GE JG966, JSP36, JD966 owner manual Instructions, Care and Cleaning, Troubleshooting Tips

Page 29

www.GEAppliances.com

Oven Light Replacement

Safety

CAUTION: Before replacing your oven light bulb, disconnect the electrical power to the range at the main fuse or circuit breaker panel.

Be sure to let the light cover and bulb cool completely.

To remove the cover:

To replace the cover:

Line up tabs of lens in front of tabs on housing and rotate clockwise to engage.

Connect electrical power to the range.

Instructions

Twist lens counterclockwise about a quarter turn to remove.

Do not remove any screws to remove the cover.

Replace bulb with a 40-watt appliance bulb.

Operating Instructions

Do not store a soiled broiler pan and grid anywhere in the range.

Broiler Pan & Grid

Do not clean the broiler pan or grid in a self- cleaning oven.

After broiling, remove the broiler pan from the oven. Remove the grid from the pan. Carefully pour out the grease from the pan into a proper container.

Wash and rinse the broiler pan and grid in hot water with a soap-filled or plastic scouring pad.

If food has burned on, sprinkle the grid with detergent while hot and cover with wet paper towels or a dishcloth. Soaking the pan will remove burned-on foods.

Both the broiler pan and grid may be cleaned with a commercial oven cleaner.

Both the broiler pan and grid can also be cleaned in a dishwasher.

Care and Cleaning

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Rail

Stop guide

 

 

 

 

Storage Drawer Removal

To remove the drawer:

Pull the drawer out until it stops.

Lift the front of the drawer until the stops clear the guides.

Remove the drawer.

To replace the drawer:

Place the drawer rails on the guides.

Push the drawer back until it stops.

Lift the front of the drawer and push back until the stops clear the guides.

Lower the front of the drawer and push back until it closes.

Troubleshooting Tips

Oven Heating Elements

Do not clean the broil element. Any soil will burn off when the element is heated. To clean the oven floor, gently lift the bake element. Clean with warm, soapy water.

On some models, the bake element is not exposed and is under the oven floor. If spillovers, residue or ash accumulate on the oven floor, wipe up before self-cleaning.

Consumer Support

29

Image 29
Contents Write the model and serial numbers here RangesSelf-Cleaning ConvectionAll ranges can tip and injury could result Important Safety NoticeSupport Safety InstructionsSurface Units Consumer Support Troubleshooting TipsOperating Instructions Care and Cleaning Care and Cleaning Using the surface unitsConsumer Support Troubleshooting Tips InstructionsInstructions Care and Cleaning Safety Instructions OperatingTemperature Limiter Dual Surface Unit Control KnobSelecting types of cookware Observe the Following Points in Canning SafetyUsing a pressure canner, Support Troubleshooting Tips Care and Cleaning Using the oven controlsOperating Instructions Special features of your oven controlSafety Instructions Cook and Hold Using Convection ConversionHour, 24 Hour or Clock Black-Out Start padCare and Cleaning Troubleshooting Tips Using the Sabbath FeatureHow to Exit the Sabbath Feature How to Set for Regular Baking/RoastingTips TroubleshootingBefore you begin… Aluminum FoilHow to Set the Oven for Broiling SafetyInstructions Operating Broiling GuideCleaning Operating Using the clock and timerConsumer Support Troubleshooting Tips CareHow to Set an Immediate Start and Automatic Stop Cleaning Troubleshooting Tips ConsumerHow to Set a Delayed Start and Automatic Stop Safety InstructionsDo not store the probe in the oven Using the probe. on some modelsTips Consumer Support Using the convection ovenConvection Bake Convection RoastMulti-Shelf Baking Consumer Support Troubleshooting Tips Care and CleaningCookware for Convection Cooking Paper and PlasticOperating Instructions Care and Cleaning Troubleshooting Tips Consumer SupportMeats Convection Roasting GuideUsing the timed features for convection baking Safety Instructions Adjust the oven thermostat-Do it yourselfCleaning Operating Instructions Consumer Support Troubleshooting Tips CareCleaning Troubleshooting Tips Consumer Support Using the self-cleaning ovenBefore a Clean Cycle How to Set the Oven for CleaningHow to Delay the Start of Cleaning Consumer Support Troubleshooting Tips Care and CleaningAfter a Clean Cycle Operating Care and cleaning of the rangeConsumer Support Troubleshooting Tips Care and Cleaning Operating Instructions SafetyLift-Off Oven Door Oven Shelves and Convection Roasting RackInstructions Care and CleaningTroubleshooting Tips Stainless Steel Surfaces on some models Operating Instructions SafetyPainted Surfaces Do not use a steel-wool pad it will scratch the surfaceNormal Daily Use Cleaning Cleaning the glass cooktopCleaning Pad for Burned-On Soil Razor Scraper for Heavy, Burned-On SoilMetal Marks and Scratches Special Care for Sugary SpillsCooktop Seal To Order PartsProblem Possible Causes What To Do Before You Call For Service…Food does not bake Oven temperatureOr roast properly Food does notDuring a clean cycle Clock and timer doClean cycle Is on when you wantPower outage Control signals afterOr start time Display goes blankWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration GE Will Provide GE Electric Range WarrantyWhat GE Will Not Cover Warrantor General Electric Company. Louisville, KYParts and Accessories Schedule ServiceConsumer Support GE Appliances Website Real Life Design Studio

JG966, JD966, JSP36 specifications

The GE JSP36, JD966, and JG966 are advanced electric cooktops designed to meet the needs of modern kitchens. These models combine innovative technology with user-friendly features, making them ideal for both culinary enthusiasts and everyday cooks.

The GE JSP36 is a 36-inch built-in electric cooktop that features a sleek design, offering a minimalist aesthetic to complement any kitchen decor. One of its standout features is the flexible induction technology. This allows the cooktop to heat only the cookware, providing rapid temperature adjustments while maintaining a cool surface. The JSP36 is equipped with multiple cooking zones, including a dedicated bridge element that connects two burners, catering to larger pots and pans, which is perfect for family meals or entertaining guests.

The JD966 model builds on the features of the JSP36, boasting a glass surface that is both elegant and easy to clean. One of its primary technologies is the precise temperature control, allowing for consistent heat application across different settings. With Power Boil and Simmer options, this cooktop allows users to achieve the desired cooking results, from boiling water rapidly to gently simmering sauces. The JD966 also features an indicator hot surface light for safety, ensuring users are aware of the cooktop's temperature status.

Meanwhile, the JG966 showcases a unique combination of induction and a traditional electric element. This model is perfect for those who desire versatility in their cooking methods. The dual zones of this cooktop can handle various cookware types, ensuring optimal results whether using cast iron or stainless steel. The JG966 model also incorporates smart technology, including connectivity options that allow users to monitor cooking progress via a smartphone app, ensuring they never overcook or burn meals.

All three models prioritize energy efficiency and safety. The induction technology of the JSP36 and JG966 uses up to 70% less energy compared to gas cooktops, while the JD966 includes safety features such as auto shut-off and a locked control panel to prevent accidental activations.

In summary, the GE JSP36, JD966, and JG966 offer a mix of advanced features, modern technology, and safety characteristics that cater to the evolving needs of today’s home chefs. Whether you prioritize speed, versatility, or ease of cleaning, these electric cooktops provide exceptional performance for a variety of cooking styles.