Zanussi ZDS 699 EX manual External cleaning, Frost precautions, Moving the machine

Page 19

Check that the SID is not clogged with detergent residue. If necessary rinse it under running water after having removed it from the basket by twisting it anticlockwise and pulling it upwards.

Fasten it back onto the support by turning it clockwise.

Never use your dishwasher without the SID dispenser.

Since SID also ensures correct distribution of the water to the upper spray arm, running the dishwasher without it will impair the washing results.

External cleaning

Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....).

Prolonged periods of non-operation

If you are not using the machine for any period of time you are advised to:

1.Unplug the appliance and then turn off the water.

2.Fill the rinse aid dispenser.

3.Leave the door ajar to prevent the formation of any unpleasant smells.

4.Leave the inside of the machine clean.

Frost precautions

Avoid placing the machine in a location where the temperature is below 0°C. If this is unavoidable, empty the machine, close the appliance door, disconnect the water inlet pipe and empty it.

Moving the machine

If you have to move the machine (moving house etc....):

1.Unplug it.

2.Turn the water tap off.

3.Remove the water inlet and discharge hoses.

4.Pull the machine out together with the hoses. Avoid over tilting the machine during transportation.

MA12

19

MAN07en

Image 19

Contents Dishwasher Contents During Use Important safety informationInstallation Child SafetyWater tap Control panelOpen door SaltCycle will be carried out Aid is automatically excludedAudible signals Use salt from level 1 upwards Setting the water softenerBefore use PressTo fill Filling with saltTo fill with salt, unscrew the cap of the salt container Rinse aid Adjusting the doseEnsure that the lid is closed after every refill Open the door and slide out the baskets to load the dishes Using your applianceLoading your appliance Lower basketRemovable knife basket Cutlery basketFor best results use the cutlery grid/s inserts provided To move to the higher position proceed as follows Adjusting the height of the upper basketWhen the top basket is in the higher Upper basketCompact detergents with enzymes If using powder detergents proceed as followsIf using detergent in tablets proceed as follows Use of detergentItems not suitable for dishwashers Hints and tipsTo save energy For best washing resultsWashing programmes Operating sequence It is now possible to select a new washing programme Current programmeAt the end of the washing programme Cleaning the central filter Internal cleaningCleaning the large filter Moving the machine External cleaningFrost precautions Leave the inside of the machine cleanActions listed below Something not workingSlough Berkshire Service and spare partsProtection against flooding Customer Care DepartmentThis guarantee does not cover Guarantee conditionsStandard guarantee conditions European GuaranteeTo contact your local Zanussi Service Centre telephone Zanussi Service ForceMidlands Hints for test centres Technical specificationsLocknut must be correctly fitted to avoid water leaks Installation instructionsWater supply connections Nevertheless we advise a cold water supplyWaste connection must be at a height of between Water outlet hose connectionElectrical connection Building-in Recess height may be anywhere between 820To fit the pad, press it onto the rear foot Width 596 mm Height Furniture door plinthMounting the infill panel Fixing to the adjacent unitsFitting the vapour protection Kitchen plinth adjustmentNoise protection Electrolux Household Appliances Limited From the Electrolux Group. The world’s No.1 choice