Franklin Industries, L.L.C fim35 user manual Water Supply, Connecting the water line

Page 13

Water Supply

The water supply should be ready at the point of installation. The water supply pressure should be a minimum of 15 psig with a static pressure not more than 80 psig. (A wall outlet directly behind the ice maker will make installation easier.)

IMPORTANT:

1.All installations must be in accordance with local plumbing code requirements. Professional installation is recommended.

2.Make certain that the hoses are not pinched or kinked or damaged during installation.

3.Check for leaks after connection.

Tools required: ½ in. open-end wrench, Phillips screwdriver

Connecting the water line:

1.Turn off main water supply. Turn on nearest faucet long enough to clear line of water.

2.Find a ½ in. to ¾ in. vertical cold water pipe near the installation location. The distance should be less than 9 feet. The water supply hose provided with the ice maker is about 9 feet long.

3.A shut-off valve must be installed to the main water supply. If the water pipe has a plain piece of copper tubing, attach a ¼” O.D. compression union to the tubing and remove the nut.

4.Connect nuts of the water supply hose to tap and water inlet valve. Tighten firmly by hand, then one-half turn with wrench.

5.Turn on main water supply and tap. Check for water supply connection leaks. Tighten every connection (including connections at the water inlet).

This type of ice maker does not require a drain line. The ice storage bin collects water through ice cube melting. The water level of the ice storage bin can be seen through the water level indicator tube. When required, the melt water must be discharged through the melt water drainage nut on the front of the ice storage bin. The nut must be tightened afterwards. (Do not loosen or screw off this nut at other times.) See Fig. A below.

 

 

Water full probe

Fig. A

 

 

 

 

 

 

Fig. B

Water level

 

 

Compressor

 

 

 

Water level indicator tube

Melt water

Drainage

Lower drainage nut

drainage nut

tray

 

 

12

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Franklin Industries, LLC Table of Contents ICE Maker Safety Important Safeguards Page Electrical Connection Technical InformationExtension Cord ModelComponent Locations IntroductionUnpacking Ice Maker InstallationRemove packaging materials Location Requirements Cleaning before useElectrical Shock Hazard Electrical RequirementsRecommended grounding method Leveling the Ice MakerTo remove door from hinges Reversing the Door SwingTo replace door on hinges Water Supply Connecting the water lineMobile Installation Installation TypesBuilt-in Installation Enclosed InstallationFinal Check List before Operation OperationOperating Method How the Machine Makes Ice How the machine uses water How to adjust the capacity of the ice storage binPreparing the Ice Maker for Long Storage Normal SoundsExterior Cleaning Cleaning and MaintenanceWhat should be kept clean What shouldn’t be doneCondenser Cleaning Interior CleaningIce-Making System Cleaning Water Distribution Tube CleaningPage Descriptions of LEDs and buttons Control Panel rear of unitMajor Functions Problem Possible Cause Probable Correction Before Calling for ServiceCheck if the water supply pressure is Franklin Industries, LLC Limited WarrantyPágina ÍndiceSímbolos DE Seguridad Advertencias DE Seguridad Page Cordón prolongador Conexión eléctricaInformación técnica Ubicación de componentes de la máquina IntroducciónDesembalaje Instalación de la máquinaQuitar los materiales de embalaje Limpieza antes de poner en servicio la máquina Requisitos del lugar de instalaciónPeligro de electrocución Requisitos de alimentación eléctricaCircuito de descarga a tierra Nivelación de la máquinaPara quitar la puerta de las bisagras Cambio del lado de apertura de la puertaPara reemplazar la puerta en las bisagras Conexión de la línea de agua Conexiones de entrada de aguaInstalación libre Tipos de instalaciónInstalación empotrada Instalación en cerramientoLista de control final antes de la puesta en servicio Uso de la máquinaImportante Método de usoEl circuito de agua en la máquina Ciclos de funcionamiento de la máquinaPreparación de la máquina para almacenamiento prolongado Sonidos normalesCómo ajustar la capacidad del recipiente de hielo Lo que no se debe hacer Limpieza y mantenimientoHay 5 cosas que se deben mantener siempre limpias Limpieza interna Limpieza externaLimpieza del tubo de distribución de agua Limpieza del condensadorLimpieza del sistema para hacer hielo Tablero de control detrás de la unidad Descripción de luces LED y botonesFunciones principales Diagnóstico de fallas Problema Posible causa Solución probableAntes de llamar al servicio de reparación Problema Posible causa Solución probable Franklin Industries, LLC Garantía limitadaTable des matières Sauvegarder ces instructions Sécurité de l’appareilPrécautions Importantes Sauvegarder CES Instructions Branchement électrique Informations techniquesCâble de rallonge ModèlePositions des composants Déballage Installation de l’appareilEnlever les matériaux d’emballage Nettoyage avant l’emploi Spécifications pour l’emplacementRisque d’électrocution Spécifications électriquesMise à niveau de l’appareil pour la fabrication des glaçons Méthode de mise à la terre recommandéePour enlever la porte des gonds Pour inverser l’ouverture de la portePour remplacer la porte sur les gonds Branchement de l’alimentation d’eau Branchement de l’alimentation d’eauInstallation mobile Types d’installationInstallation incorporée Installation enferméeMode opératoire Check-list finale avant la mise en serviceFonctionnement Stade de fabrication Utilisation de l’eau dans la machine Procédé de fabrication de la glaceBruits qui indiquent un fonctionnement normal Ce qu’il ne faudrait pas faire Entretien et NettoyageCe qui doit être gardé propre Nettoyage intérieur Nettoyage extérieurNettoyage du condenseur Nettoyage du système de fabrication de la glace Nettoyage du tube pour la distribution d’eauPage Tableau de contrôle à l’arriére de la unité Instructions pour les diodes LED et les boutonsFonctions principales Avant d’appeler le service d’entretien Solution des problèmesGuide à la solution des problèmes Problème Cause possible Remède probableProblème Cause possible Remède probable Garantie limitée FIM35-OM-ESF-2 Patent Pending

