Zanussi ZDS 699 EX manual Hints for test centres, Technical specifications

Page 25

Hints for test centres

Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser.

Test standard	EN 50242

Reference programme:	Bio 50°C with prewash

Load:	12 standard place settings

Rinse aid selector:	position 5

Detergent dosage :	30 g in the dispenser

US66

Arrangement

upper basket

UI48

Arrangement

lower basket

UI69

Arrangement cutlery basket

US67

Arrangement knife basket

Technical specifications

DIMENSIONS	Width			59.6 cm
		Height with worktop	81.8 - 87.8 cm
		Max depth		59 cm
		Max depth with open door	111.4 cm

ELECTRICAL CONNECTION	Voltage		220/240 V - 50 Hz
MOTOR RATING DURING WASH			200 W
POWER OF HEATING ELEMENT			2100 W
OVERALL POWER				2300 W

WATER SUPPLY PRESSURE	Minimum		50 kPa (0.5 bar)
		Maximum	800	kPa (8 bar)

CAPACITY				12 place settings

IST22en

Image 25

Contents Dishwasher Contents Installation Important safety informationChild Safety During UseOpen door Control panelSalt Water tapCycle will be carried out Aid is automatically excludedAudible signals Before use Setting the water softenerPress Use salt from level 1 upwardsTo fill Filling with saltTo fill with salt, unscrew the cap of the salt container Rinse aid Adjusting the doseEnsure that the lid is closed after every refill Loading your appliance Using your applianceLower basket Open the door and slide out the baskets to load the dishesRemovable knife basket Cutlery basketFor best results use the cutlery grid/s inserts provided When the top basket is in the higher Adjusting the height of the upper basketUpper basket To move to the higher position proceed as followsIf using detergent in tablets proceed as follows If using powder detergents proceed as followsUse of detergent Compact detergents with enzymesTo save energy Hints and tipsFor best washing results Items not suitable for dishwashersWashing programmes Operating sequence It is now possible to select a new washing programme Current programmeAt the end of the washing programme Cleaning the central filter Internal cleaningCleaning the large filter Frost precautions External cleaningLeave the inside of the machine clean Moving the machineActions listed below Something not workingProtection against flooding Service and spare partsCustomer Care Department Slough BerkshireStandard guarantee conditions Guarantee conditionsEuropean Guarantee This guarantee does not coverTo contact your local Zanussi Service Centre telephone Zanussi Service ForceMidlands Hints for test centres Technical specificationsWater supply connections Installation instructionsNevertheless we advise a cold water supply Locknut must be correctly fitted to avoid water leaksWaste connection must be at a height of between Water outlet hose connectionElectrical connection Building-in Recess height may be anywhere between 820To fit the pad, press it onto the rear foot Mounting the infill panel Furniture door plinthFixing to the adjacent units Width 596 mm HeightFitting the vapour protection Kitchen plinth adjustmentNoise protection Electrolux Household Appliances Limited From the Electrolux Group. The world’s No.1 choice

Hints for test centres

Technical specifications

DIMENSIONS