Zanussi ZDS 699 EX Furniture door plinth, Mounting the infill panel, Fixing to the adjacent units

Page 30

The furniture door plinth

The door on this appliance is designed for the overlay of a door plinth having the following dimensions:

Width:	596 mm
Height:	50 mm (min) - 120 mm (max)
Thickness:	20 mm max

The panel height should be no more than indicated, otherwise complete opening of the door will no longer be possible as the panel hits against the dishwasher plinth.

Mounting the infill panel

1.Drill the panel with a Ø 2 x 12 bit according to the dimensions indicated in the figure.

2.Fix the panel to the cross bar provided with 2 screws 3.5 x 16.

3.Fix the cross bar to the dishwasher door with 2 screws 3.5 x 16 after having inserted the two hooks of the cross bar on the lower section of the door.

Fixing to the adjacent units

To prevent the dishwasher tilting, it must be secured to either the worktop or adjacent kitchen cabinet/wall using the brackets supplied.

Insert the two fixing brackets into the slots provided in the top front part of the dishwasher as shown in the figure.

Secure the brackets to the adjacent units with the 3.5 x 16 screws using the upper or the side holes.

The appliance must be secured to the underside of the worktop using the brackets provided.

Failure to do this could cause damage or injury.

Attention!

The sides of the dishwasher must never be drilled to prevent damage to hydraulic components.

	114
7
461	820
	50
	120:
14	220
II71

458

II69

II70

II54

30

INS10en

Image 30

Contents Dishwasher Contents Child Safety Important safety informationInstallation During UseSalt Control panelOpen door Water tapAid is automatically excluded Cycle will be carried outAudible signals Press Setting the water softenerBefore use Use salt from level 1 upwardsFilling with salt To fillTo fill with salt, unscrew the cap of the salt container Adjusting the dose Rinse aidEnsure that the lid is closed after every refill Lower basket Using your applianceLoading your appliance Open the door and slide out the baskets to load the dishesCutlery basket Removable knife basketFor best results use the cutlery grid/s inserts provided Upper basket Adjusting the height of the upper basketWhen the top basket is in the higher To move to the higher position proceed as followsUse of detergent If using powder detergents proceed as followsIf using detergent in tablets proceed as follows Compact detergents with enzymesFor best washing results Hints and tipsTo save energy Items not suitable for dishwashersWashing programmes Operating sequence Current programme It is now possible to select a new washing programmeAt the end of the washing programme Internal cleaning Cleaning the central filterCleaning the large filter Leave the inside of the machine clean External cleaningFrost precautions Moving the machineSomething not working Actions listed belowCustomer Care Department Service and spare partsProtection against flooding Slough BerkshireEuropean Guarantee Guarantee conditionsStandard guarantee conditions This guarantee does not coverZanussi Service Force To contact your local Zanussi Service Centre telephoneMidlands Technical specifications Hints for test centresNevertheless we advise a cold water supply Installation instructionsWater supply connections Locknut must be correctly fitted to avoid water leaksWater outlet hose connection Waste connection must be at a height of betweenElectrical connection Recess height may be anywhere between 820 Building-inTo fit the pad, press it onto the rear foot Fixing to the adjacent units Furniture door plinthMounting the infill panel Width 596 mm HeightKitchen plinth adjustment Fitting the vapour protectionNoise protection From the Electrolux Group. The world’s No.1 choice Electrolux Household Appliances Limited