Maytag 8113P768-60 manual Cloth first, Glass, Movement, then wipe off excess oil, Stainless Steel

Page 19

Care & Cleaning

PART

PROCEDURE

Oven Window

Avoid using excessive amounts of water which may seep under or behind glass causing staining.

and Door – Glass

Wash with soap and water. Rinse with clear water and dry. Glass cleaner can be used if sprayed on a

 

 

cloth first.

 

• Do not use abrasive materials such as scouring pads, steel wool or powdered cleaners as they will scratch

 

 

glass.

 

 

 

Oven Interior

Follow instructions on pages 15-16 to set a self-clean cycle.

 

 

 

Oven Racks

Clean with soapy water.

 

Remove stubborn soil with cleansing powder or soap-filled scouring pad. Rinse and dry.

 

• Racks will permanently discolor and may not slide smoothly if left in the oven during a self-clean operation.

 

 

If this occurs, wipe the rack edge and rack support with a small amount of vegetable oil to restore ease

 

 

of movement, then wipe off excess oil.

 

 

 

Stainless Steel

DO NOT USE ANY CLEANING PRODUCT CONTAINING CHLORINE BLEACH.

(select models)

DO NOT USE ABRASIVE OR ORANGE CLEANERS.

 

ALWAYS WIPE WITH THE GRAIN WHEN CLEANING.

 

• Daily Cleaning/Light Soil –– Wipe with one of the following - soapy water, white vinegar/water solution,

 

 

Formula 409 Glass and Surface Cleaner* or a similar glass cleaner - using a sponge or soft cloth. Rinse

 

 

and dry. To polish and help prevent fingerprints, follow with Stainless Steel Magic Spray (Part No.

 

 

20000008)**.

 

Moderate/Heavy Soil –– Wipe with one of the following - Bon Ami*, Smart Cleanser*, or Soft Scrub* -

 

 

using a damp sponge or soft cloth. Rinse and dry. Stubborn soils may be removed with a damp multi-

 

 

purpose Scotch-Brite* pad; rub evenly with the grain. Rinse and dry. To restore luster and remove streaks,

 

 

follow with Stainless Steel Magic Spray*.

 

Discoloration –– Using a damp sponge or soft cloth, wipe with Cameo Stainless Steel Cleaner*. Rinse

 

 

immediately and dry. To remove streaks and restore luster, follow with Stainless Steel Magic Spray*.

 

 

 

Storage Drawer,

When cool, wash with warm soapy water, rinse and dry. Never wipe a warm or hot surface with a damp

Door Handle,

 

cloth as this may damage the surface and may cause a steam burn.

Side Panels –

For stubborn soil, use mildly abrasive cleaning agents such as baking soda paste or Bon Ami.* Do not use

Painted Enamel

 

abrasive, caustic or harsh cleaning agents such as steel wool pads or oven cleaners. These products will

 

 

scratch or permanently damage the surface.

 

 

Note: Use a dry towel or cloth to wipe up spills, especially acidic or sugary spills. Surface may

 

 

discolor or dull if soil is not immediately removed. This is especially important for white surfaces.

 

 

 

*Brand names for cleaning products are registered trademarks of the respective manufacturers. ** To order direct, call 1-877-232-6771 USA and 1-800-688-8408 Canada.

