Security Escort Technical Reference Manual 3.0 System Menus and Screens
EN 69
Demo Man Down Alarm, Subscriber 3
For demonstration only, it cannot be used in a live system. Causes the system to display a man down alarm from the subscriber with transmitter ID number three. The man down alarm is delayed by the programmed man down delay (usually 10 seconds).
Demo Man Down Restoral, Subscriber 3
For demonstration only, it cannot be used in a live system. Restores a previous man down alarm from the subscriber with transmitter ID number two, if it has not timed out and is not being displayed.
Demo Test Subscriber 1
For demonstration only, it cannot be used in a live system. Simulates a test from the subscriber with transmitter ID number one.
Demo Test Subscriber 2
For demonstration only, it cannot be used in a live system. Simulates a test from the subscriber with transmitter ID number two.
Demo Test Subscriber 3 with low battery
For demonstration only, it cannot be used in a live system. Simulates a test from the subscriber with transmitter ID number three. This test also reports low battery.
Demo Troubles
For demonstration only, it cannot be used in a live system. Simulate troubles from a transponder. Point troubles are simulated for AC loss, tamper, and no response. Transponder troubles are simulated for remote key and remote key tamper. The individual troubles can be enabled or disabled in the
Demo Trouble Restoral
For demonstration only, it cannot be used in a live system. Simulates trouble restorals for all the troubles sent in Demo Troubles.
Demo Maintenance Alarm
For demonstration only, it cannot be used in a live system. Simulates an alarm from a maintenance transmitter.
Demo Maintenance Test
For demonstration only, it cannot be used in a live system. Simulates a test from a maintenance transmitter.
3.6.1 About Screen
The About Screen presents the version information, copyright data, and internal processing timers.
Figure 711: About Screen
Software Version
At the top of the screen, the software version and the date and time that it was compiled is displayed.
Free Disk Space
This shows the free disk space on the “C” drive of this computer.
Total Disk Space
This shows the total disk space on the “C” drive of this computer.
Tick Time
The amount of time spent in the tick time processor per pass.
Idle Time
The amount of time spent in the Idle Time processor per pass.
Alarm Time
The amount of time spent to process each Alarm Report from a transponder.
