GE 10-95 CG warranty Cooktop Comparison, General Information About Radiant Surface Units

Page 9

General Information About Radiant Surface Units

The radiant cooktop features heating units beneath a smooth glass surface. The surface units are shown by outlines on the glass.

Before you use the cooktop for the first time, clean it with cleaning cream. This helps protect the top and makes clean-up easier.

NOTE: A slight odor is normal when a new cooktop is used for the first time. It is caused by the heating of new parts and insulating materials and will disappear in a short time.

When a surface unit is turned on, coils beneath the surface unit radiate heat through the glass to the cookware. The red glow of the coils will be visible through the glass. It will take the surface unit a few moments to heat up. The coil cycles on and off to maintain your selected control setting. With poor cookware, you will see frequent cycling of the unit off and on. Good, flat cookware will minimize the cycling.

Use only flat-bottomed cookware. Do not let pots boil dry. Overheated metal can bond to glass cooktop. An overheated copper pot will leave a residue that will permanently stain the glass.

Sliding aluminum cookware across the glass may leave metal marks. These metal marks will appear as small scratches. They can be removed with cleaning cream and a razor scraper.

It is safe to place hot cookware from the oven or surface on the glass surface when the surface is cool.

Avoid sliding pans on the glass cooktop. Pan edges that are even slightly rough or grit on the cooktop can cause scratches on the glass.

Even after the surface units are turned off, the glass cooktop retains enough heat to continue cooking. To avoid overcooking, remove pans from the surface units when the food is cooked. Avoid placing anything on the surface unit until it has cooled completely.

The Hot Surface Lights will stay lit until the cooktop is safe to touch. It is not unusual for the lights to stay lit for 30 minutes.

Cooktop Comparison

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents UseandCare& Installation Guide Save time and money. Before you request service… Help US Help YOU…If you received Damaged range… Important Safety Instructions Important Safety InstructionsOven Self-Cleaning OvenCooktop and Radiant Surface Units Save These InstructionsJBP79 Features of Your RangeFeatures of Your Range Type of Cooktop Description How It Works Radiant HOW does this Cooktop Compare To Your OLD ONE?General Information About Radiant Surface Units Cooktop ComparisonDual Surface Unit Switch How to Set the ControlsCooking Guide for Using Heat Settings Surface ControlsHot Surface Indicator Light Surface ControlsSpecial Notes for Glass Cooktops Types of Cookware Surface Cookware TipsCopper Bottom Porcelain/enamelHow to Check Pan Performance SurfaceResistant, not scratch proof Observe the Following Points in Canning Home Canning TipsCanning should be done on the cooktop only Flat-bottomed canners are required for glass cooktopsCleaning Glass Cooktop CleaningGlass Cooktop Cleaning Home Canning TipsBroil Bake Features of Your Oven ControlFeatures of Your Oven CONTROL, Clock and TimerClock and Timer Oven ControlBefore Using Your Oven Using Your OvenOven Shelves Shelf PositionsBaking UsingYour Oven BakingBaking Pans Pan PlacementBaking Guides CookiesHow to Set Immediate Start and Automatic Stop How to Time BakeTimed Baking Don’t PeekQuick Reminder How to Set Delay Start and Automatic StopTimed Baking Adjust the Oven Thermostat Adjust the Oven ThermostatUse of Aluminum Foil RoastingWhy is my roast crumbling when I try to carve it? Questions and AnswersRoasting Guide For Frozen RoastsWhy are my meats not turning out as brown as they should? BroilingShould I salt the meat before broiling? Broiling Guide BroilingOven door should be open to the broil stop position Before a Clean Cycle Operating the SELF-CLEANING OvenHow to Set the Oven for Cleaning Cleaning OvenAfter a Clean Cycle To Stop a Clean CycleHow to Set Delay Start of Cleaning Care and Cleaning Operating the Self-Cleaning OvenCare Cooktop Surface Light Control Panel and KnobsMetal Parts Glass WindowLift-Off Oven Door Care and CleaningSure Grip Handle Oven Heating ElementsOven Light Replacement How to Remove the Storage Drawer to Clean Under the RangeBroiler Pan and Grid After broiling, removeBefore YOU Begin Installation InstructionsStep Step Wire Power Cord Installation Step Wire Conduit Installation Step Final Check Problem Possible Cause QUESTIONS? USE this Problem SolverAfter Clean Cycle Problem SolverIf YOU Need Service Problem SolverService Problem Solver If YouServices NeedWarranty

10-95 CG specifications

The GE 10-95 CG is a notable locomotive designed to meet the demands of freight transport with efficiency and reliability. Built by General Electric, this model showcases a combination of advanced technology and impressive engineering, making it a prominent choice in the rail industry.

One of the primary features of the GE 10-95 CG is its powerful diesel engine. The locomotive is equipped with a 12-cylinder 7FDL engine, capable of producing substantial horsepower that allows it to handle heavy loads across challenging terrains. This engine configuration not only provides reliability but also ensures operational efficiency, allowing for lower fuel consumption over longer distances.

The 10-95 CG is recognized for its distinct, rugged design that is built to withstand diverse environmental conditions. Its robust frame and sturdy body contribute to its longevity and durability, while the optimized aerodynamics reduce drag, enhancing fuel efficiency. The locomotive's structure is designed for easy access and maintenance, allowing operators to keep it in optimal working condition with minimal downtime.

In terms of technologies, the GE 10-95 CG integrates advanced electronic systems that enhance performance and monitoring. The locomotive features a sophisticated microprocessor-based control system that enables precise engine management, ensuring optimal operation under varying conditions. Additionally, the use of dynamic braking technology provides enhanced control, reducing wear and tear on the braking system while improving safety.

The traction system of the GE 10-95 CG employs alternating current (AC) traction motors, which are known for their efficiency and reduced maintenance requirements compared to traditional DC motors. This technology results in better acceleration and overall performance, making the locomotive adept in both hauling heavy freight and navigating tight curves.

Another notable characteristic of the GE 10-95 CG is its ability to operate in multiple unit configurations. This allows for seamless coupling with other locomotives, enabling operators to scale their freight capacity as needed. The versatility of this locomotive makes it a valuable asset in various rail operations.

In summary, the GE 10-95 CG embodies a blend of power, efficiency, and advanced technology. With features designed for durability, operational efficiency, and ease of maintenance, it stands out as a formidable choice for freight transportation in the rail industry. Its innovative systems and robust performance characteristics ensure that it remains a reliable solution for meeting the demands of modern logistics and transportation.
Top Page Image Contents