Franklin Industries, L.L.C fim35 user manual Important Safeguards

Page 4

IMPORTANT SAFEGUARDS

Before the ice maker is used, it must be properly positioned and installed as described in this manual, so read the manual carefully. Franklin Industries strongly recommends that you have a professional install your new machine. The warranty may be affected or voided by an incorrect installation. To reduce the risk of fire, electrical shock or injury when using the ice maker, follow basic precautions, including the following:

•Plug into a grounded 3-prong outlet; do not remove grounding prong, do not use an adapter, and do not use an extension cord.

•It is recommended that a separate circuit, serving only your ice maker, be provided. Use receptacles that cannot be turned off by a switch or pull chain.

•Do not connect or disconnect the electric plug when your hands are wet.

•Never unplug the ice maker by pulling on the power cord. Always grip the plug firmly and pull straight out from the outlet.

•Never clean ice maker parts with flammable fluids. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.

•Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is disconnected and the water line is shut off. (EXCEPTION: When cleaning the machine’s ice making and water systems, see pages 20 - 21)

•Before operating, put all panels back into place.

•Never allow children to operate, play with or crawl inside the ice maker.

•Do not touch the evaporator with your hand when the machine is operating.

•Unplug the ice maker or disconnect power before cleaning or servicing. Failure to do so can result in electrical shock or death.

•Do not attempt to repair or replace any part of your ice maker unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.

•Use two or more people to move and install ice maker. Failure to do so can result in back or other injury.

•To ensure proper ventilation for your ice maker, the front of the unit must be completely unobstructed. Choose a well-ventilated area with temperatures above

3

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Franklin Industries, LLC Table of Contents ICE Maker Safety Important Safeguards Page Technical Information Electrical ConnectionExtension Cord ModelIntroduction Component LocationsUnpacking Ice Maker InstallationRemove packaging materials Cleaning before use Location RequirementsElectrical Requirements Electrical Shock HazardLeveling the Ice Maker Recommended grounding methodTo remove door from hinges Reversing the Door SwingTo replace door on hinges Connecting the water line Water SupplyInstallation Types Mobile InstallationEnclosed Installation Built-in InstallationFinal Check List before Operation OperationOperating Method How the Machine Makes Ice How to adjust the capacity of the ice storage bin How the machine uses waterNormal Sounds Preparing the Ice Maker for Long StorageCleaning and Maintenance Exterior CleaningWhat should be kept clean What shouldn’t be doneInterior Cleaning Condenser CleaningWater Distribution Tube Cleaning Ice-Making System CleaningPage Control Panel rear of unit Descriptions of LEDs and buttonsMajor Functions Before Calling for Service Problem Possible Cause Probable CorrectionCheck if the water supply pressure is Limited Warranty Franklin Industries, LLCÍndice PáginaSímbolos DE Seguridad Advertencias DE Seguridad Page Conexión eléctrica Cordón prolongadorInformación técnica Introducción Ubicación de componentes de la máquinaDesembalaje Instalación de la máquinaQuitar los materiales de embalaje Requisitos del lugar de instalación Limpieza antes de poner en servicio la máquinaRequisitos de alimentación eléctrica Peligro de electrocuciónNivelación de la máquina Circuito de descarga a tierraPara quitar la puerta de las bisagras Cambio del lado de apertura de la puertaPara reemplazar la puerta en las bisagras Conexiones de entrada de agua Conexión de la línea de aguaTipos de instalación Instalación libreInstalación en cerramiento Instalación empotradaUso de la máquina Lista de control final antes de la puesta en servicioMétodo de uso ImportanteCiclos de funcionamiento de la máquina El circuito de agua en la máquinaPreparación de la máquina para almacenamiento prolongado Sonidos normalesCómo ajustar la capacidad del recipiente de hielo Lo que no se debe hacer Limpieza y mantenimientoHay 5 cosas que se deben mantener siempre limpias Limpieza externa Limpieza internaLimpieza del condensador Limpieza del tubo de distribución de aguaLimpieza del sistema para hacer hielo Descripción de luces LED y botones Tablero de control detrás de la unidadFunciones principales Diagnóstico de fallas Problema Posible causa Solución probableAntes de llamar al servicio de reparación Problema Posible causa Solución probable Garantía limitada Franklin Industries, LLCTable des matières Sécurité de l’appareil Sauvegarder ces instructionsPrécautions Importantes Sauvegarder CES Instructions Informations techniques Branchement électriqueCâble de rallonge ModèlePositions des composants Déballage Installation de l’appareilEnlever les matériaux d’emballage Spécifications pour l’emplacement Nettoyage avant l’emploiSpécifications électriques Risque d’électrocutionMéthode de mise à la terre recommandée Mise à niveau de l’appareil pour la fabrication des glaçonsPour enlever la porte des gonds Pour inverser l’ouverture de la portePour remplacer la porte sur les gonds Branchement de l’alimentation d’eau Branchement de l’alimentation d’eauTypes d’installation Installation mobileInstallation enfermée Installation incorporéeMode opératoire Check-list finale avant la mise en serviceFonctionnement Stade de fabrication Procédé de fabrication de la glace Utilisation de l’eau dans la machineBruits qui indiquent un fonctionnement normal Ce qu’il ne faudrait pas faire Entretien et NettoyageCe qui doit être gardé propre Nettoyage intérieur Nettoyage extérieurNettoyage du condenseur Nettoyage du tube pour la distribution d’eau Nettoyage du système de fabrication de la glacePage Instructions pour les diodes LED et les boutons Tableau de contrôle à l’arriére de la unitéFonctions principales Solution des problèmes Avant d’appeler le service d’entretienGuide à la solution des problèmes Problème Cause possible Remède probableProblème Cause possible Remède probable Garantie limitée FIM35-OM-ESF-2 Patent Pending

