GE 10-95 CG warranty Oven CONTROL, Clock and Timer, Features of Your, Oven Control

Page 17

OVEN CONTROL, CLOCK AND TIMER

Clock

The clock must be set for the automatic oven timing functions to work properly. The time of day cannot be changed during a Timed Baking or a Self-Cleaning cycle.

To Set the Clock

1. Press the CLOCK pad.

 

2. Press the + or – pad to

CLOCK

+

set the time of day.

 

 

–

3. Press the CLOCK pad to start.

Features of Your

Timer

The timer is a minute timer only.

The timer does not control oven operations. The maximum setting on the timer is 9 hours and 55 minutes.

To Set the Timer

1.Press the TIMER

TIMER ON/OFF pad.

ON/OFF

2.Press the + or – pad to set the amount of time

+on timer.

–

The timer will start automatically within a few seconds of releasing the pad.

The timer, as you are setting it, will display seconds until 1 minute is reached.

Then it will display minutes and seconds until 10 minutes is reached.

After 10 minutes, it will display hours (“HR” now appears in display) and minutes until the maximum time of 9 hours and 55 minutes is reached.

Oven Control

To Reset the Timer

To Cancel the Timer

If “TIMER” is displayed, press the + or – pad

Press the TIMER ON/OFF pad until the word

until the desired time is reached.

“TIMER” disappears from the display.

If “TIMER” is not displayed, press the TIMER

 

ON/OFF pad first, then follow the instructions above

 

to set the timer.

 

Oven Control,

Power Outage

After a power outage, when power is restored, the display will flash and time shown will no longer be correct—for example, after a 5- minute power interruption the clock will be 5 minutes slow.

All other functions that were in operation when the power went out will have to be programmed again.

End of Cycle Tone

The end of cycle tone is a series of 3 beeps followed by 1 beep every 6 seconds. If you would like to remove the signal that beeps every 6 seconds, press and hold the CLEAR/OFF pad for 10 seconds.

To return the signal that beeps every 6 seconds, press and hold the CLEAR/OFF pad for 10 seconds.

Display Messages

If “door” appears in the display, the door latch handle is not moved all the way to the right. Move the latch handle and cleaning will start. If “LOCK” appears in the display, the oven door is in the locked position. BAKE, BROIL and COOK TIME cannot be set if the door is in the locked position.

Clock and Timer

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents UseandCare& Installation Guide If you received Damaged range… Save time and money. Before you request service…Help US Help YOU… Important Safety Instructions Important Safety InstructionsOven Self-Cleaning OvenCooktop and Radiant Surface Units Save These InstructionsJBP79 Features of Your RangeFeatures of Your Range Type of Cooktop Description How It Works Radiant HOW does this Cooktop Compare To Your OLD ONE?General Information About Radiant Surface Units Cooktop ComparisonDual Surface Unit Switch How to Set the ControlsCooking Guide for Using Heat Settings Surface ControlsSpecial Notes for Glass Cooktops Hot Surface Indicator LightSurface Controls Types of Cookware Surface Cookware TipsCopper Bottom Porcelain/enamelResistant, not scratch proof How to Check Pan PerformanceSurface Observe the Following Points in Canning Home Canning TipsCanning should be done on the cooktop only Flat-bottomed canners are required for glass cooktopsCleaning Glass Cooktop CleaningGlass Cooktop Cleaning Home Canning TipsBroil Bake Features of Your Oven ControlFeatures of Your Oven CONTROL, Clock and TimerClock and Timer Oven ControlBefore Using Your Oven Using Your OvenOven Shelves Shelf PositionsBaking UsingYour Oven BakingBaking Pans Pan PlacementBaking Guides CookiesHow to Set Immediate Start and Automatic Stop How to Time BakeTimed Baking Don’t PeekQuick Reminder How to Set Delay Start and Automatic StopTimed Baking Adjust the Oven Thermostat Adjust the Oven ThermostatUse of Aluminum Foil RoastingWhy is my roast crumbling when I try to carve it? Questions and AnswersRoasting Guide For Frozen RoastsShould I salt the meat before broiling? Why are my meats not turning out as brown as they should?Broiling Oven door should be open to the broil stop position Broiling GuideBroiling Before a Clean Cycle Operating the SELF-CLEANING OvenHow to Set the Oven for Cleaning Cleaning OvenAfter a Clean Cycle To Stop a Clean CycleHow to Set Delay Start of Cleaning Care Care and CleaningOperating the Self-Cleaning Oven Cooktop Surface Light Control Panel and KnobsMetal Parts Glass WindowLift-Off Oven Door Care and CleaningSure Grip Handle Oven Heating ElementsOven Light Replacement How to Remove the Storage Drawer to Clean Under the RangeBroiler Pan and Grid After broiling, removeBefore YOU Begin Installation InstructionsStep Step Wire Power Cord Installation Step Wire Conduit Installation Step Final Check Problem Possible Cause QUESTIONS? USE this Problem SolverAfter Clean Cycle Problem SolverIf YOU Need Service Problem SolverService Problem Solver If YouServices NeedWarranty

10-95 CG specifications

The GE 10-95 CG is a notable locomotive designed to meet the demands of freight transport with efficiency and reliability. Built by General Electric, this model showcases a combination of advanced technology and impressive engineering, making it a prominent choice in the rail industry.

One of the primary features of the GE 10-95 CG is its powerful diesel engine. The locomotive is equipped with a 12-cylinder 7FDL engine, capable of producing substantial horsepower that allows it to handle heavy loads across challenging terrains. This engine configuration not only provides reliability but also ensures operational efficiency, allowing for lower fuel consumption over longer distances.

The 10-95 CG is recognized for its distinct, rugged design that is built to withstand diverse environmental conditions. Its robust frame and sturdy body contribute to its longevity and durability, while the optimized aerodynamics reduce drag, enhancing fuel efficiency. The locomotive's structure is designed for easy access and maintenance, allowing operators to keep it in optimal working condition with minimal downtime.

In terms of technologies, the GE 10-95 CG integrates advanced electronic systems that enhance performance and monitoring. The locomotive features a sophisticated microprocessor-based control system that enables precise engine management, ensuring optimal operation under varying conditions. Additionally, the use of dynamic braking technology provides enhanced control, reducing wear and tear on the braking system while improving safety.

The traction system of the GE 10-95 CG employs alternating current (AC) traction motors, which are known for their efficiency and reduced maintenance requirements compared to traditional DC motors. This technology results in better acceleration and overall performance, making the locomotive adept in both hauling heavy freight and navigating tight curves.

Another notable characteristic of the GE 10-95 CG is its ability to operate in multiple unit configurations. This allows for seamless coupling with other locomotives, enabling operators to scale their freight capacity as needed. The versatility of this locomotive makes it a valuable asset in various rail operations.

In summary, the GE 10-95 CG embodies a blend of power, efficiency, and advanced technology. With features designed for durability, operational efficiency, and ease of maintenance, it stands out as a formidable choice for freight transportation in the rail industry. Its innovative systems and robust performance characteristics ensure that it remains a reliable solution for meeting the demands of modern logistics and transportation.
Top Page Image Contents