Frigidaire FGES3065PF manual Setting Continuous Bake or 6 Hour Energy Saving, Setting the Timer

Page 25
Setting Continuous Bake or 6 Hour Energy Saving

OVEN CONTROLS

Setting Continuous Bake or 6 Hour Energy Saving

The timer on-offand self clean keys control the continuos bake or 6 hour energy saving features. The oven control has a factory preset 6 Hour Energy Saving feature that shuts off the oven if the oven control is left on for more than 6 hours. The oven can be programmed to override this feature for Continuous Baking.

To set the control for continuous bake or 6 hour energy saving:

1.Press and hold timer on-offfor 6 seconds. After 6 seconds 6Hr OFF or StAY On will appear in the display and the control will beep once.

2.Press self clean to switch between the 6 hour energy saving and continuous bake features.

3.Press start to accept the change (display will return to time of day) or press off to reject the change.

6Hr OFF indicates the control is set for the 6 hour energy saving mode. StAY On indicates the control is set for the continuous bake feature.

Temperature Display (Fahrenheit/Celsius)

The broil and self clean keys control the Fahrenheit (°F) or Celsius (°C) temperature display modes. The oven control can be programmed to display temperatures in °F or °C.

The oven is preset at the factory to display in °F.

To change display from °F to °C or °C to °F

1.To tell if the display is set for °F or °C, press broil and hold for 6 seconds. 550° will appear, broil will flash in the display, and a beep will sound. If F appears, the display is set to show temperatures in °F. If C appears, the display is set to show temperatures in °C.

2.Press self clean to switch between °F or °C display modes. The display will show either F or C.

3.Press start to accept the change or press off to reject the change.

Setting Control for Silent Operation

Delay start and self clean keys control the silent control operation feature. The silent control operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.

To change control from normal sound operation to silent control operation:

1.To set oven for normal or silent operation, press and hold delay start. ----will appear and DELAY will flash in the display. After 6 seconds bEEP On or bEEP OFF will appear in the display.

2.Press self clean to switch between normal sound operation and silent operation mode. The display will show either bEEP On or bEEP OFF. If bEEP On appears, the control will operate with normal sounds and beeps. If bEEP OFF appears, the control is in the silent operation mode.

3.Press start to accept the change or press off to reject the change.

To set the control for continuous bake or 6 hour energy saving: NOTE

The control will always beep at the end of a minute timer and will beep when a set temperature has been reached, even if the control is set to silent operation.

Setting the Timer

The timer on-offkey controls the minute timer and serves as an extra timer and can be used during any of the other oven control functions.

To set the minute timer:

1.Press timer on-off.----will appear and timer will flash in the display. Press the number keys to set the desired time.

2.Press start. The time will begin to count down and Timer will stay in the display. When the time expires, End and Timer will show in the display. The clock will beep three times every 30 seconds until timer on-offis pressed.

3.To cancel the minute timer before the set time expires, press timer on-off.

Temperature Display (Fahrenheit/Celsius) NOTE

If start is not pressed, the timer will return to the time of day after 25 seconds.The timer does not start or stop the cooking process.

