Franklin Industries, L.L.C fim35 user manual

Page 5

50ºF (10ºC) and below 100ºF (38ºC). This unit MUST be installed in an area protected from the elements, such as wind, rain, water spray or drips.

•The ice maker should not be located next to ovens, grills or other sources of high heat.

•The ice maker must be installed with all electrical and water connections in accordance with state and local codes. A standard electrical supply (115 VAC only, 60 Hz, 15 A), properly grounded in accordance with the National Electrical Code and local codes and ordinances is required.

•Do not kink or pinch the power supply cord or drain lines between the ice maker and the cabinet.

•The fuse (or circuit breaker) size should be 15 amperes.

•It is important for the ice maker to be leveled in order to work properly. You may need to make several adjustments to level it.

•All installations must be in accordance with local plumbing code requirements.

•Make certain that the hoses are not pinched or kinked or damaged during installation.

•Check for leaks after connection.

•Although the unit has been tested at the factory, due to long-term transit and storage, the first batch of cubes must be discarded.

•Remove the packing materials and clean the ice maker before using.

•Turn on the water supply tap before switching on the ice maker. Never turn the water supply tap off when the ice maker is working.

•Except to take ice from the unit, keep the door closed in order to reduce ice melting and to promote proper ice formation.

•If the ice maker will not be used for a long time, before the next use it must be thoroughly cleaned. Follow carefully any instructions provided for cleaning or use of sanitizing solution. Do not leave any solution inside the ice maker after cleaning.

•DO NOT touch the condenser fins. The condenser fins are sharp and can be easily damaged.

•DO NOT use solvent-based cleaning agents or abrasives on the interior. These cleaners may transmit taste to the ice cubes, or damage or discolor the interior.

•The ice machine cleaner contains acids. DO NOT use or mix with any other solvent-based cleaner products. Use rubber gloves to protect hands. Carefully read the material safety instructions on the container of the ice machine cleaner.

•Do not use this apparatus for other than its intended purpose.

