Franklin Industries, L.L.C FIM44 user manual Preparing the ice maker for long storage

Page 19

Rattling noises may come from the flow of the refrigerant or the water line. Items stored on top of the ice maker can also make noises.

The high efficiency compressor may make a pulsating or high-pitched sound.

Water running may make a splashing sound.

You may hear air being forced over the condenser by the condenser fan.

During the harvest cycle, you may hear the sound of ice cubes falling into the ice storage bin.

Preparing the ice maker for long storage

If the ice maker will not be used for a long time, or is to be moved to another place, it will be necessary to drain the system of water.

1.Shut off the water supply at the main water source.

2.Disconnect the water supply line from the water inlet.

3.Shut off the electric supply at the main electrical power source.

4.Take out the ice storage bin to remove any remaining ice and water. Dry the bin.

5.Pull off the drainage tube of the water trough to drain off all water.

6.Leave the door open to allow for circulation and to prevent mold and mildew.

7.Leave water supply line and power cord disconnected until ready to reuse.

IMPORTANT:

Do not touch the power plug when your hands are wet.

Never unplug the unit by pulling on the cord. Grasp the plug and pull out firmly.

18

Image 19
Contents Franklin Industries LLC User’s Manual pages 1 Manual del usuario páginas 27 aTable of Contents Important Safety Instructions ICE Maker SafetyImportant Safeguards Page Ice-making /-harvest rated current Technical InformationComponent Locations IntroductionDrain Outlet Water supply hose ICE Maker InstallationIce scoop Power Cord Water inlet UnpackingRear of unit Location requirementsSide Electrical requirements Leveling the ice maker Tools needed flathead screwdriver, Phillips screwdriver Reversing the door swingTo replace door on hinges Drain Water SupplyPage Installation Types Operating method Final Check List before OperationHow the machine uses the water Normal sounds How to adjust the capacity of the ice storage binPreparing the ice maker for long storage Exterior cleaning Cleaning and MaintenanceCondenser cleaning Interior cleaningCleaned with a brush or flowing water Ice-making system cleaning Water distribution tube cleaningControl panel Ice machine cleaner contains acidsDescription of LEDs and buttons Major FunctionsLine TroubleshootingBefore Calling for Service Troubleshooting GuideSee Normal Sounds Franklin Industries, LLC Limited WarrantyÍndice Peligro Advertencia Precaución Símbolos DE SeguridadAdvertencias DE Seguridad PeligroConexión eléctrica Conservar Estas InstruccionesModelo Información Técnica7A / 4,8A Ubicación DE Componentes DE LA Máquina IntroducciónDesembalaje Instalación DE LA MáquinaPeligro de peso excesivo Parte de atrás Requisitos del lugar de instalaciónRequisitos de alimentación eléctrica EligroCircuito de descarga a tierra Nivelación de la máquinaVerificar la máquina Cambio del lado de apertura de la puerta Drenaje Conexiones de entrada de aguaSi usted no conecta la manguera de drenaje Importante Tipos de instalaciónMétodo de uso Lista de control final antes de la puesta en servicioEl circuito de agua en la máquina Ciclos de funcionamiento de la máquinaSonidos normales Cómo ajustar la capacidad del recipiente de hieloRecipiente congela continuamente en el evaporador Preparación de la máquina para almacenamiento prolongado PrecauciónLimpieza interna Limpieza externaLimpieza del tubo de distribución de agua Limpieza del condensadorEl producto de limpieza para la máquina contiene ácidos Limpieza del sistema para hacer hieloTablero de control Funciones Principales Antes de llamar al servicio de reparación Problema Posible causa Solución probableGuía de diagnóstico de fallas Normales ProblemaGarantía Limitada Page Page FIM44 OM-ES-3