Installation for Units Equipped with Casters

INSTALLATION continued

Installation for Units Equipped with Casters

A.The installation shall be made with a connector that complies with the Standard for Connectors for Moveable Gas Appliances, ANSI Z21..69/CSA 6..16, Addenda Z21..69B-2006/CSA 6..16B-2006 (or latest edition), and a quick-disconnect device that complies with the Standard for Quick Disconnects for Use with Gas Fuel, ANSI Z21..41/ CSA 6..9, Addenda Z21..41A-2005/CSA 6..16A-2005 (or latest edition)..

B.Raise the front of the appliance and block.. Do not lay the appliance on its back..

C.Caster are threaded to be easily screwed into the holes provided on the bottom of the range.. It is important to add the washers supplied to help distribute force on the range when being moved..

	WASHER	BOTTOM
BOTTOM	PROTECTIVE	OF
OF	PLASTIC ON	APPLIANCE
APPLIANCE	THIS SIDE

FIXED CASTER	ADJUSTABLE CASTER
(SHOWN W/O BRAKE)	(SHOWN W/O BRAKE)

D.Place the washer on the caster stem as shown.. Since the washer is slightly cupped, it is critical that the side with the plastic is up and mates with the bottom of the appliance.. With the washer in place, thread the caster onto the appliance tightly.. It is not necessary to remove the plastic from the washer..

E.The front casters of the unit are equipped with brakes to limit the movement of the unit without depending on the connector and any quick-disconnect device or its associated piping to limit the appliance movement..

F.Please be aware, there is a restraint on the unit and if disconnection of the restraint is necessary, be sure to reconnect the restraint after the unit has been returned to its originally installed position..

Cabinet Bases

Cabinet base options are available for all broiler models.. Cabinets are pre-assembled at time of delivery except legs or casters..

Assembly Of Broiler

Steel Grate Rods

Each broiler is supplied with (14) 15”/381mm, (18-BRL), 21”/533mm, (24-BRL), 26” /660mm, (30-BRL), 31”/787mm, (36-BRL) or 2 sets of 21”/533mm (48-BRL) long steel rods.. These rods are to be installed in the grooves on the support brackets, which are atop the burners..

Briquettes

For best cooking results, it is recommended that the correct amount of briquettes are installed in the broiler.. Refer to the table and drawing below for the proper arrangement of briquettes.. When all the briquettes have been placed as instructed, install the top grate sections..

MODEL	18-BRL	24-BRL	30-BRL	36-BRL	48-BRL
Rows
front	7	7	7	7	7
to rear
Rows
left	7	11	14	17	22
to right

Ventilation

The following notes are intended to give general guidance.. For detailed recommendations, refer to the applicable code(s) in the country of destination..These appliances shall be installed in a room with sufficient ventilation to prevent the occurrence of hazardous concentrations of combustion by-products..

A good ventilation system is important for satisfactory performance and it is recommended to install the broiler under a power vented canopy..

Local and/or National Codes dictate the need of ventilation system to be used with this type of equipment.. The following information is provided to give examples of available ventilation system concepts..

Page 10

Part # 4525958 (05/15/09)

G18-BRL, G24-BRL specifications

Garland G24-BRL and G18-BRL are industry-leading barbecues that represent a blend of modern cooking technologies and user-friendly design, making them an ideal choice for both backyard enthusiasts and professional chefs. These grills are designed to offer a top-notch grilling experience with a variety of features that enhance performance and convenience.

One of the standout features of the G24-BRL and G18-BRL models is their high-performance burners. These grills are equipped with powerful stainless steel burners that ensure even heat distribution across the cooking surface. This technology allows for perfectly cooked meals, whether you are searing steaks or roasting vegetables. Both models also include multiple burner controls, enabling users to create zones of direct and indirect heat, which is perfect for various cooking techniques.

In terms of construction, the G24-BRL and G18-BRL are built with durability in mind. The bodies are crafted from heavy-duty stainless steel, offering resistance to rust and corrosion while maintaining a sleek, professional appearance. The grills are designed not only for performance but also for longevity, making them suitable for year-round use in diverse weather conditions.

Another significant aspect of these barbecues is their ample cooking space. The G24-BRL model features a spacious grilling area that allows you to cook for a larger number of guests without compromising on quality or efficiency. The G18-BRL is slightly smaller but still offers considerable space, making it suitable for family gatherings or intimate get-togethers.

Additionally, both the G24-BRL and G18-BRL models come with practical features such as built-in thermometers for precise temperature control. This allows for greater accuracy when cooking a variety of meats and dishes. The incorporated grease management system efficiently directs drippings away from the burners, reducing flare-ups and ensuring safety while grilling.

For ease of use, these grills are designed with easy ignition systems, allowing users to start cooking quickly. The removable cooking grates simplify maintenance and cleaning, making it easier to keep the grill in excellent condition after each use.

In summary, the Garland G24-BRL and G18-BRL barbecues combine cutting-edge technology, robust construction, and user-friendly features. Whether you are an occasional griller or a seasoned barbecue master, these models provide the reliability and performance needed to create delicious meals. With their advanced burner systems and thoughtful design, the G24-BRL and G18-BRL set a new standard in grilling excellence.