Franklin Industries, L.L.C FIM44 user manual Water Supply, Drain

Page 13

Water Supply

The water supply should be ready at the point of installation. The water supply pressure should be a minimum of 15 psig with a static pressure not more than 80 psig. (A wall outlet directly behind the ice machine will make installation easier.)

IMPORTANT:

1.All installations must be in accordance with local plumbing code requirements. Professional installation is recommended.

2.Make certain the hoses are not pinched or kinked or damaged during installation.

3.Check for leaks after connection.

Tools required:

½-in. open-end wrench, Phillips screwdriver Connecting the water line:

1.Turn off main water supply. Turn on the nearest faucet long enough to clear line of water.

2.Find a ½-in. to ¾-in. vertical cold water pipe near the installation location. The distance should be less than 9 feet. The water supply hose provided with the ice maker is about 9 feet long.

3.A shut-off valve must be installed to the main water supply. If the water pipe has a plain piece of copper tubing, attach a ¼” O.D. compression union to the tubing and remove the nut.

4.Connect the nut of the water supply hose to the tap, and connect the other end with the water inlet. Tighten firmly by hand, then one-half turn with wrench.

5.Turn on main water supply and tap. Check for water supply connection leaks. Tighten every connection (including connection at the water inlet).

IMPORTANT: When you connect the water supply hose and the drain hose, pay attention to the indications of “Water inlet” and “Drain outlet” on the machine.

Drain

Connecting the drain line or not is optional. When you choose to connect the drain line, you should follow the procedure in “Connecting the drain line “ below. If not, just follow the steps in “If you don’t connect the drain hose”. However, it is recommended to use the drain when the ice maker is at high ambient temperature or low ice consumption to avoid accumulating melt water in the bin.

Connecting the drain line:

NOTE: If there is a drain line near the ice maker, the best choice to drain water to

the drain line through the drain water hose provided with ice maker.

1.Locate the floor drain near the ice maker. The distance should be less than 9 feet since the length of the long drain water hose provided with the ice maker is about 9 feet.

12

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Franklin Industries LLC User’s Manual pages 1 Manual del usuario páginas 27 aTable of Contents Important Safety Instructions ICE Maker SafetyImportant Safeguards Page Ice-making /-harvest rated current Technical InformationComponent Locations IntroductionIce scoop Power Cord Water inlet ICE Maker InstallationUnpacking Drain Outlet Water supply hoseRear of unit Location requirementsSide Electrical requirements Leveling the ice maker Tools needed flathead screwdriver, Phillips screwdriver Reversing the door swingTo replace door on hinges Drain Water SupplyPage Installation Types Operating method Final Check List before OperationHow the machine uses the water Normal sounds How to adjust the capacity of the ice storage binPreparing the ice maker for long storage Exterior cleaning Cleaning and MaintenanceCondenser cleaning Interior cleaningCleaned with a brush or flowing water Ice-making system cleaning Water distribution tube cleaningControl panel Ice machine cleaner contains acidsDescription of LEDs and buttons Major FunctionsBefore Calling for Service TroubleshootingTroubleshooting Guide LineSee Normal Sounds Franklin Industries, LLC Limited WarrantyÍndice Peligro Advertencia Precaución Símbolos DE SeguridadAdvertencias DE Seguridad PeligroConexión eléctrica Conservar Estas InstruccionesModelo Información Técnica7A / 4,8A Ubicación DE Componentes DE LA Máquina IntroducciónDesembalaje Instalación DE LA MáquinaPeligro de peso excesivo Parte de atrás Requisitos del lugar de instalaciónRequisitos de alimentación eléctrica EligroCircuito de descarga a tierra Nivelación de la máquinaVerificar la máquina Cambio del lado de apertura de la puerta Drenaje Conexiones de entrada de aguaSi usted no conecta la manguera de drenaje Importante Tipos de instalaciónMétodo de uso Lista de control final antes de la puesta en servicioEl circuito de agua en la máquina Ciclos de funcionamiento de la máquinaSonidos normales Cómo ajustar la capacidad del recipiente de hieloRecipiente congela continuamente en el evaporador Preparación de la máquina para almacenamiento prolongado PrecauciónLimpieza interna Limpieza externaLimpieza del tubo de distribución de agua Limpieza del condensadorEl producto de limpieza para la máquina contiene ácidos Limpieza del sistema para hacer hieloTablero de control Funciones Principales Antes de llamar al servicio de reparación Problema Posible causa Solución probableGuía de diagnóstico de fallas Normales ProblemaGarantía Limitada Page Page FIM44 OM-ES-3

FIM44 specifications

Franklin Industries, L.L.C has established itself as a leader in the manufacturing and development of innovative industrial solutions, particularly through its flagship product, FIM44. This state-of-the-art device has garnered attention for its advanced features, cutting-edge technologies, and remarkable characteristics that cater to various industrial applications.

At its core, FIM44 is designed to enhance operational efficiency in the manufacturing sector. One of the main features of FIM44 is its adaptability. It can seamlessly integrate with existing systems, making it a versatile choice for companies looking to upgrade their production lines without overhauling their entire infrastructure. This flexibility is critical in today’s rapidly evolving industrial landscape, where time and cost efficiency are paramount.

Another standout characteristic of FIM44 is its user-friendly interface. With an intuitive touchscreen display, operators can easily navigate through complex functions with minimal training. This ease of use not only improves productivity but also reduces the likelihood of operational errors, making it a safer option for businesses.

When it comes to technology, FIM44 incorporates advanced sensors and automation technologies. These features enable real-time monitoring and data collection, allowing businesses to make informed decisions based on analytics. The predictive maintenance capabilities minimize downtime by alerting operators to potential issues before they escalate, ensuring that production schedules are met without interruption.

Additionally, FIM44 emphasizes sustainability. Its energy-efficient design helps companies reduce their carbon footprint while simultaneously lowering operational costs. By minimizing energy consumption, Franklin Industries is contributing to environmentally responsible manufacturing practices, an increasingly important consideration for businesses today.

Lastly, the durability and robust construction of FIM44 make it suitable for even the most demanding industrial environments. Designed to withstand harsh conditions, it requires minimal maintenance and has a long operational lifespan, offering excellent return on investment.

In summary, Franklin Industries’ FIM44 stands out as a pioneering solution tailored for modern manufacturing needs. Its adaptability, user-friendly interface, advanced technology, emphasis on sustainability, and exceptional durability make it a top choice for industries aiming to enhance their operational capabilities while remaining environmentally conscious.
Top Page Image Contents