Franklin Industries, L.L.C FIM44 guide

2.Find the drain outlet on the back of ice maker, then take off the rear drainage plug. Connect the nut of the drain outlet to the water draining hose, and insert the other end of the hose into the drain line.

3.Screw off the water drainage nut and pull off the plug on the rear of the ice storage bin. NOTE: Store the drainage nuts and plugs in the compartment labeled Nut/Plug Storage at the back of the unit or in another safe place.

All horizontal runs of drain lines must have a fall of ¼” per foot. An air gap will likely be required between the ice maker drain tube and the drain/waste receptacle. A stand pipe with a trap below it would be acceptable for the drain/waste receptacle. A floor drain is also acceptable. If this is not possible, FRANKLIN recommends the use of a condensate pump. Contact Franklin Chef customer service at 1-888-424-8278.

4.Pour 1 gallon of water into the ice storage bin to check for leaks at all drain connections and at the nut of the drain water hole. Tighten any connections or nuts that leak.

If you don’t connect the drain hose

When you choose not to connect the drain hose, the water drainage nut on the rear of the ice storage bin must be tightened .The drain outlet plug at the back of the ice maker should be tightened also. Water collects in the ice storage bin through ice cube melting. The water level in the ice storage bin can be seen at the water level indicator tube .When required, the water must be discharged through the melt water drainage nut on the front of the ice storage bin. The nut must be tightened afterwards. (Do not loosen or screw off the nut at other times.) See Fig. A below.

IMPORTANT: Infrequent drainage will cause a high rate of melting in the ice storage bin.

IMPORTANT:

∙Drain the melting water regularly or there may be a high rate of melting in the ice storage bin if the water reaches the ice.

∙The unit drains condensation water to the drainage tray on top of the compressor. The water is slowly evaporated by the heat generated by the compressor. If the drainage tray on top of the compressor becomes full of water, this is detected by the water full

FIM44 specifications

Franklin Industries, L.L.C has established itself as a leader in the manufacturing and development of innovative industrial solutions, particularly through its flagship product, FIM44. This state-of-the-art device has garnered attention for its advanced features, cutting-edge technologies, and remarkable characteristics that cater to various industrial applications.

At its core, FIM44 is designed to enhance operational efficiency in the manufacturing sector. One of the main features of FIM44 is its adaptability. It can seamlessly integrate with existing systems, making it a versatile choice for companies looking to upgrade their production lines without overhauling their entire infrastructure. This flexibility is critical in today’s rapidly evolving industrial landscape, where time and cost efficiency are paramount.

Another standout characteristic of FIM44 is its user-friendly interface. With an intuitive touchscreen display, operators can easily navigate through complex functions with minimal training. This ease of use not only improves productivity but also reduces the likelihood of operational errors, making it a safer option for businesses.

When it comes to technology, FIM44 incorporates advanced sensors and automation technologies. These features enable real-time monitoring and data collection, allowing businesses to make informed decisions based on analytics. The predictive maintenance capabilities minimize downtime by alerting operators to potential issues before they escalate, ensuring that production schedules are met without interruption.

Additionally, FIM44 emphasizes sustainability. Its energy-efficient design helps companies reduce their carbon footprint while simultaneously lowering operational costs. By minimizing energy consumption, Franklin Industries is contributing to environmentally responsible manufacturing practices, an increasingly important consideration for businesses today.

Lastly, the durability and robust construction of FIM44 make it suitable for even the most demanding industrial environments. Designed to withstand harsh conditions, it requires minimal maintenance and has a long operational lifespan, offering excellent return on investment.

In summary, Franklin Industries’ FIM44 stands out as a pioneering solution tailored for modern manufacturing needs. Its adaptability, user-friendly interface, advanced technology, emphasis on sustainability, and exceptional durability make it a top choice for industries aiming to enhance their operational capabilities while remaining environmentally conscious.