Bosch Appliances PT-400 manual Subscriber Image File Path, Subscriber Image Extension

Security Escort Technical Reference Manual 3.0 System Menus	EN 67
and Screens

Note:

With version 2.04 of the software it is possible to use UNC path names rather than mapping drive letters. Therefore, the path to the master computer’s database is \\SLAVE\C\ESCORT.

Local Escort Path: The path on this workstation the Security Escort was installed in. Typically, it is C:\ESCORT.

Backup/Restore to Disk Cartridge Path

When backing up or restoring the databases to a disk cartridge use this path.

Subscriber Image File Path

The Security Escort System software can display an image for each subscriber on the alarm screen. This parameter tells the software the path to where the image files are stored. The default is C:\ESCORT\IMAGES.

Subscriber Image Extension

The subscriber images can be in JPEG or Windows Bitmap format. All images in a system must be in the same format. For the JPEG format, enter the Windows extension JPG. For the Bitmap format, enter the Windows extension BMP.

Subscriber Image Scaling %

When the display is set to 640 by 480 pixels and subscriber images are being displayed, this parameter controls the image size. This value can range from 10% to 100% and should be adjusted while viewing alarms to get the desired image size. When the display is set to 800 by 600 or larger (recommended), this parameter has no effect.

3.5.2 Network Socket Status Screen

This screen shows diagnostic information for the selected TCP/IP socket.

Figure 677: Current Network Socket Status Screen

Successful Incoming Messages

This value is the number of messages the system successfully received on this socket.

Incoming Communication Errors

This value is the number of messages the system detected errors in, on this socket. If displayed in yellow, this value is more than 1.5% of the Successful Incoming Messages.

Incoming Retried Messages

This value is the number of successful receptions that indicated that the sending application retried. If displayed in yellow, this value is more than 1.5% of the Successful Incoming Messages.

Total Outgoing Messages

This value is the total number of outgoing messages that were sent on this socket.

Outgoing Retried Messages

This value is number of outgoing messages that must be retried because the receiving application did not acknowledge them. If displayed in yellow, this value is more than 1.5% of the Total Outgoing Messages.

Receive Buffer Max

This value is the maximum number of bytes that were received on this serial port, but not yet processed by the system. If displayed in yellow, more than 50% of the queue was in use.

Bosch Security Systems 6/12 38947D