Zanussi ZDS 699 EX manual Filling with salt, To fill

Page 8

Filling with salt

Only use salt specifically designed for use in dishwashers.

All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener.

Only fill with salt just before starting one of the complete washing programmes. This will prevent any grains of salt or salty water, which may have been spilled, remaining on

the bottom of the machine for any period of time, which may cause corrosion.

To fill:

1.To fill with salt, unscrew the cap of the salt container.

2.Pour 1 litre of water inside the container (this is necessary only before filling with salt for the first time).

3.Using the funnel provided, pour in the salt until the container is full.

Do not worry if water over flows from the unit when filling with salt, this is quite normal.

4.Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket.

5.Screw on the cap tightly.

The salt container will require topping up periodically.

You are reminded of this by the salt indicator light on the control panel which comes on when the salt has finished.

The salt indicator light on the control panel can remain illuminated for 2-6 hours after the salt has been replenished, assuming the dishwasher remains switched on. If you are using salts that take longer to dissolve then this can take longer. The function of the machine is not affected.

SALET

SAL

SALZ

SEL

SR06

8

SAL01en

Image 8

Contents Dishwasher Contents Important safety information InstallationChild Safety During UseControl panel Open doorSalt Water tapAid is automatically excluded Cycle will be carried outAudible signals Setting the water softener Before usePress Use salt from level 1 upwardsTo fill with salt, unscrew the cap of the salt container Filling with saltTo fill Ensure that the lid is closed after every refill Adjusting the doseRinse aid Using your appliance Loading your applianceLower basket Open the door and slide out the baskets to load the dishesFor best results use the cutlery grid/s inserts provided Cutlery basketRemovable knife basket Adjusting the height of the upper basket When the top basket is in the higherUpper basket To move to the higher position proceed as followsIf using powder detergents proceed as follows If using detergent in tablets proceed as followsUse of detergent Compact detergents with enzymesHints and tips To save energyFor best washing results Items not suitable for dishwashersWashing programmes Operating sequence At the end of the washing programme Current programmeIt is now possible to select a new washing programme Cleaning the large filter Internal cleaningCleaning the central filter External cleaning Frost precautionsLeave the inside of the machine clean Moving the machineSomething not working Actions listed belowService and spare parts Protection against floodingCustomer Care Department Slough BerkshireGuarantee conditions Standard guarantee conditionsEuropean Guarantee This guarantee does not coverZanussi Service Force To contact your local Zanussi Service Centre telephoneMidlands Technical specifications Hints for test centresInstallation instructions Water supply connectionsNevertheless we advise a cold water supply Locknut must be correctly fitted to avoid water leaksWater outlet hose connection Waste connection must be at a height of betweenElectrical connection To fit the pad, press it onto the rear foot Recess height may be anywhere between 820Building-in Furniture door plinth Mounting the infill panelFixing to the adjacent units Width 596 mm HeightNoise protection Kitchen plinth adjustmentFitting the vapour protection From the Electrolux Group. The world’s No.1 choice Electrolux Household Appliances Limited