Description of LEDs and buttons:
1.Bin Full (Red) LED: Bin full indicator light
When this is lit, the ice storage bin is full of ice or there is some thing blocking the
2.Ice Making(Green) LED: Ice making indicator light
When this is lit, the unit is working in the ice making mode controlled by a temperature probe on the evaporator. When the green LED flashes, the unit is working in the ice making mode controlled by a fixed timer.
3.Ice Harvest (Yellow) LED: Ice harvest indicator light
When this is lit, the unit is working in the ice harvest mode controlled by the
When both the green and yellow LEDs are lit, the unit is in the cold preservation mode.
4.Mode button: Mainly for service. When this is pressed, the ice making mode changes to ice harvest mode or vice versa. The mode can be judged from the status of the green and yellow LEDs.
MAJOR FUNCTIONS
1.The operating procedure is completely automatic.
2.When the ice storage bin is full of ice cubes，the machine stops making ice and proceeds to the cold preservation stage automatically. It starts making ice again after ice cubes are removed.
3.When the drainage tray on top of the compressor is full of water, the machine stops working and alarms at regular intervals. Only when you drain off water by unscrewing the lower drainage nut does the machine resume working.
4.The different colors of the LED display indicate various work modes.
5.The fan motor responds to the ambient temperature. If it is cold, the motor will stop working to keep the cooling system in good working condition.
6.A sensitive probe and accurate timer enhance the performance of the ice maker.
7.A compressor protection system is built in.
23