AKG Acoustics MERLIN 232 manual Setting Up

Page 11

MERLIN 232

Flickering green: The batteries are nearly dead.

Dark: a) The batteries are dead or inserted the wrong way.

b)The headphones are off and the batteries are not being charged.

12Battery compartments (beneath detachable ear pad): As delivered, the battery compartments contain two 1.2 V NiMH rechargeable batteries.

13VOLUME: Sets the loudness level of the headphones.

14AUTOTUNING: This switch activates the Autotuning function.

15Charging socket: 0.1 in. coaxial socket for connecting the charging cable of the charger.

2.5 Charger (Fig. 3)

16Charger: The supplied charger (6 VDC, 100 mA) lets you charge the battery inside the transmitter or the batteries inside the headphones.

17Charging cable

180.1 in. coaxial connector matching the charging sockets on the transmitter and headphones.

3 Setting Up

3.1 Charging Batteries

In order to ensure the longest possible service life for the rechargeable batteries, we deliver them uncharged. Therefore, charge the supplied batteries before first operating your head- phones system.

Important!

•If you operate the transmitter or headphones on dry batteries, never try to recharge these batter-

ies. This would cause serious damage to your trans- mitter or headphones. Dispose of dead batteries con- forming to local waste disposal rules.

•Do not use any charger other than the charger sup- plied with your headphone system! Using other types of chargers or AC adapters may damage the transmit- ter and/or headphones.

3.1.1 Charging the Battery inside the Transmitter

1.Open the battery compartment (8).

2.Insert the supplied rechargeable battery into the battery compartment (8) so that the positive contact points at the connector (5). (If you insert the battery the wrong way, the battery will not be charged.)

3.Close the battery compartment (8).

4.Plug the charging cable (17) into the charging socket (7) on the transmitter.

5.Check that the AC voltage stated on the charger is the same as that available where you are going to use the charger. If it is, connect the charger (16) to a convenient AC outlet.

The status LED (2) will be lit red or yellow to indicate the battery inside the transmitter is being charged.

The battery will be fully charged after approximately 10 hours. (If the Status LED (2) was lit red, it will go out. If it was lit yellow it will change to green.)

6.Unplug the charging cable (17) from the transmitter and disconnect the charger (16) from the power outlet. (The charging current is very low, so the transmitter or battery will not be damaged even if you forget to unplug the charging cable.)

3.1.2 Charging the Batteries inside the Headphones

1.Pull the protective foil out of the earphone in a straight line to establish electrical contact between the batteries and the electronics of the headphones.

2.Plug the charging cable (17) into the charging socket (15) on the headphones.

3.Check that the AC voltage stated on the charger is the same as that available where you are going to use the charger. If it is, connect the charger (16) to a convenient AC outlet.

The Status LED (11) will be lit red or yellow to indicate the batteries inside the headphones are being charged.

The batteries will be fully charged after approximately 10 hours. (The Status LED (11) will go out or change to green.)

4.Unplug the charging cable (17) from the headphones and disconnect the charger (16) from the power outlet. (The charging current is very low, so the headphones or batter- ies will not be damaged even if you forget to unplug the charging cable.)

3.1.3 Discharging Batteries

In order to maintain full battery capacity for as long as possi- ble, discharge the batteries completely about once a month:

1.Switch the transmitter or headphones on and leave it/ them on the shelf until the status LED goes out.

2.Recharge the battery/batteries.

