Zanussi ZKT6050 user manual Operation Ceramic hob, Automatic warm up, Using the hob timer

Page 12

Operation

The ceramic hob

WARNING!

Do not use the appliance if the ceramic glass is damaged. If a fault or crack becomes visible, disconnect the appliance immediately from the electricity supply and contact your local service force centre.

Using the hob

•The hob must be switched on before setting any cooking function or programme.

•For single hotplates press the increase or decrease control to vary the heat setting. The highest number represents the hottest setting and the lowest number represents the coolest setting. Choose a setting appropriate to the quantity and type of food to be cooked.

•To turn off a hob element press increase and decrease controls together.

Automatic warm up

All cooking zones are equipped with an automatic warm up function. The cooking zone switches to full power for a certain amount of time and then automatically switches back to the heat setting set.

Press the increase control and scroll through the heat settings to 9 then press the increase control again 'A' will show in the display. An audible signal will sound. Now press the decrease control to the setting you require. The hob will show 'A' in the display until the Automatic warm up programme has finished then returns to the setting set.

12

Using the stop + go function

The stop + go function switches all cooking zones that are switched on to the keep warm setting and then back to the heat setting that was previously set.

This function can be used to briefly interrupt and then continue the cooking process.

To switch on press the stop and go control. The hob display will show the keep warm symbol .

To switch off press the stop and go control. The display will revert to the heat setting that was previously set.

Using the hob timer

All cooking zones can use each one of the two timer functions at the same time.

If a cooking zone is switched off, the timer function set is also switched off.

 

Function

 

 

Condition

 

Outcome

 

 

 

 

 

 

 

Acoustic

 

 

 

 

 

 

 

signal

 

Automatic cut-

 

 

 

A heat

 

00 flashes

 

out

 

 

 

setting is set

 

Cooking

 

 

 

 

 

 

 

zone

 

 

 

 

 

 

 

switches off

 

Countdown

 

 

 

Cooking

 

Acoustic

 

 

 

 

zones not in

 

signal 00

 

timer

 

 

 

 

 

 

 

 

use

 

flashes

 

 

 

 

 

 

Page 11 Page 13
Image 12
Page 11 Page 13
Contents User Manual Cooker Contents Important safety instructions InstallationChild safety During useCleaning and maintenance Extreme care must be taken when using a ceramic hob scraperProduct description Controls and their functionsBefore using the appliance Switching the hob on/offRating plate Touch control sensorsSwitching the oven on/off CookwareOperating time Condensation and steamGrill and oven furniture Electronic timer To set the time of dayTo set the countdown To cancel the countdown To set the timer to switch on and off automaticallyTo set the timer to switch off only To set the oven timer controlAutomatic cooking To return the appliance to manualThings to note Turn off the oven controlsUsing the hob Using the stop + go functionUsing the hob timer Operation Ceramic hobSetting the time Switching off the acoustic signalSafety cut-out Selecting a cooking zoneTop oven intelligent grill Using intelligent grill Residual heat HOBTo fit the top oven shelf Grill pan and handle Ensure the handle is correctly locatedAlways remove the grill pan handle during grilling Using the top oven Top ovenUsing main oven fan cooking Main oven grillMain oven fan cooking To fit the main oven shelvesUsing defrost Child lockDefrost Activating the child lockTemperature review Oven Safety cut-outSwitching on after a safety cut- out Function lockGrilling chart FoodTop oven cooking chart TOP Oven Food POS Cooking Approx Temp CFood TOP Oven POS Cooking Approx Temp C Main oven cooking chart Food Cooking Approx Temp CMain oven cooking chart Roasting chart MeattemperatureCooking Time Hints and tips when using the hob Hints and tipsHints and tips when defrosting Care and cleaning Cleaning the grill/oven furniture Cleaning inside the grill and oven compartmentsTo reduce marking of the hob Avoid the useCleaning the doors Cleaning between the outer and inner door glassAerosol cleaners must not be used on Stay- clean surfaces To remove the glassTo clean the glass door panels To replace the door glassTop Oven Main OvenReplacing an oven light bulb Type of bulb required is a 300C 25 watt small Edison ScrewTroubleshooting ProblemTimer does not work Oven is not cooking evenly Possible SolutionOven light fails to illuminate Oven fan is noisy Installation instructions Connecting to the electricity supplyThis appliance must be earthed Safety We recommend you use a new lengthMains terminal cover Ensure that the cover is securely fastenedTechnical details EnvironmentGuarantee / Customer care Standard guarantee conditionsPage 349151003 04/2007
Top Page Image Contents