Security Escort Technical Reference Manual 3.0 System Menus
and Screens
EN 59
LF Only
Appends a line feed character at the end of each string transmitted. Only functions with the system serial ports (ignored on the network and modem ports).
3.3.20 Remote Setup Screen
This screen sets up the remote access and system serial port parameters.
Figure 555: Remote Setup Screen
Default Master Computer
This computer is either the only computer in the system or on startup this computer defaults to the Master computer in a live Security Escort System.
Default Slave Computer
This computer, on startup, defaults to the slave computer in a live Security Escort System.
Workstation Computer
This computer is in a live Security Escort System It can be used for all operator functions. It cannot control the system like the master and slave computers.
Remote Computer
This computer is not in a live Security Escort System. It is used only for remote access. For this setting to be enabled, all transponder Comm ports and the network port must be set to none.
Emergency Answer Only
Allows the master computer to answer a remote access only after ten rings. If the master does not answer, the slave answers after twelve rings.
Master Computer Answers
Allows the master computer to answer a remote access after the programmed number of rings. If the master does not answer, the slave answers after the programmed number of rings plus two.
Slave Computer Answers
Allows the slave computer to answer a remote access after the programmed number of rings. If the slave does not answer, the master answers after the programmed number of rings plus two. Generally, it is better to have the master computer answer remote access calls.
Direct Connect Port
The modem port is not connected to a modem. This setting allows a direct serial connection to another computer. This additional computer does not display alarms, but otherwise behaves like a slave computer.
Answering Machine Override
If checked, an answering machine is connected to this phone line. If the answering machine answers a remote access call, hang up and redial. When another call is received within 1 min. of the last ring of a previous call, the Security Escort System answers on the first ring, overriding the answering machine.
Pulse Dial
If checked, use pulse dial on all outgoing calls; otherwise, tone dialing (default) is used.
Answer On Ring
Program the number of rings on which to answer. If there is an answering machine on this phone line, set the number of rings to at least two greater than the number of rings the answering machine answers. Also check the Answering Machine Override checkbox.
Dialing Prefix
On outgoing calls enter the dialing prefix, if any.
Password
This is the password that is used to gain remote access to the Security Escort System. If the first five characters of the password match the remote systems password, read only access is allowed. If all twelve characters match, you can change system parameters remotely.
Bosch Security Systems 6/12 38947D
