GE 10-95 CG warranty Surface Cookware Tips, Types of Cookware, Copper Bottom, Porcelain/enamel

Page 12

SURFACE COOKWARE TIPS

Types of Cookware

The following information will help you choose cookware which will give good performance.

Stainless Steel: highly recommended

Especially good with a sandwich clad bottom. The sandwich bottom combines the benefits of stainless steel (appearance, durability and stability) with the advantages of aluminum or copper (heat conduction, even heat distribution).

Aluminum: heavy weight recommended

Good conductivity. Aluminum residues sometimes appear as scratches on the cooktop, but can be removed if cleaned immediately. Because of its low melting point, thin weight aluminum should not be used.

Copper Bottom:

Good performance, but copper may leave residues which can appear as scratches. The residues can be removed, as long as the cooktop is cleaned immediately. However, do not let these pots boil dry. Overheated metal can bond to glass cooktops.

An overheated copper pot will leave a residue that will permanently stain the cooktop.

Porcelain/enamel:

Good performance only with a thick, flat, smooth bottom. Avoid boiling dry, as porcelain can melt and fuse to the surface.

Glass-ceramic:usable, but not recommended Poor performance. May scratch the surface.

Stoneware: usable, but not recommended Poor performance. May scratch the surface.

Cast Iron: usable, but not recommended Poor performance. May scratch the surface.

• Place only dry pans on the surface units. Do not place lids on the surface units, particularly wet lids.

• We recommend that you use only a flat-bottomed wok. They are available at your local retail store. The bottom of the wok should have the same diameter as the surface unit to ensure proper contact.

• Do not use woks that have support rings. This type of wok will not heat on glass cooktops.

•Some special cooking procedures require specific cookware such as pressure cookers, deep fat fryers, etc. All cookware must have flat bottoms and be the correct size.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents UseandCare& Installation Guide Save time and money. Before you request service… Help US Help YOU…If you received Damaged range… Important Safety Instructions Important Safety InstructionsSelf-Cleaning Oven OvenSave These Instructions Cooktop and Radiant Surface UnitsFeatures of Your Range JBP79Features of Your Range HOW does this Cooktop Compare To Your OLD ONE? Type of Cooktop Description How It Works RadiantCooktop Comparison General Information About Radiant Surface UnitsHow to Set the Controls Dual Surface Unit SwitchCooking Guide for Using Heat Settings Surface ControlsHot Surface Indicator Light Surface ControlsSpecial Notes for Glass Cooktops Surface Cookware Tips Types of CookwareCopper Bottom Porcelain/enamelHow to Check Pan Performance SurfaceResistant, not scratch proof Home Canning Tips Observe the Following Points in CanningCanning should be done on the cooktop only Flat-bottomed canners are required for glass cooktopsGlass Cooktop Cleaning CleaningGlass Cooktop Cleaning Home Canning TipsFeatures of Your Oven Control Broil BakeOven CONTROL, Clock and Timer Features of YourClock and Timer Oven ControlUsing Your Oven Before Using Your OvenOven Shelves Shelf PositionsUsing BakingYour Oven BakingPan Placement Baking PansBaking Guides CookiesHow to Time Bake How to Set Immediate Start and Automatic StopTimed Baking Don’t PeekHow to Set Delay Start and Automatic Stop Quick ReminderAdjust the Oven Thermostat Timed Baking Adjust the Oven ThermostatRoasting Use of Aluminum FoilQuestions and Answers Why is my roast crumbling when I try to carve it?Roasting Guide For Frozen RoastsWhy are my meats not turning out as brown as they should? BroilingShould I salt the meat before broiling? Broiling Guide BroilingOven door should be open to the broil stop position Operating the SELF-CLEANING Oven Before a Clean CycleCleaning Oven How to Set the Oven for CleaningAfter a Clean Cycle To Stop a Clean CycleHow to Set Delay Start of Cleaning Care and Cleaning Operating the Self-Cleaning OvenCare Control Panel and Knobs Cooktop Surface LightMetal Parts Glass WindowCare and Cleaning Lift-Off Oven DoorSure Grip Handle Oven Heating ElementsHow to Remove the Storage Drawer to Clean Under the Range Oven Light ReplacementBroiler Pan and Grid After broiling, removeInstallation Instructions Before YOU BeginStep Step Wire Power Cord Installation Step Wire Conduit Installation Step Final Check QUESTIONS? USE this Problem Solver Problem Possible CauseProblem Solver After Clean CycleProblem Solver If YOU Need ServiceProblem Solver If You ServiceServices NeedWarranty

10-95 CG specifications

The GE 10-95 CG is a notable locomotive designed to meet the demands of freight transport with efficiency and reliability. Built by General Electric, this model showcases a combination of advanced technology and impressive engineering, making it a prominent choice in the rail industry.

One of the primary features of the GE 10-95 CG is its powerful diesel engine. The locomotive is equipped with a 12-cylinder 7FDL engine, capable of producing substantial horsepower that allows it to handle heavy loads across challenging terrains. This engine configuration not only provides reliability but also ensures operational efficiency, allowing for lower fuel consumption over longer distances.

The 10-95 CG is recognized for its distinct, rugged design that is built to withstand diverse environmental conditions. Its robust frame and sturdy body contribute to its longevity and durability, while the optimized aerodynamics reduce drag, enhancing fuel efficiency. The locomotive's structure is designed for easy access and maintenance, allowing operators to keep it in optimal working condition with minimal downtime.

In terms of technologies, the GE 10-95 CG integrates advanced electronic systems that enhance performance and monitoring. The locomotive features a sophisticated microprocessor-based control system that enables precise engine management, ensuring optimal operation under varying conditions. Additionally, the use of dynamic braking technology provides enhanced control, reducing wear and tear on the braking system while improving safety.

The traction system of the GE 10-95 CG employs alternating current (AC) traction motors, which are known for their efficiency and reduced maintenance requirements compared to traditional DC motors. This technology results in better acceleration and overall performance, making the locomotive adept in both hauling heavy freight and navigating tight curves.

Another notable characteristic of the GE 10-95 CG is its ability to operate in multiple unit configurations. This allows for seamless coupling with other locomotives, enabling operators to scale their freight capacity as needed. The versatility of this locomotive makes it a valuable asset in various rail operations.

In summary, the GE 10-95 CG embodies a blend of power, efficiency, and advanced technology. With features designed for durability, operational efficiency, and ease of maintenance, it stands out as a formidable choice for freight transportation in the rail industry. Its innovative systems and robust performance characteristics ensure that it remains a reliable solution for meeting the demands of modern logistics and transportation.
Top Page Image Contents