Franklin Industries, L.L.C fim35 Final Check List before Operation, Operating Method

Page 16

Operation

Final Check List before Operation

1.Have all packing materials and tape been removed from the interior and exterior of the ice maker?

2.Did you clean the ice storage bin?

3.Have the installation instructions been followed, including connecting the machine to water and electricity?

4.Has the machine been leveled?

5.Is the ice maker in a site where the ambient temperature is between 10º C (50º F) and 38ºC (100ºF) and the water temperature between 5º C (41º F) and 32º C (90º F) all year round?

6.Has the water supply pressure been checked to ensure a minimum of 15 psig with a static pressure not to exceed 80 psig?

7.Is there a clearance of at least 2/5” (10 mm) at the rear, 1” (25 mm) at the top and 1/5” (5 mm) at the sides for proper air circulation?

8.Has the power supply voltage been checked or tested against the nameplate rating? And has proper grounding been installed for the ice maker?

9.Is the ice maker plugged in?

10.Have you turned on the main water supply and the tap?

11.Have you checked for leaks at all water supply connections?

Operating Method

1.Turn on the water tap, let the water trough fill, then switch the ICE/OFF/WASH switch on the front panel to the ICE position. The ice maker will start working automatically.

Ice making stage

Ice harvest stage

Ice full stage

14

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Franklin Industries, LLC Table of Contents ICE Maker Safety Important Safeguards Page Technical Information Electrical ConnectionExtension Cord ModelIntroduction Component LocationsUnpacking Ice Maker InstallationRemove packaging materials Cleaning before use Location RequirementsElectrical Requirements Electrical Shock HazardLeveling the Ice Maker Recommended grounding methodTo remove door from hinges Reversing the Door SwingTo replace door on hinges Connecting the water line Water SupplyInstallation Types Mobile InstallationEnclosed Installation Built-in InstallationFinal Check List before Operation OperationOperating Method How the Machine Makes Ice How to adjust the capacity of the ice storage bin How the machine uses waterNormal Sounds Preparing the Ice Maker for Long StorageCleaning and Maintenance Exterior CleaningWhat should be kept clean What shouldn’t be doneInterior Cleaning Condenser CleaningWater Distribution Tube Cleaning Ice-Making System CleaningPage Control Panel rear of unit Descriptions of LEDs and buttonsMajor Functions Before Calling for Service Problem Possible Cause Probable CorrectionCheck if the water supply pressure is Limited Warranty Franklin Industries, LLCÍndice PáginaSímbolos DE Seguridad Advertencias DE Seguridad Page Conexión eléctrica Cordón prolongadorInformación técnica Introducción Ubicación de componentes de la máquinaDesembalaje Instalación de la máquinaQuitar los materiales de embalaje Requisitos del lugar de instalación Limpieza antes de poner en servicio la máquinaRequisitos de alimentación eléctrica Peligro de electrocuciónNivelación de la máquina Circuito de descarga a tierraPara quitar la puerta de las bisagras Cambio del lado de apertura de la puertaPara reemplazar la puerta en las bisagras Conexiones de entrada de agua Conexión de la línea de aguaTipos de instalación Instalación libreInstalación en cerramiento Instalación empotradaUso de la máquina Lista de control final antes de la puesta en servicioMétodo de uso ImportanteCiclos de funcionamiento de la máquina El circuito de agua en la máquinaPreparación de la máquina para almacenamiento prolongado Sonidos normalesCómo ajustar la capacidad del recipiente de hielo Lo que no se debe hacer Limpieza y mantenimientoHay 5 cosas que se deben mantener siempre limpias Limpieza externa Limpieza internaLimpieza del condensador Limpieza del tubo de distribución de aguaLimpieza del sistema para hacer hielo Descripción de luces LED y botones Tablero de control detrás de la unidadFunciones principales Diagnóstico de fallas Problema Posible causa Solución probableAntes de llamar al servicio de reparación Problema Posible causa Solución probable Garantía limitada Franklin Industries, LLCTable des matières Sécurité de l’appareil Sauvegarder ces instructionsPrécautions Importantes Sauvegarder CES Instructions Informations techniques Branchement électriqueCâble de rallonge ModèlePositions des composants Déballage Installation de l’appareilEnlever les matériaux d’emballage Spécifications pour l’emplacement Nettoyage avant l’emploiSpécifications électriques Risque d’électrocutionMéthode de mise à la terre recommandée Mise à niveau de l’appareil pour la fabrication des glaçonsPour enlever la porte des gonds Pour inverser l’ouverture de la portePour remplacer la porte sur les gonds Branchement de l’alimentation d’eau Branchement de l’alimentation d’eauTypes d’installation Installation mobileInstallation enfermée Installation incorporéeMode opératoire Check-list finale avant la mise en serviceFonctionnement Stade de fabrication Procédé de fabrication de la glace Utilisation de l’eau dans la machineBruits qui indiquent un fonctionnement normal Ce qu’il ne faudrait pas faire Entretien et NettoyageCe qui doit être gardé propre Nettoyage intérieur Nettoyage extérieurNettoyage du condenseur Nettoyage du tube pour la distribution d’eau Nettoyage du système de fabrication de la glacePage Instructions pour les diodes LED et les boutons Tableau de contrôle à l’arriére de la unitéFonctions principales Solution des problèmes Avant d’appeler le service d’entretienGuide à la solution des problèmes Problème Cause possible Remède probableProblème Cause possible Remède probable Garantie limitée FIM35-OM-ESF-2 Patent Pending

fim35 specifications

Franklin Industries, L.L.C., known for its innovative approaches in the manufacturing sector, has established itself as a leader in providing high-quality industrial solutions. The company focuses on delivering products that cater to a diverse range of industries, including construction, automotive, and energy, making it a versatile player in the market.

One of the main features of Franklin Industries is its commitment to using advanced technologies in its manufacturing processes. The company employs state-of-the-art machinery and automation systems that enhance production efficiency and accuracy. This technology integration allows Franklin Industries to maintain consistent quality while meeting the growing demands of various sectors.

In addition to manufacturing capabilities, Franklin Industries prioritizes research and development. The company invests significantly in R&D to create innovative products that incorporate the latest advancements in material science and engineering. This dedication to innovation has led to the development of unique product lines featuring eco-friendly materials, thus supporting sustainable practices within the industry.

Franklin Industries also prides itself on its comprehensive quality control standards. Each product undergoes rigorous testing and inspection to ensure it meets the highest benchmarks for safety and performance. This meticulous attention to quality has helped the company build a strong reputation for reliability and durability among its customers.

Another characteristic of Franklin Industries is its customer-centric approach. The company emphasizes building long-term relationships with clients by understanding their needs and providing tailored solutions. This adaptability has allowed Franklin Industries to stand out in an increasingly competitive market, as customers appreciate the flexibility and responsive service the company offers.

Furthermore, Franklin Industries has adopted a proactive stance towards workforce development. The company ensures its employees receive ongoing training and education, keeping them up to date with the latest industry trends and technological advancements. This investment in human capital is crucial for fostering a culture of innovation and excellence within the organization.

In summary, Franklin Industries, L.L.C. exemplifies a forward-thinking manufacturer that combines advanced technology, research-driven innovation, stringent quality control, customer-focused solutions, and a commitment to workforce development. These features and characteristics underscore its position as a leading player in the industrial sector, continually striving to meet the evolving needs of its diverse clientele.
Top Page Image Contents