Zanussi ZDS 699 EX Internal cleaning, Cleaning the central filter, Cleaning the large filter

Page 18

Maintenance and cleaning

Internal cleaning

Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth.

We recommend the use of Finish Dishwasher Cleaner every 3 months or run a 65°C wash without dishes using detergent. Regular use of Finish Dishwasher Cleaner cleans inaccessible parts, eliminates unpleasant food odours and helps prevent the build-up of limescale.

Cleaning the central filter

(After each wash)

Scraps of food may accumulate in the drain filter (A) and should be removed by rinsing the filter under running water.

To remove the drain filter

- simply pull it out by the handle.

Once cleaned, refit the filter by pushing it back to its original position until it engages.

Cleaning the large filter

(Every week)

If necessary clean the large filter (B) on both sides under running water, using a brush.

To remove the large filter

1.Remove the spray arm by pulling it upwards on one side.

2.Turn the column (C) anticlockwise by 90° and then slide out the filter.

3.Once cleaned refit it following the above instructions in reverse order.

4.Ensure the filter is in its original position, the handle of the drain filter should be pointing towards the front of the appliance.

The dishwasher must not be used without filters.

Incorrect repositioning and fitting of the filters will produce poor washing results. Cleaning the filters is vital to ensure correct operation of the machine.

A

MA04

90°

B

C

MA05

MA21

MA19

MA20

MA18

18

MAN04UKen

Image 18

Contents Dishwasher Contents Child Safety Important safety informationInstallation During UseSalt Control panelOpen door Water tapAid is automatically excluded Cycle will be carried outAudible signals Press Setting the water softenerBefore use Use salt from level 1 upwardsFilling with salt To fillTo fill with salt, unscrew the cap of the salt container Adjusting the dose Rinse aidEnsure that the lid is closed after every refill Lower basket Using your applianceLoading your appliance Open the door and slide out the baskets to load the dishesCutlery basket Removable knife basketFor best results use the cutlery grid/s inserts provided Upper basket Adjusting the height of the upper basketWhen the top basket is in the higher To move to the higher position proceed as followsUse of detergent If using powder detergents proceed as followsIf using detergent in tablets proceed as follows Compact detergents with enzymesFor best washing results Hints and tipsTo save energy Items not suitable for dishwashersWashing programmes Operating sequence Current programme It is now possible to select a new washing programmeAt the end of the washing programme Internal cleaning Cleaning the central filterCleaning the large filter Leave the inside of the machine clean External cleaningFrost precautions Moving the machineSomething not working Actions listed belowCustomer Care Department Service and spare partsProtection against flooding Slough BerkshireEuropean Guarantee Guarantee conditionsStandard guarantee conditions This guarantee does not coverZanussi Service Force To contact your local Zanussi Service Centre telephoneMidlands Technical specifications Hints for test centresNevertheless we advise a cold water supply Installation instructionsWater supply connections Locknut must be correctly fitted to avoid water leaksWater outlet hose connection Waste connection must be at a height of betweenElectrical connection Recess height may be anywhere between 820 Building-inTo fit the pad, press it onto the rear foot Fixing to the adjacent units Furniture door plinthMounting the infill panel Width 596 mm HeightKitchen plinth adjustment Fitting the vapour protectionNoise protection From the Electrolux Group. The world’s No.1 choice Electrolux Household Appliances Limited