HOW does this Cooktop Compare To Your OLD ONE?

HOW DOES THIS COOKTOP COMPARE

TO YOUR OLD ONE?

This new range has a Radiant glass cooktop. The radiant cooktop works differently than any other type, as to how it conducts heat and how it interacts with different types of cookware.

The following information will help you understand the differences between the Radiant Cooktop and any other type you may have owned in the past.

Type of Cooktop	Description	How It Works
Radiant	Electric coils	Heat travels to the glass surface and then to the cookware, so pans must be flat on
(Glass Cooktop)	under a glass	the bottom for good cooking results. The glass cooktop stays hot enough to
	cooktop.	continue cooking after it is turned off. Remove the pan from the surface unit if
		you want cooking to stop.

Induction	High frequency	Pans must be made of ferrous metals (metal that attracts a magnet). Heat is
	induction coils	produced by a magnetic circuit between the coil and the pan. Heats up right
	under a glass	away and changes heat settings right away, like a gas cooktop. After turning the
	surface.	control off, the glass cooktop is hot from the heat of the pan, but cooking stops
		right away.

Electric Coil	Flattened metal	Heats by direct contact with the pan and by heating the air under the pan. For best
	tubing containing	cooking results, use good quality pans. Electric coils are more forgiving of
	electric resistance	warped pans than radiant or solid disks. Heats up quickly but does not change
	wire suspended	heat settings as quickly as gas or induction. Electric coils stay hot enough to
	over a drip pan.	continue cooking for a short time after they are turned off.

Solid Disk	Solid cast iron	Heats by direct contact with the pan, so pans must be flat on the bottom for good
	disk sealed to the	cooking results. Heats up and cools down more slowly than electric coils. The
	cooktop surface.	disk stays hot enough to continue cooking after it is turned off. Remove the pan
		from the solid disk if you want the cooking to stop.

Gas Burners	Regular or sealed	Flames heat the pans directly. Pan flatness is not critical to cooking results, but
	gas burners use	pans should be well balanced. Gas burners heat the pan right away and change
	either LP gas	heat settings right away. When you turn the control off, cooking stops right away.
	or natural gas.

10-95 CG specifications

The GE 10-95 CG is a notable locomotive designed to meet the demands of freight transport with efficiency and reliability. Built by General Electric, this model showcases a combination of advanced technology and impressive engineering, making it a prominent choice in the rail industry.

One of the primary features of the GE 10-95 CG is its powerful diesel engine. The locomotive is equipped with a 12-cylinder 7FDL engine, capable of producing substantial horsepower that allows it to handle heavy loads across challenging terrains. This engine configuration not only provides reliability but also ensures operational efficiency, allowing for lower fuel consumption over longer distances.

The 10-95 CG is recognized for its distinct, rugged design that is built to withstand diverse environmental conditions. Its robust frame and sturdy body contribute to its longevity and durability, while the optimized aerodynamics reduce drag, enhancing fuel efficiency. The locomotive's structure is designed for easy access and maintenance, allowing operators to keep it in optimal working condition with minimal downtime.

In terms of technologies, the GE 10-95 CG integrates advanced electronic systems that enhance performance and monitoring. The locomotive features a sophisticated microprocessor-based control system that enables precise engine management, ensuring optimal operation under varying conditions. Additionally, the use of dynamic braking technology provides enhanced control, reducing wear and tear on the braking system while improving safety.

The traction system of the GE 10-95 CG employs alternating current (AC) traction motors, which are known for their efficiency and reduced maintenance requirements compared to traditional DC motors. This technology results in better acceleration and overall performance, making the locomotive adept in both hauling heavy freight and navigating tight curves.

Another notable characteristic of the GE 10-95 CG is its ability to operate in multiple unit configurations. This allows for seamless coupling with other locomotives, enabling operators to scale their freight capacity as needed. The versatility of this locomotive makes it a valuable asset in various rail operations.

In summary, the GE 10-95 CG embodies a blend of power, efficiency, and advanced technology. With features designed for durability, operational efficiency, and ease of maintenance, it stands out as a formidable choice for freight transportation in the rail industry. Its innovative systems and robust performance characteristics ensure that it remains a reliable solution for meeting the demands of modern logistics and transportation.