Zanussi ZKT6050 user manual Before using the appliance, Rating plate, Touch control sensors

Page 6

Before using the appliance

Rating plate

•This is situated on the lower front frame of the appliance and can be seen upon opening the door. Alternatively the rating plate may also be found on the back or top of some models (where applicable).

•The appliance must be protected by a suitably rated fuse or circuit breaker.

•The rating of the appliance is given on the rating plate.

•Do not remove the rating plate from the appliance as this may invalidate the guarantee.

WARNING!

Always allow the cooling fan to cool the appliance down before switching off at the wall prior to carrying out any cleaning or maintenance work.

Touch control sensors

•This appliance is operated using touch control sensors. Functions are controlled by touching sensor fields and confirmed by displays and acoustic signals. Touch the sensor fields from above, without covering other sensor fields.

Preparing to use your appliance

•Wipe over the base of the oven(s) with a soft cloth using hot soapy water. Wash the furniture before use.

•We suggest that you run the oven(s) and grill for 10 – 15 minutes at maximum temperature, to burn off any residue from their surfaces. Accessible parts may become hotter than in normal use. Children should be kept away. During this period an odour may be emitted, it is therefore advisable to open a window for ventilation.

The cooling fan for the controls

•The cooling fan comes on immediately when the grill/top oven is switched on and after a short time when the main oven is in use. It may run on after the controls are switched off until the appliance has cooled.

•During the initial period the cooling fan may turn on and off, this is quite normal.

Switching the hob on/off

•The hob must be switched on before setting

any cooking function or programme. When the on/off touch sensoris pressed and held, the hotplate settings will show in the electronic display.

•To switch off the hob, you can press and hold the on/off touch sensorat any time. Any cooking functions or programme will stop.

•After switching on, within approximately 10 seconds a heat setting or function must be set, otherwise the appliance automatically switches itself off.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents User Manual Cooker Contents Child safety Important safety instructionsInstallation During useCleaning and maintenance Extreme care must be taken when using a ceramic hob scraperProduct description Controls and their functionsRating plate Before using the applianceSwitching the hob on/off Touch control sensorsOperating time Switching the oven on/offCookware Condensation and steamGrill and oven furniture Electronic timer To set the time of dayTo set the countdown To set the timer to switch off only To cancel the countdownTo set the timer to switch on and off automatically To set the oven timer controlThings to note Automatic cookingTo return the appliance to manual Turn off the oven controlsUsing the hob timer Using the hobUsing the stop + go function Operation Ceramic hobSafety cut-out Setting the timeSwitching off the acoustic signal Selecting a cooking zoneTop oven intelligent grill Using intelligent grill Residual heat HOBTo fit the top oven shelf Grill pan and handle Ensure the handle is correctly locatedAlways remove the grill pan handle during grilling Using the top oven Top ovenMain oven fan cooking Using main oven fan cookingMain oven grill To fit the main oven shelvesDefrost Using defrostChild lock Activating the child lockSwitching on after a safety cut- out Temperature reviewOven Safety cut-out Function lockGrilling chart FoodTop oven cooking chart TOP Oven Food POS Cooking Approx Temp CFood TOP Oven POS Cooking Approx Temp C Main oven cooking chart Food Cooking Approx Temp CMain oven cooking chart Roasting chart MeattemperatureCooking Time Hints and tips when using the hob Hints and tipsHints and tips when defrosting Care and cleaning To reduce marking of the hob Cleaning the grill/oven furnitureCleaning inside the grill and oven compartments Avoid the useAerosol cleaners must not be used on Stay- clean surfaces Cleaning the doorsCleaning between the outer and inner door glass To remove the glassTop Oven To clean the glass door panelsTo replace the door glass Main OvenReplacing an oven light bulb Type of bulb required is a 300C 25 watt small Edison ScrewTimer does not work Oven is not cooking evenly TroubleshootingProblem Possible SolutionOven light fails to illuminate Oven fan is noisy Installation instructions Connecting to the electricity supplyThis appliance must be earthed Mains terminal cover SafetyWe recommend you use a new length Ensure that the cover is securely fastenedTechnical details EnvironmentGuarantee / Customer care Standard guarantee conditionsPage 349151003 04/2007
Top Page Image Contents