Zanussi ZDS 699 EX manual Audible signals

Page 6

Audible signals

Audible signals have been introduced to help indicate which operations the dishwasher is performing.

Short "instruction accepted" signal

When any of the push buttons are pressed, a short audible signal informs you that the machine has accepted the instruction given.

Long "programme run" signal

A continuous audible signal informs you that the washing programme is starting.

Intermittent "end of programme" signal

An intermittent audible signal informs you that the wash programme has ended.

"Alarm" intermittent signal

The machine is fitted with a number of alarm systems to help you determine the cause of any problems (see "Something not working").

An intermittent audible signal informs you that an alarm is activated.

To deactivate	these audible signals, press
simultaneously and keep pressed both		HALF LOAD
and DELAY	push buttons.

After about 3 seconds 3 short intermittent audible signals inform you that the audible signals have been deactivated.

SO263

To reactivate	these audible signals, press
simultaneously and keep pressed both		HALF LOAD
and DELAY	push buttons.

After about 3 seconds 3 short intermittent audible signals inform you that the audible signals have been reactivated.

Both operations (to deactivate or reactivate the audible signals) must be carried out before starting a washing programme; the setting will remain memorised after switching off the dishwasher.

6

APP08en

Image 6

Contents Dishwasher Contents Child Safety Important safety informationInstallation During UseSalt Control panelOpen door Water tapAid is automatically excluded Cycle will be carried outAudible signals Press Setting the water softenerBefore use Use salt from level 1 upwardsFilling with salt To fillTo fill with salt, unscrew the cap of the salt container Adjusting the dose Rinse aidEnsure that the lid is closed after every refill Lower basket Using your applianceLoading your appliance Open the door and slide out the baskets to load the dishesCutlery basket Removable knife basketFor best results use the cutlery grid/s inserts provided Upper basket Adjusting the height of the upper basketWhen the top basket is in the higher To move to the higher position proceed as followsUse of detergent If using powder detergents proceed as followsIf using detergent in tablets proceed as follows Compact detergents with enzymesFor best washing results Hints and tipsTo save energy Items not suitable for dishwashersWashing programmes Operating sequence Current programme It is now possible to select a new washing programmeAt the end of the washing programme Internal cleaning Cleaning the central filterCleaning the large filter Leave the inside of the machine clean External cleaningFrost precautions Moving the machineSomething not working Actions listed belowCustomer Care Department Service and spare partsProtection against flooding Slough BerkshireEuropean Guarantee Guarantee conditionsStandard guarantee conditions This guarantee does not coverZanussi Service Force To contact your local Zanussi Service Centre telephoneMidlands Technical specifications Hints for test centresNevertheless we advise a cold water supply Installation instructionsWater supply connections Locknut must be correctly fitted to avoid water leaksWater outlet hose connection Waste connection must be at a height of betweenElectrical connection Recess height may be anywhere between 820 Building-inTo fit the pad, press it onto the rear foot Fixing to the adjacent units Furniture door plinthMounting the infill panel Width 596 mm HeightKitchen plinth adjustment Fitting the vapour protectionNoise protection From the Electrolux Group. The world’s No.1 choice Electrolux Household Appliances Limited