Zanussi ZDS 699 EX manual Electrical connection

Page 28

Electrical connection

This appliance must be earthed. The manufacturer declines any responsibility should this safety measure not be observed.

If the plug that is fitted to your appliance is not suitable for the socket, it must be cut off and the appropriate plug fitted.

Important

The wires on the mains lead are coloured in accordance with the following code:

Green and Yellow	-Earth
Blue	-Neutral
Brown	-Live

If you fit your own plug, the colours of the wires in the mains lead of your appliance may not correspond with the markings identifying the terminals in your plug.

Proceed as follows:

1.Connect the Green and Yellow (earth) wire to the terminal in the plug which is marked with the letter

"E" or the earth symbol	or coloured green and
yellow.	CE03

2.Connect the Blue (neutral) wire to the terminal in the plug which is marked with the letter "N" or coloured black.

3.Connect the Brown (live) wire to the terminal in the plug which is marked with the letter "L" or coloured red.

The plug moulded onto the lead incorporates a 13amp

BSI362 fuse. Only ASTA or BSI fuses should be used.

The plug must not be used if the fuse cover/carrier is lost. The cover/carrier is indicated by the coloured insert at the base of the product.

A replacement cover/carrier must be obtained from your local Service Force Centre.

This appliance complies with the following E.E.C.

Directives:

-73/23 or 19.2.73 (Low Voltage Directive) and subsequent modifications;

-89/336 or 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.

28

COLUKen

Image 28

Contents Dishwasher Contents Important safety information InstallationChild Safety During UseControl panel Open doorSalt Water tapAid is automatically excluded Cycle will be carried outAudible signals Setting the water softener Before usePress Use salt from level 1 upwardsTo fill Filling with saltTo fill with salt, unscrew the cap of the salt container Rinse aid Adjusting the doseEnsure that the lid is closed after every refill Using your appliance Loading your applianceLower basket Open the door and slide out the baskets to load the dishesRemovable knife basket Cutlery basketFor best results use the cutlery grid/s inserts provided Adjusting the height of the upper basket When the top basket is in the higherUpper basket To move to the higher position proceed as followsIf using powder detergents proceed as follows If using detergent in tablets proceed as followsUse of detergent Compact detergents with enzymesHints and tips To save energyFor best washing results Items not suitable for dishwashersWashing programmes Operating sequence It is now possible to select a new washing programme Current programmeAt the end of the washing programme Cleaning the central filter Internal cleaningCleaning the large filter External cleaning Frost precautionsLeave the inside of the machine clean Moving the machineSomething not working Actions listed belowService and spare parts Protection against floodingCustomer Care Department Slough BerkshireGuarantee conditions Standard guarantee conditionsEuropean Guarantee This guarantee does not coverZanussi Service Force To contact your local Zanussi Service Centre telephoneMidlands Technical specifications Hints for test centresInstallation instructions Water supply connectionsNevertheless we advise a cold water supply Locknut must be correctly fitted to avoid water leaksWater outlet hose connection Waste connection must be at a height of betweenElectrical connection Building-in Recess height may be anywhere between 820To fit the pad, press it onto the rear foot Furniture door plinth Mounting the infill panelFixing to the adjacent units Width 596 mm HeightFitting the vapour protection Kitchen plinth adjustmentNoise protection From the Electrolux Group. The world’s No.1 choice Electrolux Household Appliances Limited