Zanussi ZDS 699 EX manual Current programme, It is now possible to select a new washing programme

Page 17

8b. Setting and starting the programme with "delay start"

Once a programme and required options

have been selected to useDELAY proceed as follows:

Press the DELAY push button. The digital display will show "h 0". Press the button again to select the number of hours by which you wish to delay the programme start (up to a maximum of 12 hours).

The delay start will not modify the settings made previously .

To set the time setting to zero press the DELAY push button until "h 0" appears in the digital display.

Press the START pushbutton. The digital display shows the delay time required before the start of the programme.

The start of the countdown will be confirmed by the flashing "h" in the digital display.

Once the delayed time has elapsed the

programme will start automatically.

9.To cancel a programme in progress

Press the " START " pushbutton for 5 seconds to cancel the setting or the running

of the current programme.

All the indicator lights will turn off and 3 horizontal lines will appear in the digital display.

After 5 seconds the dishwasher will return to setting mode.

It is now possible to select a new washing programme.

10.At the end of the washing programme

The dishwasher will automatically stop and an intermittent audible signal will sound when the programme has ended.

3 flashing horizontal lines will appear in the digital display and all the indicator lights will turn off.

To return to setting mode press any of the pushbuttons or switch off and then switch on the dishwasher.

Open the door and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved.

Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.

Important!

In general it is not advisable to open the door while the machine is working; if the door is opened however, a safety device ensures that the machine stops.

Care must be taken if the door is opened during the hot phase or immediately after a programme has finished, as steam may escape.

When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off.

17

SEQ07en

Image 17
Contents Dishwasher Contents Installation Important safety informationChild Safety During UseOpen door Control panelSalt Water tapCycle will be carried out Aid is automatically excludedAudible signals Before use Setting the water softenerPress Use salt from level 1 upwardsTo fill with salt, unscrew the cap of the salt container Filling with saltTo fill Ensure that the lid is closed after every refill Adjusting the doseRinse aid Loading your appliance Using your applianceLower basket Open the door and slide out the baskets to load the dishesFor best results use the cutlery grid/s inserts provided Cutlery basketRemovable knife basket When the top basket is in the higher Adjusting the height of the upper basketUpper basket To move to the higher position proceed as followsIf using detergent in tablets proceed as follows If using powder detergents proceed as followsUse of detergent Compact detergents with enzymesTo save energy Hints and tipsFor best washing results Items not suitable for dishwashersWashing programmes Operating sequence At the end of the washing programme Current programmeIt is now possible to select a new washing programme Cleaning the large filter Internal cleaningCleaning the central filter Frost precautions External cleaningLeave the inside of the machine clean Moving the machineActions listed below Something not workingProtection against flooding Service and spare partsCustomer Care Department Slough BerkshireStandard guarantee conditions Guarantee conditionsEuropean Guarantee This guarantee does not coverTo contact your local Zanussi Service Centre telephone Zanussi Service ForceMidlands Hints for test centres Technical specificationsWater supply connections Installation instructionsNevertheless we advise a cold water supply Locknut must be correctly fitted to avoid water leaksWaste connection must be at a height of between Water outlet hose connectionElectrical connection To fit the pad, press it onto the rear foot Recess height may be anywhere between 820Building-in Mounting the infill panel Furniture door plinthFixing to the adjacent units Width 596 mm HeightNoise protection Kitchen plinth adjustmentFitting the vapour protection Electrolux Household Appliances Limited From the Electrolux Group. The world’s No.1 choice