GE 10-95 CG Broiler Pan and Grid, How to Remove the Storage Drawer to Clean Under the Range

Page 34
Wire cover holder

Oven Shelves

Clean the shelves with an abrasive cleanser or steel wool. After cleaning, rinse the shelves with clean water, rinse and dry.

CARE AND CLEANING

(continued)

NOTE: The oven shelves may also be cleaned in the self-cleaning oven. However, the shelves will darken in color, lose their luster and become hard to slide if cleaned during the self-cleaning cycle. Wipe the shelf supports with cooking oil after self-cleaning to make the shelves slide more easily.

Broiler Pan and Grid

After broiling, remove

the broiler pan and grid from the oven. Remove the grid from the pan.

Carefully pour out grease from the pan into a proper container. Wash and rinse the broiler pan and grid in hot water with a soap-filled or plastic scouring pad.

The enamel grid and broiler pan may be cleaned in the self-clean oven. However, to prevent heavy smoke caused by self-cleaning the greasy soil in the pan, you must first clean off the excess grease.

If food has burned on, sprinkle the grid with detergent while hot and cover with wet paper towels or a dishcloth. Soaking the pan will remove burned-on foods.

The broiler pan may be cleaned with a commercial oven cleaner. If the grid is grey enamel, it can also be cleaned with an oven cleaner. If the grid is chrome, do not use an oven cleaner to clean it.

Do not store a soiled pan and grid anywhere in the range.

Both the broiler pan and grid can also be cleaned in the dishwasher.

How to Remove the Storage Drawer to Clean Under the Range

The area under the range can be reached easily for cleaning by removing the bottom drawer. To remove, pull the drawer out all the way, tilt up the front and remove it. To replace, insert glides at the back of the drawer beyond the stop on range glides. Lift the drawer if necessary to insert easily. Let the front of the drawer down, then push in to close.

Oven Light Replacement

CAUTION: Before replacing your oven light bulb, disconnect the electrical power to the range at the main fuse or circuit breaker panel. Be sure to let the light cover and bulb cool completely.

The oven light bulb is covered with a removable glass cover that is held in place with a bail-shaped wire. Remove the oven door, if desired, to reach cover easily.

To remove:

1. Hold a hand under the cover so it doesn’t fall when released. With fingers of the same hand, firmly push back the wire cover holder. Lift off the cover.

DO NOT REMOVE ANY SCREWS TO REMOVE COVER.

2.Do not touch hot bulb with a wet cloth. Replace bulb with a 40-watt household appliance bulb.

To replace cover:

1.Place it into the groove of the light receptacle. Pull the wire forward to the center of the cover until it snaps into place. When in place, the wire holds the cover firmly. Be certain the wire is in the depression in the center of the cover.

2.Connect electrical power to the range.

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents UseandCare& Installation Guide Help US Help YOU… Save time and money. Before you request service…If you received Damaged range… Important Safety Instructions Important Safety InstructionsSelf-Cleaning Oven OvenSave These Instructions Cooktop and Radiant Surface UnitsFeatures of Your Range JBP79Features of Your Range HOW does this Cooktop Compare To Your OLD ONE? Type of Cooktop Description How It Works RadiantCooktop Comparison General Information About Radiant Surface UnitsCooking Guide for Using Heat Settings How to Set the ControlsDual Surface Unit Switch Surface ControlsSurface Controls Hot Surface Indicator LightSpecial Notes for Glass Cooktops Copper Bottom Surface Cookware TipsTypes of Cookware Porcelain/enamelSurface How to Check Pan PerformanceResistant, not scratch proof Canning should be done on the cooktop only Home Canning TipsObserve the Following Points in Canning Flat-bottomed canners are required for glass cooktopsGlass Cooktop Cleaning Glass Cooktop CleaningCleaning Home Canning TipsFeatures of Your Oven Control Broil BakeClock and Timer Oven CONTROL, Clock and TimerFeatures of Your Oven ControlOven Shelves Using Your OvenBefore Using Your Oven Shelf PositionsYour Oven UsingBaking BakingBaking Guides Pan PlacementBaking Pans CookiesTimed Baking How to Time BakeHow to Set Immediate Start and Automatic Stop Don’t PeekHow to Set Delay Start and Automatic Stop Quick ReminderAdjust the Oven Thermostat Timed Baking Adjust the Oven ThermostatRoasting Use of Aluminum FoilRoasting Guide Questions and AnswersWhy is my roast crumbling when I try to carve it? For Frozen RoastsBroiling Why are my meats not turning out as brown as they should?Should I salt the meat before broiling? Broiling Broiling GuideOven door should be open to the broil stop position Operating the SELF-CLEANING Oven Before a Clean CycleAfter a Clean Cycle Cleaning OvenHow to Set the Oven for Cleaning To Stop a Clean CycleHow to Set Delay Start of Cleaning Operating the Self-Cleaning Oven Care and CleaningCare Metal Parts Control Panel and KnobsCooktop Surface Light Glass WindowSure Grip Handle Care and CleaningLift-Off Oven Door Oven Heating ElementsBroiler Pan and Grid How to Remove the Storage Drawer to Clean Under the RangeOven Light Replacement After broiling, removeInstallation Instructions Before YOU BeginStep Step Wire Power Cord Installation Step Wire Conduit Installation Step Final Check QUESTIONS? USE this Problem Solver Problem Possible CauseProblem Solver After Clean CycleProblem Solver If YOU Need ServiceServices Problem Solver If YouService NeedWarranty

10-95 CG specifications

The GE 10-95 CG is a notable locomotive designed to meet the demands of freight transport with efficiency and reliability. Built by General Electric, this model showcases a combination of advanced technology and impressive engineering, making it a prominent choice in the rail industry.

One of the primary features of the GE 10-95 CG is its powerful diesel engine. The locomotive is equipped with a 12-cylinder 7FDL engine, capable of producing substantial horsepower that allows it to handle heavy loads across challenging terrains. This engine configuration not only provides reliability but also ensures operational efficiency, allowing for lower fuel consumption over longer distances.

The 10-95 CG is recognized for its distinct, rugged design that is built to withstand diverse environmental conditions. Its robust frame and sturdy body contribute to its longevity and durability, while the optimized aerodynamics reduce drag, enhancing fuel efficiency. The locomotive's structure is designed for easy access and maintenance, allowing operators to keep it in optimal working condition with minimal downtime.

In terms of technologies, the GE 10-95 CG integrates advanced electronic systems that enhance performance and monitoring. The locomotive features a sophisticated microprocessor-based control system that enables precise engine management, ensuring optimal operation under varying conditions. Additionally, the use of dynamic braking technology provides enhanced control, reducing wear and tear on the braking system while improving safety.

The traction system of the GE 10-95 CG employs alternating current (AC) traction motors, which are known for their efficiency and reduced maintenance requirements compared to traditional DC motors. This technology results in better acceleration and overall performance, making the locomotive adept in both hauling heavy freight and navigating tight curves.

Another notable characteristic of the GE 10-95 CG is its ability to operate in multiple unit configurations. This allows for seamless coupling with other locomotives, enabling operators to scale their freight capacity as needed. The versatility of this locomotive makes it a valuable asset in various rail operations.

In summary, the GE 10-95 CG embodies a blend of power, efficiency, and advanced technology. With features designed for durability, operational efficiency, and ease of maintenance, it stands out as a formidable choice for freight transportation in the rail industry. Its innovative systems and robust performance characteristics ensure that it remains a reliable solution for meeting the demands of modern logistics and transportation.
Top Page Image Contents