Zanussi ZDS 699 EX manual Control panel, Open door, Salt, Water tap, Rinse aid

Page 4

Description of the appliance

1.Levelling spacers

2.Upper basket stop

3.Upper spray arm

4.Salt container

5.Large filter

6.Detergent dispenser

7.Control panel

8.Rating plate

9.Rinse aid dispenser

10.Central filter

11.Lower spray arm

12.Upper basket

13."SID" detergent dispenser

The control panel

IN84

1.On/Off indicator light

2.On/Off push button

3.Indicator lights

Open door

Illuminates when the door has not been properly closed.

Salt

Illuminates when the salt has run out, to remind you to refill the salt container.

4 5 6 7 8 9 10

Water tap

Flashes when:

-The water tap is closed.

-The mains water supply has been cut off.

-The inlet hose may be blocked.

Rinse aid

Illuminates when the rinse aid has run out, to remind you to refill the rinse aid dispenser.

4.Programme selection push button

For the setting of the wash programme refer to the "Washing programmes" chart.

APP09en

Image 4

Contents Dishwasher Contents Important safety information InstallationChild Safety During UseControl panel Open doorSalt Water tapAid is automatically excluded Cycle will be carried outAudible signals Setting the water softener Before usePress Use salt from level 1 upwardsTo fill Filling with saltTo fill with salt, unscrew the cap of the salt container Rinse aid Adjusting the doseEnsure that the lid is closed after every refill Using your appliance Loading your applianceLower basket Open the door and slide out the baskets to load the dishesRemovable knife basket Cutlery basketFor best results use the cutlery grid/s inserts provided Adjusting the height of the upper basket When the top basket is in the higherUpper basket To move to the higher position proceed as followsIf using powder detergents proceed as follows If using detergent in tablets proceed as followsUse of detergent Compact detergents with enzymesHints and tips To save energyFor best washing results Items not suitable for dishwashersWashing programmes Operating sequence It is now possible to select a new washing programme Current programmeAt the end of the washing programme Cleaning the central filter Internal cleaningCleaning the large filter External cleaning Frost precautionsLeave the inside of the machine clean Moving the machineSomething not working Actions listed belowService and spare parts Protection against floodingCustomer Care Department Slough BerkshireGuarantee conditions Standard guarantee conditionsEuropean Guarantee This guarantee does not coverZanussi Service Force To contact your local Zanussi Service Centre telephoneMidlands Technical specifications Hints for test centresInstallation instructions Water supply connectionsNevertheless we advise a cold water supply Locknut must be correctly fitted to avoid water leaksWater outlet hose connection Waste connection must be at a height of betweenElectrical connection Building-in Recess height may be anywhere between 820To fit the pad, press it onto the rear foot Furniture door plinth Mounting the infill panelFixing to the adjacent units Width 596 mm HeightFitting the vapour protection Kitchen plinth adjustmentNoise protection From the Electrolux Group. The world’s No.1 choice Electrolux Household Appliances Limited