Whirlpool WRS950SIAE installation instructions Door Removal, Leveling and Alignment, Tools Needed

Door Removal, Leveling and Alignment

Gather the required tools and parts and read all instructions before starting installation. Save these instructions for future reference.

NOTE: Before moving your product into your home, measure the doorway of your home to see whether you need to remove the refrigerator and freezer doors. If door removal is necessary, see the instructions below.

IMPORTANT: Before you begin, turn the refrigerator control OFF or turn cooling off. Unplug refrigerator or disconnect power. Remove food, the ice storage bin (on some models), and any adjustable door or utility bins from doors.

TOOLS NEEDED:

Bubble level, Phillips screwdriver, ³⁄₁₆" hex key, ¹⁄₄" hex-head socket wrench, ¹⁄₄" and ⁵⁄₁₆" open-ended wrenches or adjustable wrench, internal star drive or ³⁄₈" hex-head socket wrench

WARNING

Electrical Shock Hazard

Disconnect power before removing doors.

Failure to do so can result in death or electrical shock.

4	Top Left Hinge			5	Door Removal		6		Top Right Hinge
				A				A
	A									A
A. Do Not Remove Screws.							A. Do Not Remove Screws.
3	Wiring Connection						7	Bottom Hinges
								(Left and Right)
A	B	C D	E	F
	A. P-clamp						8		Leveling
	B. Routing Plate
	C. Electrical Housing									A
	D. Wiring Clip
	E. Grommets									B
	F. Wiring Plugs
2	Water Dispenser							Raise		Lower
	Tubing Connection								C
									A. Bottom Hinge
									B. Leveler Bracket
									C. Leveling Foot
							9	Door Alignment
								(Bottom Right Hinge)
		A			1	Base Grille
								A	Raise
		A				Doors must be			Lower
	A. Face of Fitting							A. Alignment Screw
						open to 90˚
4