18

Image 19
Contents Use and Care Guide Table of ContentsPrecision Touch Control Electric Slide-In Smoothtop Case of Fire Recognize Safety Symbols, Words, LabelsInstructions To Prevent Fire or Smoke DamageUtensil Safety Important Safety InstructionsChild Safety Cooking SafetyCooktop Cleaning SafetySelf-Clean Oven Important Safety Notice and WarningSurface Controls Setting the ControlsSuggested Heat Settings Power BoostTM OptionTips to Protect Smoothtop Surface Smoothtop SurfaceTo Prevent Other Damage Cookware RecommendationsCanning and Oversize Cookware To Prevent StainsClock Using the TouchpadsOven Cooking Control PanelFault Codes TimerLocking the Control Baking Differences Between Your Old and New Oven BakingCook & Hold Baking NotesDelay Cook & Hold Keep Warm Notes To cancel Keep WarmKeep Warm Changing Temp F/CRack Total Foods Position Broiling ChartBroiling Broil NotesAdjusting the Oven Temperature Automatic Shut-Off Sabbath ModeSabbath Mode Notes Oven Light Oven FanOven Vent Rack PositionsTo set Self-Clean Before Self-CleaningTo Delay a Self-Clean Cycle After Self-Cleaning During the Self-Clean CycleCleaning Procedures Care & CleaningPart Procedure Stainless Steel Cloth firstGlass Movement, then wipe off excess oilLeveling Legs MaintenanceOven Door Oven WindowTo replace oven light bulb When oven is cool, hold bulb coverStorage Drawer Oven Light style varies by modelWord is not displayed TroubleshootingProblem Solution To the self-clean cycleContinue to run after use until the oven cools Off. This is normalMaytag Major Appliance Warranty Table des matières Cuisinière électrique encastrableTouches de précision Dessus lisseLes instructions de sécurité importantes et les paragraphes Pour éviter un incendie ou des dommages par la fuméeCuisson et sécurité En cas d’incendieSécurité pour les enfants Familiarisation avec l’appareilHottes d’extraction Ustensiles et sécuritéTable de cuisson FriteusesNettoyer uniquement les pièces mentionnées dans ce guide Four autonettoyantAvertissement et avis important pour la sécurité Conserver ces instructions pour consultation ultérieureSuggestions de réglage Boutons de commandeRéglage des commandes Cuisson sur la surfaceConseils de protection de la surface à dessus lisse Surface à dessus lissePour éviter d’autres dommages Recommandations sur les ustensilesUstensiles de grande taille et pour les conserves Pour éviter les tachesUtilisation des touches Tableau de commandeCuisson dans le four HorlogeCuisson courante Verrouillage des commandesMinuterie Codes d’anomalieDifférences de cuisson entre l’ancien four et le nouveau Cuisson et maintienRemarques sur la cuisson courante au four Maintien au chaud Cuisson et maintien différéeRemarques sur la fonction maintien au chaud Changement de la température F/CAnnulation du maintien au chaud Position Degré DE Temps DE Cuisson Aliments Cuisson au grilRemarques sur la cuisson au gril Tableau de cuisson au grilAjustement de la température du four Arrêt automatique Mode sabbatRemarques sur le mode sabbat Annulation du mode sabbatSole du four Ventilateur du fourÉvent du four Éclairage du fourDémarrage différé d’un cycle d’autonettoyage NettoyageAvant l’autonettoyage Programmation de l’autonettoyageAprès le cycle d’autonettoyage Pendant le cycle d’autonettoyageRemarques Pièce Nettoyage Méthodes de nettoyage’excédent Vaporisant d’abord sur un lingePorte Hublot du four EntretienPorte du four Lampe du fourTiroir de remisage Pieds de réglage de l’aplombDépose Recherche des pannes Problème SolutionPropres Nettoyage recommandés. VoirMarques de métal Marques et taches brunesRemarques Garantie DES Gros Appareils Ménagers Maytag Corporation Tabla de Materias Estufa Eléctrica Deslizante conControl a Precisión Sensible Al Tacto 500 Cubierta LisaFecha de Compra Para Evitar un Incendio o Daño Causado por el HumoCanadá Apague el fuego o la llama cerrando la puerta del horno En Caso de IncendioSeguridad para los Niños Instrucciones GeneralesSeguridad sobre el Uso de Utensilios Seguridad al CocinarCubierta Horno Autolimpiante Ollas FreidorasCampanas de Ventilación Seguridad en la LimpiezaAjustes de calor sugeridos Cocinando en la EstufaControles Superiores Programación de los ControlesConsejos para proteger la cubierta lisa Cubiertas Lisas Prueba de las Ollas Planas Recomendaciones sobre los utensiliosUtensilios para preparar conservas y de tamaños grandes Para evitar otros daños‘Clock’ Reloj Cocinando en el HornoPanel de Control Uso de las Teclas‘Timer’ Temporizador Códigos de ErroresBloqueo de los Controles y de la Puerta del Horno Notas sobre Horneado ‘Cook & Hold’ Cocción y‘Bake’ Horneado Mantener CalienteMantener Caliente Diferido ‘Delay ‘Cook & Hold’’ Cocción yNotas sobre ‘Keep Warm’ Para cancelar ‘Keep Warm’Cambio de la temperatura de F/C ‘Keep Warm’ Mantener CalientePosicion DE Termino DE Tiempo Total DE Alimentos ‘Broiling’ Asar a la ParrillaNotas Sobre Asado a la Parrilla Tabla de Asar a la ParrillaAjuste de la temperatura del horno Cierre Automático Modo SabáticoNotas Sobre el Modo Sabático Panel Inferior del Horno Ventilador del hornoRespiradero del Horno Posiciones de la ParrillaLimpie el marco del horno, el marco de Para programar ‘Self-Clean’ AutolimpiezaAntes de la Autolimpieza Para diferir un ciclo de autolimpiezaDespués del ciclo de autolimpieza Durante el ciclo de autolimpiezaNotas Pieza Procedimiento DE Limpieza Procedimientos de LimpiezaCuidado y Limpieza Ventana del Horno MantenimientoPuerta del Horno Luz del HornoGaveta de Almacenamiento Tornillos NiveladoresLocalización y Solución de Averías Problema SoluciónManchas y estrías marrones Códigos de ErroresMarcas de metal Crema para Limpieza de Cubiertas. Ver págNotas DE Maytag Corporation