Z C G 8 0 2 1
The electronic timer
Please note that this is a 24 hour clock, for example 2.00 pm is shown
as 1400. | Cookpot symbol | Bell symbol |
In the following pages we explain how to set the controls. Read through them a few times until you are familiar with the procedure.
Selector Setting knob
If the oven is switched off on the wall, or there is a loss of power, the clock will stop and you will not be able to use the main oven. When you first switch the electricity supply on, the timer display will flash.
To set the time of day
Turn the selector knob to 'Manual' then turn to 'Clock'.
Set the correct time by turning and holding the setting knob clockwise. Adjust the time by turning the setting knob in either direction.
Turn the selector knob back to 'Manual'.
To use the Timer
Turn the selector knob to 'Timer'. Turn the setting knob clockwise until the display shows the time you want. The
bell symbol ( ) will be showing and this will stay lit up during the time. Our diagram shows the timer set to 5 minutes.
If you change your mind and want to cancel the time you have set, simply turn the setting knob anticlockwise. Then turn the selector to 'Manual'.
The electronic timer
21