fim35 specifications

Franklin Industries, L.L.C., known for its innovative approaches in the manufacturing sector, has established itself as a leader in providing high-quality industrial solutions. The company focuses on delivering products that cater to a diverse range of industries, including construction, automotive, and energy, making it a versatile player in the market.

One of the main features of Franklin Industries is its commitment to using advanced technologies in its manufacturing processes. The company employs state-of-the-art machinery and automation systems that enhance production efficiency and accuracy. This technology integration allows Franklin Industries to maintain consistent quality while meeting the growing demands of various sectors.

In addition to manufacturing capabilities, Franklin Industries prioritizes research and development. The company invests significantly in R&D to create innovative products that incorporate the latest advancements in material science and engineering. This dedication to innovation has led to the development of unique product lines featuring eco-friendly materials, thus supporting sustainable practices within the industry.

Franklin Industries also prides itself on its comprehensive quality control standards. Each product undergoes rigorous testing and inspection to ensure it meets the highest benchmarks for safety and performance. This meticulous attention to quality has helped the company build a strong reputation for reliability and durability among its customers.

Another characteristic of Franklin Industries is its customer-centric approach. The company emphasizes building long-term relationships with clients by understanding their needs and providing tailored solutions. This adaptability has allowed Franklin Industries to stand out in an increasingly competitive market, as customers appreciate the flexibility and responsive service the company offers.

Furthermore, Franklin Industries has adopted a proactive stance towards workforce development. The company ensures its employees receive ongoing training and education, keeping them up to date with the latest industry trends and technological advancements. This investment in human capital is crucial for fostering a culture of innovation and excellence within the organization.

In summary, Franklin Industries, L.L.C. exemplifies a forward-thinking manufacturer that combines advanced technology, research-driven innovation, stringent quality control, customer-focused solutions, and a commitment to workforce development. These features and characteristics underscore its position as a leading player in the industrial sector, continually striving to meet the evolving needs of its diverse clientele.
Top Page Image Contents