Bosch Appliances PT-400 manual Alarm Area Setup, Manual Pages

Security Escort Technical Reference Manual 6.0 Security Escor Pager Setup

EN 75

If the pager information is entered, this individual may be assigned to three paging groups. Each group accepts eight members maximum. Remember, it takes time to communicate with a paging service; therefore, only add members to a group if they need to be there. Otherwise, you may slow the paging report to people that must respond.

A pager group may contain members accessed by the local paging system and members that require dial-up access. Dial-up access typically takes much longer and it may slow pages to the local paging system.

6.5Alarm Area Setup

In the Transponder Database under the File Menu, select the transponder with the desired programmed alarm area. Then click Edit data. Click Show areas and select the area desired.

The pager group field may be programmed with a pager group that is paged if this area is the most likely location of an alarm. This pager group is the first group paged to allow quick response by those individuals charged with responding to an alarm in this area. Each area may be assigned a pager group that can be the same or different from other alarm areas.

Figure 755: Transponder Area Edit Screen

The default alarm pager group defined in the Pager Setup Screen is paged after the pager group assigned to an area. If a pager group is not assigned to an area or the alarm location is not within a defined area, only the default pager group is paged.

6.6Manual Pages

Select the Send Pager Message Screen under the Setup Menu to send manual pages.

Type the desired message in the large text box on the top.

∙To send the page to all members of the default service pager group, click Send Service.

∙To send the page to all members of the default security pager group, click Send Security.

∙To send the page to all members of a specific pager group, enter the desired group number in the pager group field and click Send to group.

∙To send the page to an individual, click the down arrow to display a list of the individuals that are programmed in this system. Select the desired individual by clicking on their name with the left mouse button, then click Send to individual.

Figure 766: Send a Pager Text Message Screen

Bosch Security Systems 6/12 38947D