Bosch Appliances PT-400 manual Floppy a, Backup, Restore Screen, Clear Entire File

Security Escort Technical Reference Manual 3.0 System Menus and Screens

EN 27

Floppy A

Store the backup files on the floppy disk in floppy disk drive A.

Backup

When the Backup button is clicked, all the databases selected with a checkmark are saved to the destination selected on the right.

3.2.2 Restore Screen

Use this screen to restore previously made database backups to the system databases. On the left, select the database to be restored. The right indicates where this database backup is currently located. Click the Restore button to replace the existing database file with the backup. This process also rebuilds the database and its index tables which corrects most database structure problems.

Figure 23: Restore Screen

Operators

The database of all individuals with passwords to operate the system software and acknowledge alarms.

Subscriber

This database contains all transmitters assigned in the system.

Transponders

This database contains the transponders, receivers, virtual receivers, and alert units configurations.

Reports

This database contains all the alarm reports and related alarm map screens.

Master Database Drive

Store the backup files in the Security Escort Master Database directory. See the System Directories and Network Address Screen.

Slave Database Drive

Store the backup files in the Security Escort Slave Database directory. See the System Directories and Network Address Screen.

Local Database Drive

Store the backup files in the same sub- directory where on this computer the Security Escort System components are stored (typically C:\ESCORT).

Cartridge Disk Drive

Store the backup files in the

Backup/restore to disk cartridge path field assigned in the System Preferences Screen. This path may point to a cartridge disk drive, a local hard disk, or a network disk drive.

Floppy A

Store the backup files on the floppy disk in floppy disk drive A.

Clear Entire File

If the database is selected and the Restore button is clicked, the entire database is cleared of all records.

This selection must be used with extreme caution. Hold down the [SHIFT] and [CTRL] keys when opening the screen to enable the Clear Entire File option.

Restore

When the Restore button is clicked, the database selected is restored from the destination selected on the right.

This message box is a reminder that if changes to the system databases were made since the backup was made, the changes are lost. Therefore those changes must be redone to the restored database.

Figure 24: Restore Warning Message

Bosch Security Systems 6/12 38947D