3.2 Replacing Batteries

The capacity of any rechargeable battery will decrease over time. If you feel that you need to recharge the supplied bat- teries more often than would be convenient, you may consid- er replacing the batteries with new AAA size 1.2 V recharge- able or 1.5 V alkaline dry batteries.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Merlin Beschreibung Sicherheit und UmweltLadegerät Fig Sender FigHinweis Kopfhörer Fig Zusammenklappbarer Kopfbügel 10 Ein/Aus-TasteInbetriebnahme Stationärer Betrieb Sender anschließen Fig HinweisSender am Audiogerät befestigen Fig Anlage in Betrieb nehmen Siehe FigReinigung BedienungshinweiseFehler Mögliche Ursache Abhilfe FehlerbehebungKopfhörer Merlin K Technische DatenSystemdaten Sender Merlin TEnvironment Safety and EnvironmentSafety DescriptionVelcro strip Warranty cardHeadphones Fig Folding arches 10 On/off switch Neoprene bagSetting Up Stationary Operation Headphones FigConnecting the Transmitter Fig Powering UpOperating Notes CleaningSymptom Possible Cause Remedy TroubleshootingMerlin T 232 Transmitter SpecificationsMerlin K 232 Headphones System PerformanceCasque Merlin K 232 avec récepteur incorporé Sécurité et environnementSécurité Environnement17 Câble de charge Emetteur FigRemarque Chargeur FigComment charger les accus dans le casque Mise en serviceRemplacement des accus Charge des accusUtilisation stationnaire Mise en service de l’installationBranchement de l’émetteur Fig Remarque Nettoyage Instructions pour l’utilisationErreur Cause possible Intervention DépannageEmetteur Merlin T Caractéristiques techniquesDistorsions SystèmeDescrizione Sicurezza e ambienteCaricabatterie Fig AvvertenzaCuffia Fig Archetto sopratesta pieghevole Tasto on/off Messa in esercizio Esercizio stazionario Come collegare il trasmettitore Fig AvvertenzaCome fissare il trasmettitore sull’apparecchio audio Fig Come mettere in esercizio l’impianto Vedi figPulizia Istruzioni per l’impiegoErrore Posibile causa Rimedio Errori e rimediTrasmettitore Merlin T Dati tecniciSuono distorto Dati sistemiciDescripción Seguridad y medio ambienteCargador Fig Transmisor FigNota Casco de auriculares Fig Muelle plegable Tecla ON/OFFPuesta en servicio Funcionamiento estacionario Conectar el transmisor Fig NotaPoner en funcionamiento el equipo Véase Fig Limpieza Instrucciones de manejoFalla Causa posible Reparación Reparación de fallasTransmisor Merlin T Datos técnicosSonido distorsionado Datos del sistemaBeschrijving Veiligheid en milieuOplaadkabel Zender FigAdvies Acculader FigBedrijf nemen Stationair bedrijf De apparatuur in gebruik nemen Zie figReiniging Aanwijzingen voor de bedieningFout Mogelijke oorzaak Oplossing Fouten oplossenHoofdtelefoon Merlin K Technische gegevensSysteemgegevens Zender Merlin TPage Page DVD Merlin AKG ACOUSTICS, U.S

MERLIN 232 specifications

The AKG Acoustics MERLIN 232 is an innovative headset that reflects the company's commitment to delivering exceptional audio performance and user comfort. Designed for studio professionals, broadcast engineers, and avid audiophiles, the MERLIN 232 integrates cutting-edge audio technologies with a sleek, ergonomic design.

One of the standout features of the MERLIN 232 is its high-definition sound quality. Equipped with custom-designed 40mm drivers, this headset ensures clarity across the audio spectrum. With an extended frequency range, from deep bass to crisp highs, the headphones deliver a faithful reproduction of sound, making them ideal for critical listening applications. The advanced transducer technology employed in the MERLIN 232 minimizes distortion, allowing users to appreciate intricacies in their audio like never before.

Comfort is another hallmark of the MERLIN 232. The design includes plush ear pads and an adjustable headband, providing a secure yet comfortable fit for extended listening sessions. The lightweight construction minimizes pressure on the head, which is particularly beneficial for professionals who spend long hours using headphones in studios or during broadcasts.

Another notable feature is the flexible, multi-directional microphone system incorporated into the design. This mic allows for clear communication, making the MERLIN 232 an excellent choice for podcasters and content creators. The microphone is equipped with noise-canceling technology, significantly reducing background noise and ensuring that the user's voice comes through clearly, a critical aspect in professional environments.

The MERLIN 232 also boasts a durable build quality that reflects AKG's reputation for reliability. It features robust hinges and a foldable design, making it not only sturdy but also portable. This portability ensures that the headphones can easily be packed away and transported, catering to users who are always on the move.

In terms of connectivity, the MERLIN 232 is versatile, offering both wired and wireless options. It supports Bluetooth connectivity for seamless pairing with various devices, along with traditional audio jacks for a wired connection, ensuring compatibility with a wide range of audio sources.

Ultimately, the AKG Acoustics MERLIN 232 is an impressive headset that merges superior sound quality with user-centric design features. Ideal for those who demand high fidelity and comfort in their audio equipment, the MERLIN 232 is a worthy investment for anyone serious about sound.
Top Page Image Contents