SAVE THESE INSTRUCTIONS

4

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Franklin Industries, LLC Table of Contents ICE Maker Safety Important Safeguards Page Electrical Connection Technical InformationExtension Cord ModelComponent Locations IntroductionRemove packaging materials Ice Maker InstallationUnpacking Location Requirements Cleaning before useElectrical Shock Hazard Electrical RequirementsRecommended grounding method Leveling the Ice MakerTo replace door on hinges Reversing the Door SwingTo remove door from hinges Water Supply Connecting the water lineMobile Installation Installation TypesBuilt-in Installation Enclosed InstallationOperating Method OperationFinal Check List before Operation How the Machine Makes Ice How the machine uses water How to adjust the capacity of the ice storage binPreparing the Ice Maker for Long Storage Normal SoundsExterior Cleaning Cleaning and MaintenanceWhat should be kept clean What shouldn’t be doneCondenser Cleaning Interior CleaningIce-Making System Cleaning Water Distribution Tube CleaningPage Descriptions of LEDs and buttons Control Panel rear of unitMajor Functions Problem Possible Cause Probable Correction Before Calling for ServiceCheck if the water supply pressure is Franklin Industries, LLC Limited WarrantyPágina ÍndiceSímbolos DE Seguridad Advertencias DE Seguridad Page Cordón prolongador Conexión eléctricaInformación técnica Ubicación de componentes de la máquina IntroducciónQuitar los materiales de embalaje Instalación de la máquinaDesembalaje Limpieza antes de poner en servicio la máquina Requisitos del lugar de instalaciónPeligro de electrocución Requisitos de alimentación eléctricaCircuito de descarga a tierra Nivelación de la máquinaPara reemplazar la puerta en las bisagras Cambio del lado de apertura de la puertaPara quitar la puerta de las bisagras Conexión de la línea de agua Conexiones de entrada de aguaInstalación libre Tipos de instalaciónInstalación empotrada Instalación en cerramientoLista de control final antes de la puesta en servicio Uso de la máquinaImportante Método de usoEl circuito de agua en la máquina Ciclos de funcionamiento de la máquinaCómo ajustar la capacidad del recipiente de hielo Sonidos normalesPreparación de la máquina para almacenamiento prolongado Hay 5 cosas que se deben mantener siempre limpias Limpieza y mantenimientoLo que no se debe hacer Limpieza interna Limpieza externaLimpieza del tubo de distribución de agua Limpieza del condensadorLimpieza del sistema para hacer hielo Tablero de control detrás de la unidad Descripción de luces LED y botonesFunciones principales Antes de llamar al servicio de reparación Problema Posible causa Solución probableDiagnóstico de fallas Problema Posible causa Solución probable Franklin Industries, LLC Garantía limitadaTable des matières Sauvegarder ces instructions Sécurité de l’appareilPrécautions Importantes Sauvegarder CES Instructions Branchement électrique Informations techniquesCâble de rallonge ModèlePositions des composants Enlever les matériaux d’emballage Installation de l’appareilDéballage Nettoyage avant l’emploi Spécifications pour l’emplacementRisque d’électrocution Spécifications électriquesMise à niveau de l’appareil pour la fabrication des glaçons Méthode de mise à la terre recommandéePour remplacer la porte sur les gonds Pour inverser l’ouverture de la portePour enlever la porte des gonds Branchement de l’alimentation d’eau Branchement de l’alimentation d’eauInstallation mobile Types d’installationInstallation incorporée Installation enferméeFonctionnement Check-list finale avant la mise en serviceMode opératoire Stade de fabrication Utilisation de l’eau dans la machine Procédé de fabrication de la glaceBruits qui indiquent un fonctionnement normal Ce qui doit être gardé propre Entretien et NettoyageCe qu’il ne faudrait pas faire Nettoyage du condenseur Nettoyage extérieurNettoyage intérieur Nettoyage du système de fabrication de la glace Nettoyage du tube pour la distribution d’eauPage Tableau de contrôle à l’arriére de la unité Instructions pour les diodes LED et les boutonsFonctions principales Avant d’appeler le service d’entretien Solution des problèmesGuide à la solution des problèmes Problème Cause possible Remède probableProblème Cause possible Remède probable Garantie limitée FIM35-OM-ESF-2 Patent Pending

fim35 specifications

Franklin Industries, L.L.C., known for its innovative approaches in the manufacturing sector, has established itself as a leader in providing high-quality industrial solutions. The company focuses on delivering products that cater to a diverse range of industries, including construction, automotive, and energy, making it a versatile player in the market.

One of the main features of Franklin Industries is its commitment to using advanced technologies in its manufacturing processes. The company employs state-of-the-art machinery and automation systems that enhance production efficiency and accuracy. This technology integration allows Franklin Industries to maintain consistent quality while meeting the growing demands of various sectors.

In addition to manufacturing capabilities, Franklin Industries prioritizes research and development. The company invests significantly in R&D to create innovative products that incorporate the latest advancements in material science and engineering. This dedication to innovation has led to the development of unique product lines featuring eco-friendly materials, thus supporting sustainable practices within the industry.

Franklin Industries also prides itself on its comprehensive quality control standards. Each product undergoes rigorous testing and inspection to ensure it meets the highest benchmarks for safety and performance. This meticulous attention to quality has helped the company build a strong reputation for reliability and durability among its customers.

Another characteristic of Franklin Industries is its customer-centric approach. The company emphasizes building long-term relationships with clients by understanding their needs and providing tailored solutions. This adaptability has allowed Franklin Industries to stand out in an increasingly competitive market, as customers appreciate the flexibility and responsive service the company offers.

Furthermore, Franklin Industries has adopted a proactive stance towards workforce development. The company ensures its employees receive ongoing training and education, keeping them up to date with the latest industry trends and technological advancements. This investment in human capital is crucial for fostering a culture of innovation and excellence within the organization.

In summary, Franklin Industries, L.L.C. exemplifies a forward-thinking manufacturer that combines advanced technology, research-driven innovation, stringent quality control, customer-focused solutions, and a commitment to workforce development. These features and characteristics underscore its position as a leading player in the industrial sector, continually striving to meet the evolving needs of its diverse clientele.
Top Page Image Contents