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Care and Cleaning TABLE OF CONTENTSSetting Surface Controls WarrantyNeed Help? PRODUCT RECORD AND REGISTRATIONProduct Registration Read this Use & Care ManualIMPORTANT SAFETY INSTRUCTIONS CAUTIONS AND WARNINGSTip Over Hazard IMPORTANT SAFETY INSTRUCTIONS IMPORTANT INSTRUCTIONS FOR USING YOUR COOKTOP IMPORTANT INSTRUCTIONS FOR CLEANING YOUR OVEN IMPORTANT INSTRUCTIONS FOR USING YOUR OVENSELF-CLEANING OVENS FOR GLASS COOKTOP ONLYFor ovens to be wired into a junction box For models factory-equipped with a power cordGROUNDING INSTRUCTIONS Using Proper Cookware BEFORE SETTING SURFACE CONTROLSCookware Material Types Figure 1 Testing cookwareFigure 3 Element ON indicator light locations Element ON & hot surface indicator lightsAbout the Ceramic Glass Cooktop About the Radiant Surface ElementsThe available ESEC display settings The electronic surface element control ESEC some modelsESEC hot element indicator message HE Figure 6 Hot element indicator message ESEC power failure indicatorCooktop Sabbath Day Feature and Sb Message ESEC error indicator message ErHome Canning Surface cooking settings SETTING SURFACE CONTROLSTable 1 Recommended settings for surface elements SettingFigure 8 Control knob shown is typical only Single radiant surface elements all modelsTo Operate the Single Radiant Surface Elements To Operate the Dual Surface Element Dual Surface Radiant Element all modelsFigure 9 Inner coil operation L and inner/outer coil operation R SETTING SURFACE CONTROLS Figure 10 Single L, double M, and Triple R Triple Surface Radiant Element some modelsTo Operate the Triple Surface Element Figure 11 Triple radiant elementSETTING SURFACE CONTROLS To Operate the Bridge Radiant Element Bridge surface radiant element some modelsTable 2 Warm zone recommended food settings Keep warm zone some modelsTo Set the keep warm zone control Keep warm zone temperature selectionOven vent location BEFORE SETTING OVEN CONTROLSType of oven racks Removing, replacing, and arranging flat or offset oven racksrack connector bracket Effortless Oven Rack systemdoor connector bracket Figure 17 Connector arm/door connectionEnd should point up, as explained in Step connector arm Figure 19 Effortless oven rack after assemblyconnector door connectorOVEN CONTROLS Oven Controls Featuresbake convect broilSetting 12 or 24 Hour Time of Day Display Setting the ClockTable 3 Minimum and maximum control settings FeatureSetting Control for Silent Operation Setting Continuous Bake or 6 Hour Energy SavingSetting the Timer Temperature Display Fahrenheit/CelsiusSetting Preheat Setting Oven Lockout FeatureOven Light To activate the oven lockout featureTo set the bake temperature to 375F Setting BakeTo change the bake temperature example changing from 375F to 425F Baking Tips For best bake resultsFigure 23 Broil accessories Setting BroilTo set a broil of 500F Table 4 Broiling recommendationsConvection Cooking Setting Convection BakeBenefits of convection cooking Figure 24 Air circulation in convection functionSetting Convection Broil Setting Convection ConvertTo set a convection broil temperature of 500F Convection broiling tipsTo set a convection roast temperature of 375F Setting Convection RoastConvection roasting tips Setting Delay Start Setting Bake Time8. Press delay start Setting My Favorites Recipe some models Setting WarmWarm tips To set warmFigure 27 Using the probe Cooking with Meat ProbeProper placement of probe in food Figure 28 Probe in thickest area of foodTo set probe Figure 32 Probe set to cancel cooking Probe too hot messageFigure 30 Probe set showing probe temperature Figure 31 Probe set to continue cookingTable 5 USDA recommended minimum internal cooking temperatures Setting Slow Cook some modelsFood Type Internal TempAdjusting Oven Temperature Restoring Factory Default SettingTo adjust the oven temperature lower To restore oven control to factory default settingsPower failure while using Sabbath feature Setting the Sabbath Feature For use on the JewishSabbath and Holidays Figure 34 Downward position Warmer Drawer Indicator Light Warmer Drawer some modelsWarm & Ready Drawer Arranging Warmer Drawer Rack PositionsTable 6 Warmer drawer recommended food settings Setting Warmer Drawer Professional ModelKeep warm drawer temperature selection Removing and Replacing the Warmer Drawer To remove the warmer drawer Figure 35 Removal proceduresTo replace keep warm drawer To set a steam clean cycle Steam CleanFigure 37 Steam clean selected 5. Press start Figure 38 Clean around the oven door gasketWhat to expect during self-cleaning Self-Cleaning OperationAdhere to the following cleaning precautions Figure 39 Clean around the oven door gasketWhen the self-clean cycle is completed Setting Self-Clean Cycle DurationTo stop or Interrupt a self-cleaning cycle Cleaning Various Parts of Your Range CARE AND CLEANINGSurface Type RecommendationControl panel Cooktop Cleaning Cooktop MaintenanceFigure 41 Cooktop cleaning Figure 40 Cooktop care For light to moderate soilFigure 42 Cleaning products to avoid General CleaningDo not use the following on the cooktop Aluminum foil and utensilsFigure 46 Replacement and location of hinge arm and roller pin Removing and Replacing the Oven DoorTo remove oven door To replace oven doorReplacing the oven interior light bulb Replacing the oven lightFigure 47 Wall oven Halogen light Oven Baking BEFORE YOU CALLBaking Problems and Solutions Baking ProblemsProblem Solutions to Common ProblemsSolution information see “Cooktop Maintenance” on page see “Cooktop Maintenance” on pagenance” on page Cannot move appliance easily. Appliance must be accessible for service WARRANTY
Top Page Image Contents