Bosch Appliances PT-400 manual Abort Button to Remove a Device from the Setup Mode

Security Escort Technical Reference Manual 3.0 System Menus and Screens

EN 50

The illuminated LED’s indicate to the service person standing near the device that the receiver is actually the one currently in the setup mode. If the LED’s of the designated receiver are not illuminated, there is probably an error in the switch settings of the receiver or an error in the address in the Transponder Database. To help resolve such problems, the person at the central console can command any device to illuminate its LED’s and/or sound its horn.

If the receiver in the Setup Mode detects the maintenance alarm and if the received signal is the strongest of all receivers, the horn on the receiver sounds briefly and the LED’s go off. This indicates the receiver is functioning properly and the receiver’s address is set correctly in the Transponder Database and on the receiver’s switches.

Figure 477: Abort Button to Remove a Device from the Setup Mode

The central console also confirms the successful setup with an audible and text message. The abort setup for this MUX Point button disappears and is replaced by Test On This MUX Point Successful button. Click this button to conclude the test on this point (see Figure 48).

Figure 488: Confirmation of

Successful Setup Test

Auto Advance

If this box is checked, the central console automatically selects the receiver with the next higher point address.

Horn - Siren

If this checkbox is checked, the horn output of a receiver or the siren output of an alert unit is turned on if On is clicked, or off if Off is clicked. If this checkbox is not checked, the state of this output does not change.

Green LED

If this checkbox is checked, the green LED output of a receiver or the spare output of an alert unit is turned on if On is clicked, or off if Off is clicked. If this checkbox is not checked, the state of this output does not change.

Bosch Security Systems 6/12 38947D