Bosch Appliances PT-400 manual Service and Security Alarm Pager Setup

Security Escort Technical Reference Manual 6.0 Security Escor

Pager Setup

EN 74

6.3Service and Security (Alarm) Pager Setup

Pager access is setup in the Pager Setup Screen under the Setup Menu. Refer to the Pager Setup Screen for the details not covered here.

Figure 733: Pager Setup Screen

For both the service and security pagers, an individual pager (phone number, password, and pager ID) can be assigned. The pager ID is required for all individual pagers, dial-up and local. If the phone number and password are assigned, the page is sent over the modem connection. If the phone number and password fields are both blank, the page is routed to the local paging system. If you do not desire an individual pager, leave the phone number, password, and pager ID fields blank.

Both the service and security pagers also support paging groups. If a group number is programmed in the pager group field, all the members of that group are paged for every service or alarm page.

If service or alarm pages are enabled, either the paging group or individual pager must be filled in. They may both be filled in if desired.

The baud rate assignments in this screen affect only the dial-up paging access through the modem (get the desired baud rate from the paging company). These baud rate selections have no effect on local paging systems or remote system access. Remember that dial-up pages may be routed to different paging companies and they may require different baud rates. Set the baud rate to the highest baud rate common to all of the paging companies to be accessed.

The character limit (characters per page), pages per call affect all pages of the indicated type (local and dial- up). These fields must be set to the lowest setting for any of the routes that may be used. Remember that dial-up pages may be routed to different paging companies and they may have different restrictions.

6.4Subscriber (Individual) Pager Setup

In the Subscriber Database, select the record for the desired individual. Press Edit data then press Advanced. The screen displays.

The pager ID is required for all individual pagers dial-up and local. If the phone number and password are assigned, the page is sent over the modem connection. If the phone number and password fields are blank, the page is routed to the local paging system. If you do not desire this individual to have pager support, leave the phone number, password, and pager ID fields blank.

Figure 744: Subscriber Database

Advanced Screen

Bosch Security Systems 6/12 38947D