fim35 specifications

Franklin Industries, L.L.C., known for its innovative approaches in the manufacturing sector, has established itself as a leader in providing high-quality industrial solutions. The company focuses on delivering products that cater to a diverse range of industries, including construction, automotive, and energy, making it a versatile player in the market.

One of the main features of Franklin Industries is its commitment to using advanced technologies in its manufacturing processes. The company employs state-of-the-art machinery and automation systems that enhance production efficiency and accuracy. This technology integration allows Franklin Industries to maintain consistent quality while meeting the growing demands of various sectors.

In addition to manufacturing capabilities, Franklin Industries prioritizes research and development. The company invests significantly in R&D to create innovative products that incorporate the latest advancements in material science and engineering. This dedication to innovation has led to the development of unique product lines featuring eco-friendly materials, thus supporting sustainable practices within the industry.

Franklin Industries also prides itself on its comprehensive quality control standards. Each product undergoes rigorous testing and inspection to ensure it meets the highest benchmarks for safety and performance. This meticulous attention to quality has helped the company build a strong reputation for reliability and durability among its customers.

Another characteristic of Franklin Industries is its customer-centric approach. The company emphasizes building long-term relationships with clients by understanding their needs and providing tailored solutions. This adaptability has allowed Franklin Industries to stand out in an increasingly competitive market, as customers appreciate the flexibility and responsive service the company offers.

Furthermore, Franklin Industries has adopted a proactive stance towards workforce development. The company ensures its employees receive ongoing training and education, keeping them up to date with the latest industry trends and technological advancements. This investment in human capital is crucial for fostering a culture of innovation and excellence within the organization.

In summary, Franklin Industries, L.L.C. exemplifies a forward-thinking manufacturer that combines advanced technology, research-driven innovation, stringent quality control, customer-focused solutions, and a commitment to workforce development. These features and characteristics underscore its position as a leading player in the industrial sector, continually striving to meet the evolving needs of its diverse clientele.
Top Page Image Contents