Franklin Industries, L.L.C FIM44 user manual Cleaning and Maintenance, Exterior cleaning

Page 20

CLEANING AND MAINTENANCE

If the ice maker is left unused for a long time, before the next use it must be thoroughly cleaned. Follow carefully any instructions provided for cleaning or use of sanitizing solutions. Do not leave any solution inside the ice maker after cleaning.

Periodic cleaning and proper maintenance will ensure efficiency, top performance, and long life. The maintenance intervals listed are based on normal conditions. You may want to shorten the intervals if you have pets, or there are other special considerations.

What shouldn’t be done

Never keep anything in the ice storage bin that is not ice: objects like wine and beer bottles are not only unsanitary, but the labels may slip off and plug up the drain.

What parts should be kept clean

There are 5 things to keep clean:

1.The exterior

2.The interior

3.The condenser

4.Water distribution tube

5.The ice-making system

Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is disconnected and the water line is shut off.

Exterior cleaning

The door and cabinet may be cleaned with a mild detergent and warm water solution such as 1 oz. of dishwashing liquid mixed with 2 gallons of warm water. Do not use solvent-based or abrasive cleaners. Use a soft sponge and rinse with clean water. Wipe with a soft clean towel to prevent water spotting.

19

Image 20
Contents User’s Manual pages 1 Manual del usuario páginas 27 a Franklin Industries LLCTable of Contents ICE Maker Safety Important Safety InstructionsImportant Safeguards Page Technical Information Ice-making /-harvest rated currentIntroduction Component LocationsICE Maker Installation Ice scoop Power Cord Water inletUnpacking Drain Outlet Water supply hoseSide Location requirementsRear of unit Electrical requirements Leveling the ice maker To replace door on hinges Reversing the door swingTools needed flathead screwdriver, Phillips screwdriver Water Supply DrainPage Installation Types Final Check List before Operation Operating method How the machine uses the water How to adjust the capacity of the ice storage bin Normal soundsPreparing the ice maker for long storage Cleaning and Maintenance Exterior cleaningCleaned with a brush or flowing water Interior cleaningCondenser cleaning Water distribution tube cleaning Ice-making system cleaningIce machine cleaner contains acids Control panelMajor Functions Description of LEDs and buttonsTroubleshooting Before Calling for ServiceTroubleshooting Guide LineSee Normal Sounds Limited Warranty Franklin Industries, LLCÍndice Símbolos DE Seguridad Peligro Advertencia PrecauciónPeligro Advertencias DE SeguridadConservar Estas Instrucciones Conexión eléctrica7A / 4,8A Información TécnicaModelo Introducción Ubicación DE Componentes DE LA MáquinaPeligro de peso excesivo Instalación DE LA MáquinaDesembalaje Requisitos del lugar de instalación Parte de atrásEligro Requisitos de alimentación eléctricaVerificar la máquina Nivelación de la máquinaCircuito de descarga a tierra Cambio del lado de apertura de la puerta Conexiones de entrada de agua DrenajeSi usted no conecta la manguera de drenaje Tipos de instalación ImportanteLista de control final antes de la puesta en servicio Método de usoCiclos de funcionamiento de la máquina El circuito de agua en la máquinaRecipiente congela continuamente en el evaporador Cómo ajustar la capacidad del recipiente de hieloSonidos normales Precaución Preparación de la máquina para almacenamiento prolongadoLimpieza externa Limpieza internaLimpieza del condensador Limpieza del tubo de distribución de aguaLimpieza del sistema para hacer hielo El producto de limpieza para la máquina contiene ácidosTablero de control Funciones Principales Guía de diagnóstico de fallas Problema Posible causa Solución probableAntes de llamar al servicio de reparación Problema NormalesGarantía Limitada Page Page FIM44 OM-ES-3