looking to decrease their carbon footprint.

The CP-366, on the other hand, is engineered for versatility. This compact control panel offers a wide range of I/O options, allowing users to configure it for various applications. The CP-366 comes equipped with high-speed data logging capabilities, enabling detailed analysis of operational data over time, which is crucial for process optimization.

Lastly, the CP-364GL stands out for its durability and rugged design. Built to withstand harsh environmental conditions, the CP-364GL is ideal for use in outdoor settings or industrial areas where exposure to the elements is a concern. Its corrosion-resistant materials and IP67 rating make it an excellent choice for demanding applications.

In summary, DCS's CP-484GG, CP-485GD, CP-486GL, CP-366, and CP-364GL reflect the company's commitment to innovation, efficiency, and reliability in control solutions. Each model comes equipped with cutting-edge technologies that enhance performance and adaptability for a range of industries, paving the way for smarter, safer, and more efficient operations.
Top Page Image Contents